1. 30 Jun, 2020 1 commit
  2. 17 Dec, 2019 1 commit
  3. 23 Jun, 2019 1 commit
  4. 05 Nov, 2018 1 commit
  5. 13 Sep, 2018 1 commit
    • Florian Fainelli's avatar
      ARM: dts: NSP: Enable SFP on bcm958625hr · 046ead61
      Florian Fainelli authored
      Enable the SFP connected to port 5 of the switch and wire up all GPIOs
      to the SFP cage. Because of a hardware limitation of the i2c controller
      on the iProc SoCs which prevents large i2c (> 63 bytes) transactions to
      work, we use the i2c-gpio interface instead, which does not have that
      limitation. This allows us to read the SFP module EEPROM, which would
      not be possible otherwise since it exceeds that size during a single
      read transfer.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      Reviewed-by: default avatarRay Jui <ray.jui@broadcom.com>
      046ead61
  6. 12 Mar, 2018 1 commit
    • Florian Fainelli's avatar
      ARM: dts: NSP: Switch to port 8 for CPU port · 3746fd75
      Florian Fainelli authored
      Now that we have added support for pre-pended Broadcom tags with commit
      11606039 ("net: dsa: b53: Support prepended Broadcom tags") we can
      switch all the Northstar Plus reference boards to use port 8 for the CPU
      port. This allows us to prepare room for supporting the Flow Accelerator
      2 NAPT offload, and frees up port 5 to be made fully configurable for
      the modes that it supports: internal, SGMII, RGMII etc.
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      3746fd75
  7. 28 Feb, 2018 1 commit
    • Florian Fainelli's avatar
      ARM: dts: NSP: Fix amount of RAM on BCM958625HR · 0a5aff64
      Florian Fainelli authored
      Jon attempted to fix the amount of RAM on the BCM958625HR in commit
      c53beb47 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board")
      but it seems like we tripped over some poorly documented schematics.
      
      The top-level page of the schematics says the board has 2GB, but when
      you end-up scrolling to page 6, you see two chips of 4GBit (512MB) but
      what the bootloader really initializes only 512MB, any attempt to use
      more than that results in data aborts. Fix this again back to 512MB.
      
      Fixes: c53beb47 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board")
      Acked-by: default avatarJon Mason <jon.mason@broadcom.com>
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      0a5aff64
  8. 27 Nov, 2017 1 commit
  9. 07 Aug, 2017 1 commit
  10. 18 Mar, 2017 1 commit
  11. 16 Mar, 2017 1 commit
    • Jon Mason's avatar
      ARM: dts: NSP: GPIO reboot open-source · acfa28b3
      Jon Mason authored
      The libgpio code pre-sets the GPIO values for the gpio-reset in the
      device tree.  This results in the device being reset during bringup.
      To prevent this pre-setting, use the "open-source" flag in the device
      tree.
      Signed-off-by: default avatarJon Mason <jon.mason@broadcom.com>
      Fixes: b1aaf88b ("ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file")
      Fixes: 10baed1c ("ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file")
      Fixes: 088e3148 ("ARM: dts: NSP: Add new DT file for bcm958522er")
      Fixes: e3227c12 ("ARM: dts: NSP: Add new DT file for bcm958525er")
      Fixes: 2f8bc002 ("ARM: dts: NSP: Add new DT file for bcm958622hr")
      Fixes: d454c376 ("ARM: dts: NSP: Add new DT file for bcm958623hr")
      Fixes: f27eacf2 ("ARM: dts: NSP: Add new DT file for bcm988312hr")
      Signed-off-by: default avatarFlorian Fainelli <f.fainelli@gmail.com>
      acfa28b3
  12. 19 Jan, 2017 3 commits
  13. 09 Aug, 2016 2 commits
  14. 08 Aug, 2016 2 commits
  15. 07 Jul, 2016 1 commit
  16. 31 May, 2016 1 commit
  17. 07 Dec, 2015 1 commit
  18. 16 Nov, 2015 2 commits
  19. 14 Sep, 2015 1 commit
  20. 02 Mar, 2015 1 commit
  21. 12 Nov, 2014 1 commit
  22. 25 Aug, 2014 2 commits