1. 30 Jul, 2014 2 commits
    • Masahiro Yamada's avatar
      Add board MAINTAINERS files · 93d4334f
      Masahiro Yamada authored
      We have switched to Kconfig and the boards.cfg file is going to
      be removed. We have to retrieve the board status and maintainers
      information from it.
      
      The MAINTAINERS format as in Linux Kernel would be nice
      because we can crib the scripts/get_maintainer.pl script.
      
      After some discussion, we chose to put a MAINTAINERS file under each
      board directory, not the top-level one because we want to collect
      relevant information for a board into a single place.
      
      TODO:
      Modify get_maintainer.pl to scan multiple MAINTAINERS files.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Suggested-by: default avatarTom Rini <trini@ti.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      93d4334f
    • Masahiro Yamada's avatar
      kconfig: add board Kconfig and defconfig files · dd84058d
      Masahiro Yamada authored
      This commit adds:
       - arch/${ARCH}/Kconfig
          provide a menu to select target boards
       - board/${VENDOR}/${BOARD}/Kconfig or board/${BOARD}/Kconfig
          set CONFIG macros to the appropriate values for each board
       - configs/${TARGET_BOARD}_defconfig
          default setting of each board
      
      (This commit was automatically generated by a conversion script
      based on boards.cfg)
      
      In Linux Kernel, defconfig files are located under
      arch/${ARCH}/configs/ directory.
      It works in Linux Kernel since ARCH is always given from the
      command line for cross compile.
      
      But in U-Boot, ARCH is not given from the command line.
      Which means we cannot know ARCH until the board configuration is done.
      That is why all the "*_defconfig" files should be gathered into a
      single directory ./configs/.
      Signed-off-by: default avatarMasahiro Yamada <yamada.m@jp.panasonic.com>
      Acked-by: default avatarSimon Glass <sjg@chromium.org>
      dd84058d
  2. 01 Nov, 2013 1 commit
  3. 14 Oct, 2013 1 commit
  4. 24 Jul, 2013 1 commit
  5. 22 Jul, 2012 2 commits
  6. 15 Oct, 2011 1 commit
  7. 17 Nov, 2010 1 commit
    • Sebastien Carlier's avatar
      Switch from archive libraries to partial linking · 6d8962e8
      Sebastien Carlier authored
      Before this commit, weak symbols were not overridden by non-weak symbols
      found in archive libraries when linking with recent versions of
      binutils.  As stated in the System V ABI, "the link editor does not
      extract archive members to resolve undefined weak symbols".
      
      This commit changes all Makefiles to use partial linking (ld -r) instead
      of creating library archives, which forces all symbols to participate in
      linking, allowing non-weak symbols to override weak symbols as intended.
      This approach is also used by Linux, from which the gmake function
      cmd_link_o_target (defined in config.mk and used in all Makefiles) is
      inspired.
      
      The name of each former library archive is preserved except for
      extensions which change from ".a" to ".o".  This commit updates
      references accordingly where needed, in particular in some linker
      scripts.
      
      This commit reveals board configurations that exclude some features but
      include source files that depend these disabled features in the build,
      resulting in undefined symbols.  Known such cases include:
      - disabling CMD_NET but not CMD_NFS;
      - enabling CONFIG_OF_LIBFDT but not CONFIG_QE.
      Signed-off-by: default avatarSebastien Carlier <sebastien.carlier@gmail.com>
      6d8962e8
  8. 18 Oct, 2010 3 commits
  9. 21 Sep, 2010 1 commit
    • Michael Zaidman's avatar
      POST cleanup. · 800eb096
      Michael Zaidman authored
      - Revives POST for blackfin arch;
      - Removes redundant code:
           arch/blackfin/lib/post.c
           arch/powerpc/cpu/ppc4xx/commproc.c
           arch/powerpc/cpu/mpc512x/common.c
      - fixes up the post_word_{load|store} usage.
      Signed-off-by: default avatarMichael Zaidman <michael.zaidman@gmail.com>
      Acked-by: default avatarDetlev Zundel <dzu@denx.de>
      Tested-by: default avatarAnatolij Gustschin <agust@denx.de>
      
      List of the maintainers of the affected by patch boards:
      Cc: Stephan Linz <linz@li-pro.net>
      Cc: Denis Peter <d.peter@mpl.ch>
      Cc: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
      Cc: Peter Tyser <ptyser@xes-inc.com>
      Cc: Stefan Roese <sr@denx.de>
      Cc: Mike Frysinger <vapier@gentoo.org>
      Cc: Niklaus Giger <niklaus.giger@netstal.com>
      Cc: Larry Johnson <lrj@acm.org>
      Cc: Feng Kan <fkan@amcc.com>
      800eb096
  10. 04 Jul, 2010 1 commit
    • Wolfgang Denk's avatar
      Make sure that argv[] argument pointers are not modified. · 54841ab5
      Wolfgang Denk authored
      The hush shell dynamically allocates (and re-allocates) memory for the
      argument strings in the "char *argv[]" argument vector passed to
      commands.  Any code that modifies these pointers will cause serious
      corruption of the malloc data structures and crash U-Boot, so make
      sure the compiler can check that no such modifications are being done
      by changing the code into "char * const argv[]".
      
      This modification is the result of debugging a strange crash caused
      after adding a new command, which used the following argument
      processing code which has been working perfectly fine in all Unix
      systems since version 6 - but not so in U-Boot:
      
      int main (int argc, char **argv)
      {
      	while (--argc > 0 && **++argv == '-') {
      /* ====> */	while (*++*argv) {
      			switch (**argv) {
      			case 'd':
      				debug++;
      				break;
      			...
      			default:
      				usage ();
      			}
      		}
      	}
      	...
      }
      
      The line marked "====>" will corrupt the malloc data structures and
      usually cause U-Boot to crash when the next command gets executed by
      the shell.  With the modification, the compiler will prevent this with
      an
      	error: increment of read-only location '*argv'
      
      N.B.: The code above can be trivially rewritten like this:
      
      	while (--argc > 0 && **++argv == '-') {
      		char *arg = *argv;
      		while (*++arg) {
      			switch (*arg) {
      			...
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      Acked-by: default avatarMike Frysinger <vapier@gentoo.org>
      54841ab5
  11. 21 Mar, 2010 1 commit
  12. 12 Jun, 2009 1 commit
    • Wolfgang Denk's avatar
      General help message cleanup · a89c33db
      Wolfgang Denk authored
      Many of the help messages were not really helpful; for example, many
      commands that take no arguments would not print a correct synopsis
      line, but "No additional help available." which is not exactly wrong,
      but not helpful either.
      
      Commit ``Make "usage" messages more helpful.'' changed this
      partially. But it also became clear that lots of "Usage" and "Help"
      messages (fields "usage" and "help" in struct cmd_tbl_s respective)
      were actually redundant.
      
      This patch cleans this up - for example:
      
      Before:
      	=> help dtt
      	dtt - Digital Thermometer and Thermostat
      
      	Usage:
      	dtt         - Read temperature from digital thermometer and thermostat.
      
      After:
      	=> help dtt
      	dtt - Read temperature from Digital Thermometer and Thermostat
      
      	Usage:
      	dtt
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      a89c33db
  13. 28 Jan, 2009 1 commit
    • Peter Tyser's avatar
      Command usage cleanup · 2fb2604d
      Peter Tyser authored
      Remove command name from all command "usage" fields and update
      common/command.c to display "name - usage" instead of
      just "usage". Also remove newlines from command usage fields.
      Signed-off-by: default avatarPeter Tyser <ptyser@xes-inc.com>
      2fb2604d
  14. 18 Oct, 2008 1 commit
  15. 03 Sep, 2008 2 commits
  16. 10 Jul, 2008 1 commit
  17. 02 Jul, 2008 1 commit
  18. 12 Jun, 2008 1 commit
    • Becky Bruce's avatar
      Change initdram() return type to phys_size_t · 9973e3c6
      Becky Bruce authored
      This patch changes the return type of initdram() from long int to phys_size_t.
      This is required for a couple of reasons: long int limits the amount of dram
      to 2GB, and u-boot in general is moving over to phys_size_t to represent the
      size of physical memory.  phys_size_t is defined as an unsigned long on almost
      all current platforms.
      
      This patch *only* changes the return type of the initdram function (in
      include/common.h, as well as in each board's implementation of initdram).  It
      does not actually modify the code inside the function on any of the platforms;
      platforms which wish to support more than 2GB of DRAM will need to modify
      their initdram() function code.
      
      Build tested with MAKEALL for ppc, arm, mips, mips-el. Booted on powerpc
      MPC8641HPCN.
      Signed-off-by: default avatarBecky Bruce <becky.bruce@freescale.com>
      9973e3c6
  19. 20 May, 2008 1 commit
    • Wolfgang Denk's avatar
      Big white-space cleanup. · 53677ef1
      Wolfgang Denk authored
      This commit gets rid of a huge amount of silly white-space issues.
      Especially, all sequences of SPACEs followed by TAB characters get
      removed (unless they appear in print statements).
      
      Also remove all embedded "vim:" and "vi:" statements which hide
      indentation problems.
      Signed-off-by: default avatarWolfgang Denk <wd@denx.de>
      53677ef1
  20. 10 Jul, 2007 1 commit
  21. 09 Jul, 2007 1 commit
  22. 03 Jul, 2007 2 commits
  23. 01 Nov, 2006 1 commit
  24. 08 Oct, 2006 1 commit
  25. 01 Sep, 2006 1 commit
    • Marian Balakowicz's avatar
      Add support for a saving build objects in a separate directory. · f9328639
      Marian Balakowicz authored
      Modifications are based on the linux kernel approach and
      support two use cases:
      
        1) Add O= to the make command line
        'make O=/tmp/build all'
      
        2) Set environement variable BUILD_DIR to point to the desired location
        'export BUILD_DIR=/tmp/build'
        'make'
      
      The second approach can also be used with a MAKEALL script
      'export BUILD_DIR=/tmp/build'
      './MAKEALL'
      
      Command line 'O=' setting overrides BUILD_DIR environent variable.
      
      When none of the above methods is used the local build is performed and
      the object files are placed in the source directory.
      f9328639
  26. 02 May, 2006 1 commit
  27. 21 Apr, 2006 1 commit