1. 08 Aug, 2018 1 commit
    • Ye Li's avatar
      MLK-19132-2 fastboot: Disable BCB_SUPPORT config at default · 06de519a
      Ye Li authored
      The BCB_SUPPORT is not needed by fastboot to support uuu, change it to
      disabled at default. Android header file explicitly enables this
      config, so there is no impact to android.
      
      Also remove the CONFIG_BCB_SUPPORT from whilelist, since we already add
      it in kconfig.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit 36fd8fd0d5f34d69ef9a1a3833f3f052d64a25b3)
      06de519a
  2. 19 Jul, 2018 1 commit
  3. 18 Jul, 2018 1 commit
    • Ye Li's avatar
      MLK-18945-2 video: Update mipi dsi northwest to implement bridge interface · a668cdb1
      Ye Li authored
      Update the mipi_dsi_northwest driver to implement mipi dsi bridge interfaces
      and register it as a bridge controller. Users can call bridge common interfaces
      to access the northwest driver, don't need to call its private driver functions.
      
      We also add a kconfig entry for this driver, the name is changed to
      CONFIG_IMX_NORTHWEST_MIPI_DSI
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      a668cdb1
  4. 17 Jul, 2018 1 commit
  5. 26 Jun, 2018 1 commit
  6. 16 Apr, 2018 1 commit
  7. 02 Apr, 2018 2 commits
  8. 28 Mar, 2018 1 commit
  9. 02 Nov, 2017 10 commits
  10. 06 Apr, 2017 1 commit
  11. 05 Apr, 2017 6 commits
    • Adrian Alonso's avatar
      MLK-13130: configs: mx6qarm2: android lpddr2 pop support · 41a5d287
      Adrian Alonso authored
      Add Android support for mx6qarm2 lpddr2 pop target
      Signed-off-by: 's avatarAdrian Alonso <adrian.alonso@nxp.com>
      (cherry picked from commit 6356f2b420f3571493755f6b3a307a66a539b60c)
      41a5d287
    • Ye Li's avatar
      MLK-13929-2 video: Add mipi panel driver for hx8363 · d65bbb05
      Ye Li authored
      Add the mipi dsi panel driver for device HX8363 from kernel. The panel
      driver needs work with mipi_dsi_northwest driver.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit 0c6d0f4202bae7f61d38ecff1c9d255261f022f2)
      d65bbb05
    • Ye Li's avatar
      MLK-13929-1 video: Add MIPI DSI host controller driver for i.MX7ULP · 1e984bba
      Ye Li authored
      Add the host driver base from kernel for MIPI DSI controller on i.MX7ULP.
      The controller provides a DPI-2 interface for LCDIF video stream, and a APB interface
      for packet transmission.
      
      The driver provides APIs to register a MIPI panel device and its driver. The panel
      driver can use the write packet function provided by the host driver to send control
      packets to panel device via APB interface.
      
      MIPI DSI has its PHY and dedicated PLL. The driver will setup them when enabling the DSI
      host.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit e02115dd1c5d36ec06eabcb5a0b8e09aaf0f29a0)
      1e984bba
    • Ye Li's avatar
      MLK-12531 mx6sxsabresd: Add CM4 fast boot up demo · b1200eb2
      Ye Li authored
      This is a demo that CM4 will boot up by u-boot without typing any
      command. It boots up at u-boot early init, try to minimize the time
      from power up to the CM4 running.
      Since CM4 runs on QSPI NOR XIP, we have to disable the QSPI driver in
      u-boot to avoid conflict.
      
      RDC for shared GPIO1 is added, but not enabled, because the kernel is
      not ready for shared GPIO1. Users can uncomment the CONFIG_IMX_RDC to
      enable it.
      
      Some legacy codes in mx6sxsabreauto are removed. We only need this work
      on mx6sxsabresd as a demo.
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit f66842f79d4e33ace45762466eed23a86d367642)
      b1200eb2
    • Ye Li's avatar
      MLK-12493-1 Add support for various boot device · b3b794bf
      Ye Li authored
      Add support for various boot devices like NAND, QSPINOR, SPINOR,
      eMMC, EIMNOR, SATA.
      
      Modify board level files to support the feature and add corresponding defconfig files
      Signed-off-by: 's avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit 72c35e80b86f7f75a52db45959793882bb730793)
      b3b794bf
    • Ye.Li's avatar
      ENGR00315894-81 gis: Add gis module · a8e94954
      Ye.Li authored
      Add gis module, current gis is support vadc input.
      Add power down function to lcdif driver.
      Signed-off-by: 's avatarSandor Yu <R01008@freescale.com>
      Signed-off-by: 's avatarYe.Li <B37916@freescale.com>
      (cherry picked from commit a007b00dd8ef9f773dfdebef0b1deb0990281793)
      (cherry picked from commit a31dcdafb0963381e7213c59f79a340ef27ec2e2)
      (cherry picked from commit 02dfe2e4af5f51d39a51542fb0e81f93faf505bc)
      a8e94954
  12. 13 Mar, 2017 1 commit
  13. 10 Mar, 2017 1 commit
    • Tom Rini's avatar
      ARM: Migrate errata to Kconfig · 8dda2e2f
      Tom Rini authored
      This moves all of the current ARM errata from various header files and in to
      Kconfig.  This allows for a minor amount of cleanup as we had some instances
      where both a general common header file was enabling errata as well as the
      board config.  We now just select these once at the higher level in Kconfig
      Signed-off-by: 's avatarTom Rini <trini@konsulko.com>
      8dda2e2f
  14. 09 Mar, 2017 1 commit
  15. 18 Feb, 2017 1 commit
  16. 12 Feb, 2017 1 commit
  17. 08 Feb, 2017 5 commits
  18. 06 Feb, 2017 3 commits
  19. 31 Jan, 2017 1 commit
    • Masahiro Yamada's avatar
      mmc: move CONFIG_GENERIC_MMC to Kconfig · 54925327
      Masahiro Yamada authored
      Now, CONFIG_GENERIC_MMC seems equivalent to CONFIG_MMC.
      
      Let's create an entry for "config GENERIC_MMC" with "default MMC",
      then convert all macro defines in headers to Kconfig.  Almost all
      of the defines will go away.
      
      I see only two exceptions:
        configs/blanche_defconfig
        configs/sandbox_noblk_defconfig
      
      They define CONFIG_GENERIC_MMC, but not CONFIG_MMC.  Something
      might be wrong with these two boards, so should be checked later.
      
      Anyway, this is the output of the moveconfig tool.
      
      This commit was created as follows:
      
      [1] create a config entry in drivers/mmc/Kconfig
      
      [2] tools/moveconfig.py -r HEAD GENERIC_MMC
      
      [3] manual clean-up of garbage comments in doc/README.* and
          include/configs/*.h
      Signed-off-by: 's avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Reviewed-by: 's avatarTom Rini <trini@konsulko.com>
      54925327