am571x-idk.dts 3.86 KB
Newer Older
1
// SPDX-License-Identifier: GPL-2.0-only
2 3 4 5 6
/*
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
 */
/dts-v1/;

7
#include "am5718.dtsi"
8 9
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
10
#include "dra7-mmc-iodelay.dtsi"
11
#include "dra72x-mmc-iodelay.dtsi"
12
#include "am57xx-idk-common.dtsi"
13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63

/ {
	model = "TI AM5718 IDK";
	compatible = "ti,am5718-idk", "ti,am5718", "ti,dra7";

	memory@80000000 {
		device_type = "memory";
		reg = <0x0 0x80000000 0x0 0x40000000>;
	};

	leds {
		compatible = "gpio-leds";
		cpu0-led {
			label = "status0:red:cpu0";
			gpios = <&gpio2 25 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "cpu0";
		};

		usr0-led {
			label = "status0:green:usr";
			gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		heartbeat-led {
			label = "status0:blue:heartbeat";
			gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "heartbeat";
		};

		usr1-led {
			label = "status1:red:usr";
			gpios = <&gpio2 28 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		usr2-led {
			label = "status1:green:usr";
			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		mmc0-led {
			label = "status1:blue:mmc0";
			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
			default-state = "off";
			linux,default-trigger = "mmc0";
		};
	};
64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100 101 102 103 104 105 106 107 108 109 110 111 112 113 114 115 116 117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139

	idk-leds {
		status = "disabled";
		compatible = "gpio-leds";
		red0-led {
			label = "idk:red0";
			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		green0-led {
			label = "idk:green0";
			gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		blue0-led {
			label = "idk:blue0";
			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		red1-led {
			label = "idk:red1";
			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		green1-led {
			label = "idk:green1";
			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		blue1-led {
			label = "idk:blue1";
			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		red2-led {
			label = "idk:red2";
			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		green2-led {
			label = "idk:green2";
			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		blue2-led {
			label = "idk:blue2";
			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		red3-led {
			label = "idk:red3";
			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		green3-led {
			label = "idk:green3";
			gpios = <&gpio7 25 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};

		blue3-led {
			label = "idk:blue3";
			gpios = <&gpio7 24 GPIO_ACTIVE_HIGH>;
			default-state = "off";
		};
	};
140 141
};

142 143 144 145
&extcon_usb2 {
	id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
	vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
};
146

147 148 149 150
&sn65hvs882 {
	load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
};

151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166
&mailbox5 {
	status = "okay";
	mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
		status = "okay";
	};
	mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
		status = "okay";
	};
};

&mailbox6 {
	status = "okay";
	mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
		status = "okay";
	};
};
167 168 169

&pcie1_rc {
	status = "okay";
170
	gpios = <&gpio5 18 GPIO_ACTIVE_HIGH>;
171 172
};

173
&mmc1 {
174
	pinctrl-names = "default", "hs";
175
	pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
176 177 178 179
	pinctrl-1 = <&mmc1_pins_hs>;
};

&mmc2 {
180
	pinctrl-names = "default", "hs", "ddr_3_3v";
181 182 183 184
	pinctrl-0 = <&mmc2_pins_default>;
	pinctrl-1 = <&mmc2_pins_hs>;
	pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
};
185 186 187 188 189 190 191 192

&mac_sw {
	pinctrl-names = "default", "sleep";
	status = "okay";
};

&cpsw_port1 {
	phy-handle = <&ethphy0_sw>;
193
	phy-mode = "rgmii-rxid";
194 195 196 197 198
	ti,dual-emac-pvid = <1>;
};

&cpsw_port2 {
	phy-handle = <&ethphy1_sw>;
199
	phy-mode = "rgmii-rxid";
200 201 202 203 204 205 206 207 208 209 210 211
	ti,dual-emac-pvid = <2>;
};

&davinci_mdio_sw {
	ethphy0_sw: ethernet-phy@0 {
		reg = <0>;
	};

	ethphy1_sw: ethernet-phy@1 {
		reg = <1>;
	};
};