Merge tag 'v5.7.7' into stable/5.7.7

Linux 5.7.7

Makefile

 # SPDX-License-Identifier: GPL-2.0
 VERSION = 5
 PATCHLEVEL = 7
-SUBLEVEL = 5
+SUBLEVEL = 7
 EXTRAVERSION =
 NAME = Kleptomaniac Octopus
 

arch/arm/boot/dts/am335x-pocketbeagle.dts

@@ -88,7 +88,6 @@ AM33XX_PADCONF(AM335X_PIN_MMC0_DAT2, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_DAT3, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CMD, PIN_INPUT_PULLUP, MUX_MODE0)
 			AM33XX_PADCONF(AM335X_PIN_MMC0_CLK, PIN_INPUT_PULLUP, MUX_MODE0)
-			AM33XX_PADCONF(AM335X_PIN_MCASP0_ACLKR, PIN_INPUT, MUX_MODE4)		/* (B12) mcasp0_aclkr.mmc0_sdwp */
 		>;
 	};
 

arch/arm/boot/dts/am33xx.dtsi

@@ -335,7 +335,7 @@ usb: target-module@47400000 {
 			      <0x47400010 0x4>;
 			reg-names = "rev", "sysc";
 			ti,sysc-mask = <(SYSC_OMAP4_FREEEMU |
-					 SYSC_OMAP2_SOFTRESET)>;
+					 SYSC_OMAP4_SOFTRESET)>;
 			ti,sysc-midle = <SYSC_IDLE_FORCE>,
 					<SYSC_IDLE_NO>,
 					<SYSC_IDLE_SMART>;
@@ -347,7 +347,7 @@ usb: target-module@47400000 {
 			clock-names = "fck";
 			#address-cells = <1>;
 			#size-cells = <1>;
-			ranges = <0x0 0x47400000 0x5000>;
+			ranges = <0x0 0x47400000 0x8000>;
 
 			usb0_phy: usb-phy@1300 {
 				compatible = "ti,am335x-usb-phy";

arch/arm/boot/dts/aspeed-bmc-facebook-tiogapass.dts

@@ -112,13 +112,13 @@ &uart5 {
 &kcs2 {
 	// BMC KCS channel 2
 	status = "okay";
-	kcs_addr = <0xca8>;
+	aspeed,lpc-io-reg = <0xca8>;
 };
 
 &kcs3 {
 	// BMC KCS channel 3
 	status = "okay";
-	kcs_addr = <0xca2>;
+	aspeed,lpc-io-reg = <0xca2>;
 };
 
 &mac0 {

arch/arm/boot/dts/aspeed-g5.dtsi

@@ -426,22 +426,22 @@ lpc_bmc: lpc-bmc@0 {
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <8>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <8>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -455,10 +455,10 @@ lpc_host: lpc-host@80 {
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2500-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <8>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 

arch/arm/boot/dts/aspeed-g6.dtsi

@@ -65,6 +65,7 @@ timer {
 			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 		clocks = <&syscon ASPEED_CLK_HPLL>;
 		arm,cpu-registers-not-fw-configured;
+		always-on;
 	};
 
 	ahb {
@@ -368,6 +369,7 @@ timer: timer@1e782000 {
 						<&gic  GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&syscon ASPEED_CLK_APB1>;
 				clock-names = "PCLK";
+				status = "disabled";
                         };
 
 			uart1: serial@1e783000 {
@@ -433,22 +435,23 @@ lpc_bmc: lpc-bmc@0 {
 					#size-cells = <1>;
 					ranges = <0x0 0x0 0x80>;
 
-					kcs1: kcs1@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs1: kcs@24 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x24 0x1>, <0x30 0x1>, <0x3c 0x1>;
 						interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
 						kcs_chan = <1>;
 						status = "disabled";
 					};
-					kcs2: kcs2@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs2: kcs@28 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x28 0x1>, <0x34 0x1>, <0x40 0x1>;
 						interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <2>;
 						status = "disabled";
 					};
-					kcs3: kcs3@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs3: kcs@2c {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x2c 0x1>, <0x38 0x1>, <0x44 0x1>;
 						interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <3>;
 						status = "disabled";
 					};
 				};
@@ -462,10 +465,10 @@ lpc_host: lpc-host@80 {
 					#size-cells = <1>;
 					ranges = <0x0 0x80 0x1e0>;
 
-					kcs4: kcs4@0 {
-						compatible = "aspeed,ast2600-kcs-bmc";
+					kcs4: kcs@94 {
+						compatible = "aspeed,ast2500-kcs-bmc-v2";
+						reg = <0x94 0x1>, <0x98 0x1>, <0x9c 0x1>;
 						interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
-						kcs_chan = <4>;
 						status = "disabled";
 					};
 

arch/arm/boot/dts/bcm-nsp.dtsi

@@ -200,7 +200,7 @@ uart1: serial@400 {
 			status = "disabled";
 		};
 
-		dma@20000 {
+		dma: dma@20000 {
 			compatible = "arm,pl330", "arm,primecell";
 			reg = <0x20000 0x1000>;
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
@@ -215,6 +215,8 @@ dma@20000 {
 			clocks = <&iprocslow>;
 			clock-names = "apb_pclk";
 			#dma-cells = <1>;
+			dma-coherent;
+			status = "disabled";
 		};
 
 		sdio: sdhci@21000 {
@@ -257,10 +259,10 @@ amac2: ethernet@24000 {
 			status = "disabled";
 		};
 
-		mailbox: mailbox@25000 {
+		mailbox: mailbox@25c00 {
 			compatible = "brcm,iproc-fa2-mbox";
-			reg = <0x25000 0x445>;
-			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+			reg = <0x25c00 0x400>;
+			interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>;
 			#mbox-cells = <1>;
 			brcm,rx-status-len = <32>;
 			brcm,use-bcm-hdr;

arch/arm/boot/dts/bcm2835-common.dtsi

@@ -130,7 +130,6 @@ v3d: v3d@7ec00000 {
 			compatible = "brcm,bcm2835-v3d";
 			reg = <0x7ec00000 0x1000>;
 			interrupts = <1 10>;
-			power-domains = <&pm BCM2835_POWER_DOMAIN_GRAFX_V3D>;
 		};
 
 		vc4: gpu {

arch/arm/boot/dts/bcm2835-rpi-common.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * This include file covers the common peripherals and configuration between
+ * bcm2835, bcm2836 and bcm2837 implementations that interact with RPi's
+ * firmware interface.
+ */
+
+#include <dt-bindings/power/raspberrypi-power.h>
+
+&v3d {
+	power-domains = <&power RPI_POWER_DOMAIN_V3D>;
+};

arch/arm/boot/dts/bcm2835.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2835";

arch/arm/boot/dts/bcm2836.dtsi

 // SPDX-License-Identifier: GPL-2.0
 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2836";

arch/arm/boot/dts/bcm2837.dtsi

 #include "bcm283x.dtsi"
 #include "bcm2835-common.dtsi"
+#include "bcm2835-rpi-common.dtsi"
 
 / {
 	compatible = "brcm,bcm2837";

arch/arm/boot/dts/bcm47094-luxul-xwc-2000.dts

@@ -17,6 +17,7 @@ chosen {
 	};
 
 	memory {
+		device_type = "memory";
 		reg = <0x00000000 0x08000000
 		       0x88000000 0x18000000>;
 	};

arch/arm/boot/dts/bcm958522er.dts

@@ -58,6 +58,10 @@ gpio-restart {
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525er.dts

@@ -58,6 +58,10 @@ gpio-restart {
 
 /* USB 3 support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958525xmc.dts

@@ -58,6 +58,10 @@ gpio-restart {
 
 /* XHCI support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958622hr.dts

@@ -58,6 +58,10 @@ gpio-restart {
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958623hr.dts

@@ -58,6 +58,10 @@ gpio-restart {
 
 /* USB 3 and SLIC support needed to be complete */
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625hr.dts

@@ -69,6 +69,10 @@ &i2c0 {
 	status = "okay";
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/bcm958625k.dts

@@ -48,6 +48,10 @@ memory@60000000 {
 	};
 };
 
+&dma {
+	status = "okay";
+};
+
 &amac0 {
 	status = "okay";
 };

arch/arm/boot/dts/imx6ul-kontron-n6x1x-s.dtsi

@@ -232,13 +232,6 @@ &usdhc2 {
 	status = "okay";
 };
 
-&wdog1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_wdog>;
-	fsl,ext-reset-output;
-	status = "okay";
-};
-
 &iomuxc {
 	pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
 
@@ -409,10 +402,4 @@ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
 			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
 		>;
 	};
-
-	pinctrl_wdog: wdoggrp {
-		fsl,pins = <
-			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY	0x30b0
-		>;
-	};
 };

arch/arm/boot/dts/imx6ul-kontron-n6x1x-som-common.dtsi

@@ -57,6 +57,13 @@ &qspi {
 	status = "okay";
 };
 
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_reset_out>;
@@ -106,4 +113,10 @@ pinctrl_reset_out: rstoutgrp {
 			MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09      0x1b0b0
 		>;
 	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY    0x18b0
+		>;
+	};
 };

arch/arm/boot/dts/omap4-duovero-parlor.dts

@@ -139,7 +139,7 @@ &gpmc {
 	ethernet@gpmc {
 		reg = <5 0 0xff>;
 		interrupt-parent = <&gpio2>;
-		interrupts = <12 IRQ_TYPE_EDGE_FALLING>;	/* gpio_44 */
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;		/* gpio_44 */
 
 		phy-mode = "mii";
 

arch/arm/boot/dts/r8a7743.dtsi

@@ -338,7 +338,7 @@ thermal: thermal@e61f0000 {
 			#thermal-sensor-cells = <0>;
 		};
 
-		ipmmu_sy0: mmu@e6280000 {
+		ipmmu_sy0: iommu@e6280000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6280000 0 0x1000>;
@@ -348,7 +348,7 @@ ipmmu_sy0: mmu@e6280000 {
 			status = "disabled";
 		};
 
-		ipmmu_sy1: mmu@e6290000 {
+		ipmmu_sy1: iommu@e6290000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6290000 0 0x1000>;
@@ -357,7 +357,7 @@ ipmmu_sy1: mmu@e6290000 {
 			status = "disabled";
 		};
 
-		ipmmu_ds: mmu@e6740000 {
+		ipmmu_ds: iommu@e6740000 {
 			compatible = "renesas,ipmmu-r8a7743",
 				     "renesas,ipmmu-vmsa";
 			reg = <0 0xe6740000 0 0x1000>;
@@ -367,7 +367,7 @@ ipmmu_ds: mmu@e6740000 {
 			status = "disabled";
 		};