1. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  2. 01 Nov, 2013 1 commit
  3. 24 Jul, 2013 1 commit
  4. 30 May, 2013 1 commit
  5. 10 May, 2013 1 commit
  6. 05 May, 2013 1 commit
  7. 12 Apr, 2013 2 commits
  8. 08 Jan, 2013 1 commit
  9. 15 Oct, 2012 1 commit
    • Benoît Thébaudeau's avatar
      mx25: Clean up lowlevel_init · 85d993ce
      Benoît Thébaudeau authored
      Clean up mx25 lowlevel_init:
       - Add comments.
       - Do not use write32 repeatedly with the same value in order not to increase
         code size.
       - Make register values configurable.
       - Use macro parameters with default values instead of literal constants.
       - Use defined macros instead of duplicating code.
      Signed-off-by: default avatarBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
      Cc: Stefano Babic <sbabic@denx.de>
      Cc: John Rigby <jcrigby@gmail.com>
      Cc: Matthias Weisser <weisserm@arcor.de>
      85d993ce
  10. 23 Sep, 2012 1 commit
    • Benoît Thébaudeau's avatar
      KARO TX25: Fix NAND Flash R/W cycle times · 5527024f
      Benoît Thébaudeau authored
      The NAND Flash of the KARO TX25 board is a Samsung K9F1G08U0B with 25-ns R/W
      cycle times. However, the NFC clock for this board was set to 66.5 MHz, so using
      the NFC driver in symmetric mode (i.e. 1 NFC clock cycle = 1 NF R/W cycle)
      resulted in NF R/W cycle times of 15 ns, hence corrupted NF accesses.
      
      This patch fixes this issue by setting the NFC clock to the highest frequency
      complying to the 25-ns NF R/W cycle times specification, i.e. 33.25 MHz.
      Signed-off-by: default avatarBenoît Thébaudeau <benoit.thebaudeau@advansee.com>
      Cc: John Rigby <jcrigby@gmail.com>
      Cc: Scott Wood <scottwood@freescale.com>
      Cc: Stefano Babic <sbabic@denx.de>
      Cc: Daniel Gachet <Daniel.Gachet@hefr.ch>
      Acked-by: default avatarStefano Babic <sbabic@denx.de>
      5527024f
  11. 01 Sep, 2012 2 commits
  12. 10 Aug, 2012 1 commit
  13. 07 Jul, 2012 1 commit
  14. 03 Nov, 2011 1 commit
  15. 27 Oct, 2011 1 commit
  16. 21 Oct, 2011 1 commit
  17. 15 Oct, 2011 1 commit
  18. 30 Sep, 2011 1 commit
  19. 12 Sep, 2011 1 commit
    • Fabio Estevam's avatar
      MX25: tx25: Fix build by making use of GPIO framework · c2205f4d
      Fabio Estevam authored
      Make use of GPIO framework and avoid the following build error:
      
      tx25.c: In function 'tx25_fec_init':
      tx25.c:73: error: dereferencing pointer to incomplete type
      tx25.c:74: error: dereferencing pointer to incomplete type
      tx25.c:75: error: dereferencing pointer to incomplete type
      tx25.c:76: error: dereferencing pointer to incomplete type
      tx25.c:83: error: dereferencing pointer to incomplete type
      tx25.c:84: error: dereferencing pointer to incomplete type
      tx25.c:114: error: dereferencing pointer to incomplete type
      tx25.c:115: error: dereferencing pointer to incomplete type
      tx25.c:116: error: dereferencing pointer to incomplete type
      tx25.c:117: error: dereferencing pointer to incomplete type
      tx25.c:124: error: dereferencing pointer to incomplete type
      tx25.c:125: error: dereferencing pointer to incomplete type
      tx25.c:126: error: dereferencing pointer to incomplete type
      Signed-off-by: default avatarFabio Estevam <fabio.estevam@freescale.com>
      Acked-by: default avatarStefano Babic <sbabic@denx.de>
      c2205f4d
  20. 17 Jul, 2011 1 commit
  21. 14 Jul, 2011 1 commit
  22. 27 Apr, 2011 1 commit
  23. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  24. 18 Oct, 2010 1 commit
    • Wolfgang Denk's avatar
      Rename TEXT_BASE into CONFIG_SYS_TEXT_BASE · 14d0a02a
      Wolfgang Denk authored
      The change is currently needed to be able to remove the board
      configuration scripting from the top level Makefile and replace it by
      a simple, table driven script.
      
      Moving this configuration setting into the "CONFIG_*" name space is
      also desirable because it is needed if we ever should move forward to
      a Kconfig driven configuration system.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      14d0a02a
  25. 13 Oct, 2010 1 commit
  26. 19 Sep, 2010 1 commit
    • Heiko Schocher's avatar
      ARM: implement relocation for ARM926 · ab86f72c
      Heiko Schocher authored
      Change the implementation for arm926 to relocate the code to
      an arbitrary address in RAM.
      
      Adapt the TX25 (i.MX25), magnesium board to test the changes.
      
      On the tx25 board TEXT_BASE is set to the final relocation
      address to prevent one more copying of u-boot code
      when relocating. More info see:
      doc/README.arm-relocation
      
      da850 board:
      Tested-by: default avatarBen Gardiner <bengardiner@nanometrics.ca>
      
      Portions of this work were supported by funding from
      the CE Linux Forum.
      Signed-off-by: default avatarHeiko Schocher <hs@denx.de>
      Cc: Ben Gardiner <bengardiner@nanometrics.ca>
      ab86f72c
  27. 10 May, 2010 1 commit
  28. 05 May, 2010 1 commit
  29. 12 Mar, 2010 1 commit
  30. 07 Mar, 2010 1 commit