Commit 4b114a67 authored by Amit Kucheria's avatar Amit Kucheria Committed by Greg Kroah-Hartman
Browse files

arm64: dts: qcom: msm8916: remove unit name for thermal trip points

[ Upstream commit fe2aff0c

 ]

The thermal trip points have unit name but no reg property, so we can
remove them. It also fixes the following warnings from 'make dtbs_check'
after adding the thermal yaml bindings.

arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/apq8016-sbc.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'

arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
gpu-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
camera-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
arch/arm64/boot/dts/qcom/msm8916-mtp.dt.yaml: thermal-zones:
modem-thermal:trips: 'trip-point@0' does not match any of the regexes:
'^[a-zA-Z][a-zA-Z0-9\\-_]{0,63}$', 'pinctrl-[0-9]+'
Signed-off-by: default avatarAmit Kucheria <amit.kucheria@linaro.org>
Link: https://lore.kernel.org/r/2d3d045c18a2fb85b28cf304aa11ae6e6538d75e.1585562459.git.amit.kucheria@linaro.org

Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: default avatarSasha Levin <sashal@kernel.org>
parent cb0eac51
......@@ -261,7 +261,7 @@ cpu2_3-thermal {
thermal-sensors = <&tsens 4>;
trips {
cpu2_3_alert0: trip-point@0 {
cpu2_3_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
......@@ -291,7 +291,7 @@ gpu-thermal {
thermal-sensors = <&tsens 2>;
trips {
gpu_alert0: trip-point@0 {
gpu_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "passive";
......@@ -311,7 +311,7 @@ camera-thermal {
thermal-sensors = <&tsens 1>;
trips {
cam_alert0: trip-point@0 {
cam_alert0: trip-point0 {
temperature = <75000>;
hysteresis = <2000>;
type = "hot";
......@@ -326,7 +326,7 @@ modem-thermal {
thermal-sensors = <&tsens 0>;
trips {
modem_alert0: trip-point@0 {
modem_alert0: trip-point0 {
temperature = <85000>;
hysteresis = <2000>;
type = "hot";
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment