Commit 3d3f2b18 authored by Angus Ainslie's avatar Angus Ainslie
Browse files

arm64: dts: imx8mq-librem5: add the cd to usdhc2



The card detect needs to be explicitly specified in the devicetree.

Signed-off-by: default avatarAngus Ainslie <angus@akkea.ca>
parent c4b07138
Pipeline #56192 passed with stage
in 46 minutes and 46 seconds
......@@ -889,7 +889,7 @@
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x80
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x83
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xc3
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xc3
......@@ -902,7 +902,7 @@
pinctrl_usdhc2_100mhz: usdhc2grp100mhz {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x80
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x8d
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcd
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcd
......@@ -915,7 +915,7 @@
pinctrl_usdhc2_200mhz: usdhc2grp200mhz {
fsl,pins = <
MX8MQ_IOMUXC_SD2_CD_B_USDHC2_CD_B 0x80
MX8MQ_IOMUXC_SD2_CD_B_GPIO2_IO12 0x80
MX8MQ_IOMUXC_SD2_CLK_USDHC2_CLK 0x9f
MX8MQ_IOMUXC_SD2_CMD_USDHC2_CMD 0xcf
MX8MQ_IOMUXC_SD2_DATA0_USDHC2_DATA0 0xcf
......@@ -1658,7 +1658,7 @@
#else
vmmc-supply = <&reg_wifi_pwr_en>;
#endif
broken-cd;
cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
disable-wp;
cap-sdio-irq;
keep-power-in-suspend;
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment