Commit 41904360 authored by Suravee Suthikulpanit's avatar Suravee Suthikulpanit Committed by Arnd Bergmann
Browse files

arm64: amd-seattle: Adding device tree for AMD Seattle platform



Initial revision of device tree for AMD Seattle Development platform.

Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: default avatarSuravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
Signed-off-by: default avatarThomas Lendacky <Thomas.Lendacky@amd.com>
Signed-off-by: default avatarJoel Schopp <Joel.Schopp@amd.com>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 71f867ec
......@@ -142,6 +142,11 @@ source "kernel/Kconfig.freezer"
menu "Platform selection"
config ARCH_SEATTLE
bool "AMD Seattle SoC Family"
help
This enables support for AMD Seattle SOC Family
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
......
dts-dirs += amd
dts-dirs += apm
dts-dirs += arm
dts-dirs += cavium
......
dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
always := $(dtb-y)
subdir-y := $(dts-dirs)
clean-files := *.dtb
/*
* DTS file for AMD Seattle Overdrive Development Board
*
* Copyright (C) 2014 Advanced Micro Devices, Inc.
*/
/dts-v1/;
/include/ "amd-seattle-soc.dtsi"
/ {
model = "AMD Seattle Development Board (Overdrive)";
compatible = "amd,seattle-overdrive", "amd,seattle";
chosen {
stdout-path = &serial0;
linux,pci-probe-only;
};
};
&ccp0 {
status = "ok";
};
&gpio0 {
status = "ok";
};
&gpio1 {
status = "ok";
};
&i2c0 {
status = "ok";
};
&pcie0 {
status = "ok";
};
&spi0 {
status = "ok";
};
&spi1 {
status = "ok";
sdcard0: sdcard@0 {
compatible = "mmc-spi-slot";
reg = <0>;
spi-max-frequency = <20000000>;
voltage-ranges = <3200 3400>;
gpios = <&gpio0 7 0>;
interrupt-parent = <&gpio0>;
interrupts = <7 3>;
pl022,hierarchy = <0>;
pl022,interface = <0>;
pl022,com-mode = <0x0>;
pl022,rx-level-trig = <0>;
pl022,tx-level-trig = <0>;
};
};
&v2m0 {
arm,msi-base-spi = <64>;
arm,msi-num-spis = <256>;
};
/*
* DTS file for AMD Seattle Clocks
*
* Copyright (C) 2014 Advanced Micro Devices, Inc.
*/
adl3clk_100mhz: clk100mhz_0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "adl3clk_100mhz";
};
ccpclk_375mhz: clk375mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <375000000>;
clock-output-names = "ccpclk_375mhz";
};
sataclk_333mhz: clk333mhz {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <333000000>;
clock-output-names = "sataclk_333mhz";
};
pcieclk_500mhz: clk500mhz_0 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
clock-output-names = "pcieclk_500mhz";
};
dmaclk_500mhz: clk500mhz_1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <500000000>;
clock-output-names = "dmaclk_500mhz";
};
miscclk_250mhz: clk250mhz_4 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <250000000>;
clock-output-names = "miscclk_250mhz";
};
uartspiclk_100mhz: clk100mhz_1 {
compatible = "fixed-clock";
#clock-cells = <0>;
clock-frequency = <100000000>;
clock-output-names = "uartspiclk_100mhz";
};
/*
* DTS file for AMD Seattle SoC
*
* Copyright (C) 2014 Advanced Micro Devices, Inc.
*/
/ {
compatible = "amd,seattle";
interrupt-parent = <&gic0>;
#address-cells = <2>;
#size-cells = <2>;
gic0: interrupt-controller@e1101000 {
compatible = "arm,gic-400", "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0xe1110000 0 0x1000>,
<0x0 0xe112f000 0 0x2000>,
<0x0 0xe1140000 0 0x10000>,
<0x0 0xe1160000 0 0x10000>;
interrupts = <1 9 0xf04>;
ranges = <0 0 0 0xe1100000 0 0x100000>;
v2m0: v2m@e0080000 {
compatible = "arm,gic-v2m-frame";
msi-controller;
reg = <0x0 0x00080000 0 0x1000>;
};
};
timer {
compatible = "arm,armv8-timer";
interrupts = <1 13 0xff04>,
<1 14 0xff04>,
<1 11 0xff04>,
<1 10 0xff04>;
};
pmu {
compatible = "arm,armv8-pmuv3";
interrupts = <0 7 4>,
<0 8 4>,
<0 9 4>,
<0 10 4>,
<0 11 4>,
<0 12 4>,
<0 13 4>,
<0 14 4>;
};
smb0: smb {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
ranges;
/* DDR range is 40-bit addressing */
dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
/include/ "amd-seattle-clks.dtsi"
sata0: sata@e0300000 {
compatible = "snps,dwc-ahci";
reg = <0 0xe0300000 0 0x800>;
interrupts = <0 355 4>;
clocks = <&sataclk_333mhz>;
dma-coherent;
};
i2c0: i2c@e1000000 {
status = "disabled";
compatible = "snps,designware-i2c";
reg = <0 0xe1000000 0 0x1000>;
interrupts = <0 357 4>;
clocks = <&uartspiclk_100mhz>;
};
serial0: serial@e1010000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0 0xe1010000 0 0x1000>;
interrupts = <0 328 4>;
clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
clock-names = "uartclk", "apb_pclk";
};
spi0: ssp@e1020000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1020000 0 0x1000>;
spi-controller;
interrupts = <0 330 4>;
clocks = <&uartspiclk_100mhz>;
clock-names = "apb_pclk";
};
spi1: ssp@e1030000 {
status = "disabled";
compatible = "arm,pl022", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1030000 0 0x1000>;
spi-controller;
interrupts = <0 329 4>;
clocks = <&uartspiclk_100mhz>;
clock-names = "apb_pclk";
num-cs = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
gpio0: gpio@e1040000 {
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1040000 0 0x1000>;
gpio-controller;
interrupts = <0 359 4>;
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&uartspiclk_100mhz>;
clock-names = "apb_pclk";
};
gpio1: gpio@e1050000 {
status = "disabled";
compatible = "arm,pl061", "arm,primecell";
#gpio-cells = <2>;
reg = <0 0xe1050000 0 0x1000>;
gpio-controller;
interrupts = <0 358 4>;
clocks = <&uartspiclk_100mhz>;
clock-names = "apb_pclk";
};
ccp0: ccp@e0100000 {
status = "disabled";
compatible = "amd,ccp-seattle-v1a";
reg = <0 0xe0100000 0 0x10000>;
interrupts = <0 3 4>;
dma-coherent;
};
pcie0: pcie@f0000000 {
compatible = "pci-host-ecam-generic";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
device_type = "pci";
bus-range = <0 0xff>;
msi-parent = <&v2m0>;
reg = <0 0xf0000000 0 0x10000000>;
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
interrupt-map =
<0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
<0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
<0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
<0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
dma-coherent;
dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
ranges =
/* I/O Memory (size=64K) */
<0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
/* 32-bit MMIO (size=2G) */
<0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
/* 64-bit MMIO (size= 124G) */
<0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
};
};
};
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment