1. 12 Mar, 2014 1 commit
  2. 12 Mar, 2013 1 commit
    • Albert ARIBAUD's avatar
      Refactor linker-generated arrays · ef123c52
      Albert ARIBAUD authored
      Refactor linker-generated array code so that symbols
      which were previously linker-generated are now compiler-
      generated. This causes relocation records of type
      R_ARM_ABS32 to become R_ARM_RELATIVE, which makes
      code which uses LGA able to run before relocation as
      well as after.
      Note: this affects more than ARM targets, as linker-
      lists span possibly all target architectures, notably
      Signed-off-by: 's avatarAlbert ARIBAUD <albert.u.boot@aribaud.net>
  3. 22 Oct, 2012 1 commit
    • Marek Vasut's avatar
      common: Convert the U-Boot commands to LG-arrays · 6c7c946c
      Marek Vasut authored
      This patch converts the old method of creating a list of command
      onto the new LG-arrays code. The old u_boot_cmd section is converted
      to new u_boot_list_cmd subsection and LG-array macros used as needed.
      Minor adjustments had to be made to the common code to work with the
      LG-array macros, mostly the fixup_cmdtable() calls are now passed the
      ll_entry_start and ll_entry_count instead of linker-generated symbols.
      The command.c had to be adjusted as well so it would use the newly
      introduced LG-array API instead of directly using linker-generated
      Signed-off-by: 's avatarMarek Vasut <marex@denx.de>
      Cc: Joe Hershberger <joe.hershberger@gmail.com>
      Cc: Mike Frysinger <vapier@gentoo.org>
  4. 26 Sep, 2012 1 commit
  5. 14 Feb, 2012 1 commit
  6. 01 Jul, 2003 1 commit
  7. 31 May, 2003 1 commit
    • wdenk's avatar
      * Patch by Marc Singer, 29 May 2003: · 7a8e9bed
      wdenk authored
        Fixed rarp boot method for IA32 and other little-endian CPUs.
      * Patch by Marc Singer, 28 May 2003:
        Added port I/O commands.
      * Patch by Matthew McClintock, 28 May 2003
        - cpu/mpc824x/start.S: fix relocation code when booting from RAM
        - minor patches for utx8245
      * Patch by Daniel Engström, 28 May 2003:
        x86 update
      * Patch by Dave Ellis, 9 May 2003 + 27 May 2003:
        add nand flash support to SXNI855T configuration
        fix/extend nand flash support:
        - fix 'nand erase' command so does not erase bad blocks
        - fix 'nand write' command so does not write to bad blocks
        - fix nand_probe() so handles no flash detected properly
        - add doc/README.nand
        - add .jffs2 and .oob options to nand read/write
        - add 'nand bad' command to list bad blocks
        - add 'clean' option to 'nand erase' to write JFFS2 clean markers
        - make NAND read/write faster
      * Patch by Rune Torgersen, 23 May 2003:
        Update for MPC8266ADS board
  8. 20 Apr, 2003 1 commit
    • wdenk's avatar
      * Make sure Block Lock Bits get cleared in R360MPI flash driver · d791b1dc
      wdenk authored
      * MPC823 LCD driver: Fill color map backwards, to allow for steady
        display when Linux takes over
      * Patch by Erwin Rol, 27 Feb 2003:
        Add support for RTEMS (this time for real).
      * Add support for "bmp info" and "bmp display" commands to load
        bitmap images; this can be used (for example in a "preboot"
        command) to display a splash screen very quickly after poweron.
      * Add support for 133 MHz clock on INCA-IP board
  9. 11 Nov, 2002 1 commit
    • wdenk's avatar
      * Patch by Jim Sandoz, 07 Nov 2002: · 1d0350ed
      wdenk authored
        Increase number of network RX buffers (PKTBUFSRX in
        "include/net.h") for EEPRO100 based boards (especially SP8240)
        which showed "Receiver is not ready" errors when U-Boot was
        processing the receive buffers slower than the network controller
        was filling them.
      * Get rid of obsolete include/mpc74xx.h
  10. 03 Nov, 2002 1 commit