Skip to content

L
linux-next
Commit 79b7bc0a authored by Martin Kepplinger's avatar Martin Kepplinger
Browse files
Options

Merge tag 'v5.7.7' into stable/5.7.7 

Linux 5.7.7
parents 5438cc63 fb6c7905
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 7295 additions and 3794 deletions
Makefile
View file @ 79b7bc0a
# SPDX-License-Identifier: GPL-2.0
VERSION = 5
PATCHLEVEL = 7
SUBLEVEL = 5
SUBLEVEL = 7
EXTRAVERSION =
NAME = Kleptomaniac Octopus
......
arch/arm/boot/dts/am335x-pocketbeagle.dts
View file @ 79b7bc0a
......@@ -88,7 +88,6 @@ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
>;
};
......
arch/arm/boot/dts/am33xx.dtsi
View file @ 79b7bc0a
......@@ -335,7 +335,7 @@ usb: target-module@47400000 {
<0x47400010 0x4>;
reg-names = "rev", "sysc";
ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
SYSC_OMAP2_SOFTRESET)>;
SYSC_OMAP4_SOFTRESET)>;
ti,sysc-midle = <SYSC_IDLE_FORCE>,
<SYSC_IDLE_NO>,
<SYSC_IDLE_SMART>;
......@@ -347,7 +347,7 @@ usb: target-module@47400000 {
clock-names = "fck";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x47400000 0x5000>;
ranges = <0x0 0x47400000 0x8000>;
usb0_phy: usb-phy@1300 {
compatible = "ti,am335x-usb-phy";
......
arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts
View file @ 79b7bc0a
......@@ -112,13 +112,13 @@ &uart5 {
&kcs2 {
// BMC KCS channel 2
status = "okay";
kcs_addr = <0xca8>;
aspeed,lpc-io-reg = <0xca8>;
};
&kcs3 {
// BMC KCS channel 3
status = "okay";
kcs_addr = <0xca2>;
aspeed,lpc-io-reg = <0xca2>;
};
&mac0 {
......
arch/arm/boot/dts/aspeed-g5.dtsi
View file @ 79b7bc0a
......@@ -426,22 +426,22 @@ lpc_bmc: lpc-bmc@0 {
#size-cells = <1>;
ranges = <0x0 0x0 0x80>;
kcs1: kcs1@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs1: kcs@24 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
interrupts = <8>;
kcs_chan = <1>;
status = "disabled";
};
kcs2: kcs2@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs2: kcs@28 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
interrupts = <8>;
kcs_chan = <2>;
status = "disabled";
};
kcs3: kcs3@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs3: kcs@2c {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
interrupts = <8>;
kcs_chan = <3>;
status = "disabled";
};
};
......@@ -455,10 +455,10 @@ lpc_host: lpc-host@80 {
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
kcs4: kcs4@0 {
compatible = "aspeed,ast2500-kcs-bmc";
kcs4: kcs@94 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
interrupts = <8>;
kcs_chan = <4>;
status = "disabled";
};
......
arch/arm/boot/dts/aspeed-g6.dtsi
View file @ 79b7bc0a
......@@ -65,6 +65,7 @@ timer {
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
clocks = <&syscon ASPEED_CLK_HPLL>;
arm,cpu-registers-not-fw-configured;
always-on;
};
ahb {
......@@ -368,6 +369,7 @@ timer: timer@1e782000 {
<&gic GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&syscon ASPEED_CLK_APB1>;
clock-names = "PCLK";
status = "disabled";
};
uart1: serial@1e783000 {
......@@ -433,22 +435,23 @@ lpc_bmc: lpc-bmc@0 {
#size-cells = <1>;
ranges = <0x0 0x0 0x80>;
kcs1: kcs1@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs1: kcs@24 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <1>;
status = "disabled";
};
kcs2: kcs2@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs2: kcs@28 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <2>;
status = "disabled";
};
kcs3: kcs3@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs3: kcs@2c {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <3>;
status = "disabled";
};
};
......@@ -462,10 +465,10 @@ lpc_host: lpc-host@80 {
#size-cells = <1>;
ranges = <0x0 0x80 0x1e0>;
kcs4: kcs4@0 {
compatible = "aspeed,ast2600-kcs-bmc";
kcs4: kcs@94 {
compatible = "aspeed,ast2500-kcs-bmc-v2";
reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
kcs_chan = <4>;
status = "disabled";
};
......
arch/arm/boot/dts/bcm-nsp.dtsi
View file @ 79b7bc0a
......@@ -200,7 +200,7 @@ uart1: serial@400 {
status = "disabled";
};
dma@20000 {
dma: dma@20000 {
compatible = "arm,pl330", "arm,primecell";
reg = <0x20000 0x1000>;
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
......@@ -215,6 +215,8 @@ dma@20000 {
clocks = <&iprocslow>;
clock-names = "apb_pclk";
#dma-cells = <1>;
dma-coherent;
status = "disabled";
};
sdio: sdhci@21000 {
......@@ -257,10 +259,10 @@ amac2: ethernet@24000 {
status = "disabled";
};
mailbox: mailbox@25000 {
mailbox: mailbox@25c00 {
compatible = "brcm,iproc-fa2-mbox";
reg = <0x25000 0x445>;
interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
reg = <0x25c00 0x400>;
interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
#mbox-cells = <1>;
brcm,rx-status-len = <32>;
brcm,use-bcm-hdr;
......
arch/arm/boot/dts/bcm2835-common.dtsi
View file @ 79b7bc0a
......@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
compatible = "brcm,bcm2835-v3d";
reg = <0x7ec00000 0x1000>;
interrupts = <1 10>;
power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
};
vc4: gpu {
......
arch/arm/boot/dts/bcm2835-rpi-common.dtsi 0 → 100644
View file @ 79b7bc0a
// SPDX-License-Identifier: GPL-2.0
/*
* This include file covers the common peripherals and configuration between
* bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
* firmware interface.
*/
#include <dt-bindings/power/raspberrypi-power.h>
&v3d {
power-domains = <&power RPI_POWER_DOMAIN_V3D>;
};
arch/arm/boot/dts/bcm2835.dtsi
View file @ 79b7bc0a
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2835";
......
arch/arm/boot/dts/bcm2836.dtsi
View file @ 79b7bc0a
// SPDX-License-Identifier: GPL-2.0
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2836";
......
arch/arm/boot/dts/bcm2837.dtsi
View file @ 79b7bc0a
#include "bcm283x.dtsi"
#include "bcm2835-common.dtsi"
#include "bcm2835-rpi-common.dtsi"
/ {
compatible = "brcm,bcm2837";
......
arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts
View file @ 79b7bc0a
......@@ -17,6 +17,7 @@ chosen {
};
memory {
device_type = "memory";
reg = <0x00000000 0x08000000
0x88000000 0x18000000>;
};
......
arch/arm/boot/dts/bcm958522er.dts
View file @ 79b7bc0a
......@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958525er.dts
View file @ 79b7bc0a
......@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958525xmc.dts
View file @ 79b7bc0a
......@@ -58,6 +58,10 @@ gpio-restart {
/* XHCI support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958622hr.dts
View file @ 79b7bc0a
......@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958623hr.dts
View file @ 79b7bc0a
......@@ -58,6 +58,10 @@ gpio-restart {
/* USB 3 and SLIC support needed to be complete */
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958625hr.dts
View file @ 79b7bc0a
......@@ -69,6 +69,10 @@ &i2c0 {
status = "okay";
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/bcm958625k.dts
View file @ 79b7bc0a
......@@ -48,6 +48,10 @@ memory@60000000 {
};
};
&dma {
status = "okay";
};
&amac0 {
status = "okay";
};
......
arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi
View file @ 79b7bc0a
......@@ -232,13 +232,6 @@ &usdhc2 {
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
......@@ -409,10 +402,4 @@ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
>;
};
pinctrl_wdog: wdoggrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
>;
};
};
arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi
View file @ 79b7bc0a
......@@ -57,6 +57,13 @@ &qspi {
status = "okay";
};
&wdog1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_wdog>;
fsl,ext-reset-output;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_reset_out>;
......@@ -106,4 +113,10 @@ pinctrl_reset_out: rstoutgrp {