Commit 50170656 authored by David S. Miller's avatar David S. Miller
Browse files

Merge branch 'master' of /home/davem/src/GIT/linux-2.6/

Conflicts:
	include/net/tcp.h
parents e93737b0 2fe77b81

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.
What: /sys/bus/pci/drivers/qla2xxx/.../devices/*
Date: September 2009
Contact: QLogic Linux Driver <linux-driver@qlogic.com>
Description: qla2xxx-udev.sh currently looks for uevent CHANGE events to
signal a firmware-dump has been generated by the driver and is
ready for retrieval.
Users: qla2xxx-udev.sh. Proposed changes should be mailed to
linux-driver@qlogic.com
......@@ -8,7 +8,7 @@ Description:
1 - major number
2 - minor mumber
3 - device name
4 - reads completed succesfully
4 - reads completed successfully
5 - reads merged
6 - sectors read
7 - time spent reading (ms)
......
......@@ -4,7 +4,7 @@ Contact: Jerome Marchand <jmarchan@redhat.com>
Description:
The /sys/block/<disk>/stat files displays the I/O
statistics of disk <disk>. They contain 11 fields:
1 - reads completed succesfully
1 - reads completed successfully
2 - reads merged
3 - sectors read
4 - time spent reading (ms)
......
......@@ -144,3 +144,16 @@ Description:
Write a 1 to force the device to disconnect
(equivalent to unplugging a wired USB device).
What: /sys/bus/usb/drivers/.../remove_id
Date: November 2009
Contact: CHENG Renquan <rqcheng@smu.edu.sg>
Description:
Writing a device ID to this file will remove an ID
that was dynamically added via the new_id sysfs entry.
The format for the device ID is:
idVendor idProduct. After successfully
removing an ID, the driver will no longer support the
device. This is useful to ensure auto probing won't
match the driver to the device. For example:
# echo "046d c315" > /sys/bus/usb/drivers/foo/remove_id
......@@ -23,3 +23,16 @@ Description:
Since this relates to security (specifically, the
lifetime of PTKs and GTKs) it should not be changed
from the default.
What: /sys/class/uwb_rc/uwbN/wusbhc/wusb_phy_rate
Date: August 2009
KernelVersion: 2.6.32
Contact: David Vrabel <david.vrabel@csr.com>
Description:
The maximum PHY rate to use for all connected devices.
This is only of limited use for testing and
development as the hardware's automatic rate
adaptation is better then this simple control.
Refer to [ECMA-368] section 10.3.1.1 for the value to
use.
......@@ -136,6 +136,24 @@ Description: Discover cpuidle policy and mechanism
See files in Documentation/cpuidle/ for more information.
What: /sys/devices/system/cpu/cpu#/cpufreq/*
Date: pre-git history
Contact: cpufreq@vger.kernel.org
Description: Discover and change clock speed of CPUs
Clock scaling allows you to change the clock speed of the
CPUs on the fly. This is a nice method to save battery
power, because the lower the clock speed, the less power
the CPU consumes.
There are many knobs to tweak in this directory.
See files in Documentation/cpu-freq/ for more information.
In particular, read Documentation/cpu-freq/user-guide.txt
to learn how to control the knobs.
What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
Date: August 2008
KernelVersion: 2.6.27
......
......@@ -214,7 +214,7 @@ most specific mask.
Here is pseudo-code showing how this might be done:
#define PLAYBACK_ADDRESS_BITS DMA_BIT_MASK(32)
#define RECORD_ADDRESS_BITS 0x00ffffff
#define RECORD_ADDRESS_BITS DMA_BIT_MASK(24)
struct my_sound_card *card;
struct pci_dev *pdev;
......@@ -224,14 +224,14 @@ Here is pseudo-code showing how this might be done:
card->playback_enabled = 1;
} else {
card->playback_enabled = 0;
printk(KERN_WARN "%s: Playback disabled due to DMA limitations.\n",
printk(KERN_WARNING "%s: Playback disabled due to DMA limitations.\n",
card->name);
}
if (!pci_set_dma_mask(pdev, RECORD_ADDRESS_BITS)) {
card->record_enabled = 1;
} else {
card->record_enabled = 0;
printk(KERN_WARN "%s: Record disabled due to DMA limitations.\n",
printk(KERN_WARNING "%s: Record disabled due to DMA limitations.\n",
card->name);
}
......
......@@ -293,10 +293,23 @@ X!Idrivers/video/console/fonts.c
<chapter id="input_subsystem">
<title>Input Subsystem</title>
<sect1><title>Input core</title>
!Iinclude/linux/input.h
!Edrivers/input/input.c
!Edrivers/input/ff-core.c
!Edrivers/input/ff-memless.c
</sect1>
<sect1><title>Polled input devices</title>
!Iinclude/linux/input-polldev.h
!Edrivers/input/input-polldev.c
</sect1>
<sect1><title>Matrix keyboars/keypads</title>
!Iinclude/linux/input/matrix_keypad.h
</sect1>
<sect1><title>Sparse keymap support</title>
!Iinclude/linux/input/sparse-keymap.h
!Edrivers/input/sparse-keymap.c
</sect1>
</chapter>
<chapter id="spi">
......
......@@ -29,6 +29,14 @@
<revhistory>
<!-- Put document revisions here, newest first. -->
<revision>
<revnumber>2.0.2</revnumber>
<date>2009-10-25</date>
<authorinitials>mcc</authorinitials>
<revremark>
documents FE_SET_FRONTEND_TUNE_MODE and FE_DISHETWORK_SEND_LEGACY_CMD ioctls.
</revremark>
</revision>
<revision>
<revnumber>2.0.1</revnumber>
<date>2009-09-16</date>
......@@ -85,3 +93,8 @@ Added ISDB-T test originally written by Patrick Boettcher
&sub-examples;
</chapter>
<!-- END OF CHAPTERS -->
<appendix id="frontend_h">
<title>DVB Frontend Header File</title>
&sub-frontend-h;
</appendix>
<section id="FE_GET_PROPERTY">
<title>FE_GET_PROPERTY/FE_SET_PROPERTY</title>
<section id="isdbt">
<title>ISDB-T frontend</title>
<para>This section describes shortly what are the possible parameters in the Linux
......@@ -312,3 +315,4 @@
</section>
</section>
</section>
</section>
<programlisting>
/*
* frontend.h
*
* Copyright (C) 2000 Marcus Metzler &lt;marcus@convergence.de&gt;
* Ralph Metzler &lt;ralph@convergence.de&gt;
* Holger Waechtler &lt;holger@convergence.de&gt;
* Andre Draszik &lt;ad@convergence.de&gt;
* for convergence integrated media GmbH
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public License
* as published by the Free Software Foundation; either version 2.1
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
*/
#ifndef _DVBFRONTEND_H_
#define _DVBFRONTEND_H_
#include &lt;linux/types.h&gt;
typedef enum fe_type {
FE_QPSK,
FE_QAM,
FE_OFDM,
FE_ATSC
} fe_type_t;
typedef enum fe_caps {
FE_IS_STUPID = 0,
FE_CAN_INVERSION_AUTO = 0x1,
FE_CAN_FEC_1_2 = 0x2,
FE_CAN_FEC_2_3 = 0x4,
FE_CAN_FEC_3_4 = 0x8,
FE_CAN_FEC_4_5 = 0x10,
FE_CAN_FEC_5_6 = 0x20,
FE_CAN_FEC_6_7 = 0x40,
FE_CAN_FEC_7_8 = 0x80,
FE_CAN_FEC_8_9 = 0x100,
FE_CAN_FEC_AUTO = 0x200,
FE_CAN_QPSK = 0x400,
FE_CAN_QAM_16 = 0x800,
FE_CAN_QAM_32 = 0x1000,
FE_CAN_QAM_64 = 0x2000,
FE_CAN_QAM_128 = 0x4000,
FE_CAN_QAM_256 = 0x8000,
FE_CAN_QAM_AUTO = 0x10000,
FE_CAN_TRANSMISSION_MODE_AUTO = 0x20000,
FE_CAN_BANDWIDTH_AUTO = 0x40000,
FE_CAN_GUARD_INTERVAL_AUTO = 0x80000,
FE_CAN_HIERARCHY_AUTO = 0x100000,
FE_CAN_8VSB = 0x200000,
FE_CAN_16VSB = 0x400000,
FE_HAS_EXTENDED_CAPS = 0x800000, /* We need more bitspace for newer APIs, indicate this. */
FE_CAN_2G_MODULATION = 0x10000000, /* frontend supports "2nd generation modulation" (DVB-S2) */
FE_NEEDS_BENDING = 0x20000000, /* not supported anymore, don't use (frontend requires frequency bending) */
FE_CAN_RECOVER = 0x40000000, /* frontend can recover from a cable unplug automatically */
FE_CAN_MUTE_TS = 0x80000000 /* frontend can stop spurious TS data output */
} fe_caps_t;
struct dvb_frontend_info {
char name[128];
fe_type_t type;
__u32 frequency_min;
__u32 frequency_max;
__u32 frequency_stepsize;
__u32 frequency_tolerance;
__u32 symbol_rate_min;
__u32 symbol_rate_max;
__u32 symbol_rate_tolerance; /* ppm */
__u32 notifier_delay; /* DEPRECATED */
fe_caps_t caps;
};
/**
* Check out the DiSEqC bus spec available on http://www.eutelsat.org/ for
* the meaning of this struct...
*/
struct dvb_diseqc_master_cmd {
__u8 msg [6]; /* { framing, address, command, data [3] } */
__u8 msg_len; /* valid values are 3...6 */
};
struct dvb_diseqc_slave_reply {
__u8 msg [4]; /* { framing, data [3] } */
__u8 msg_len; /* valid values are 0...4, 0 means no msg */
int timeout; /* return from ioctl after timeout ms with */
}; /* errorcode when no message was received */
typedef enum fe_sec_voltage {
SEC_VOLTAGE_13,
SEC_VOLTAGE_18,
SEC_VOLTAGE_OFF
} fe_sec_voltage_t;
typedef enum fe_sec_tone_mode {
SEC_TONE_ON,
SEC_TONE_OFF
} fe_sec_tone_mode_t;
typedef enum fe_sec_mini_cmd {
SEC_MINI_A,
SEC_MINI_B
} fe_sec_mini_cmd_t;
typedef enum fe_status {
FE_HAS_SIGNAL = 0x01, /* found something above the noise level */
FE_HAS_CARRIER = 0x02, /* found a DVB signal */
FE_HAS_VITERBI = 0x04, /* FEC is stable */
FE_HAS_SYNC = 0x08, /* found sync bytes */
FE_HAS_LOCK = 0x10, /* everything's working... */
FE_TIMEDOUT = 0x20, /* no lock within the last ~2 seconds */
FE_REINIT = 0x40 /* frontend was reinitialized, */
} fe_status_t; /* application is recommended to reset */
/* DiSEqC, tone and parameters */
typedef enum fe_spectral_inversion {
INVERSION_OFF,
INVERSION_ON,
INVERSION_AUTO
} fe_spectral_inversion_t;
typedef enum fe_code_rate {
FEC_NONE = 0,
FEC_1_2,
FEC_2_3,
FEC_3_4,
FEC_4_5,
FEC_5_6,
FEC_6_7,
FEC_7_8,
FEC_8_9,
FEC_AUTO,
FEC_3_5,
FEC_9_10,
} fe_code_rate_t;
typedef enum fe_modulation {
QPSK,
QAM_16,
QAM_32,
QAM_64,
QAM_128,
QAM_256,
QAM_AUTO,
VSB_8,
VSB_16,
PSK_8,
APSK_16,
APSK_32,
DQPSK,
} fe_modulation_t;
typedef enum fe_transmit_mode {
TRANSMISSION_MODE_2K,
TRANSMISSION_MODE_8K,
TRANSMISSION_MODE_AUTO,
TRANSMISSION_MODE_4K
} fe_transmit_mode_t;
typedef enum fe_bandwidth {
BANDWIDTH_8_MHZ,
BANDWIDTH_7_MHZ,
BANDWIDTH_6_MHZ,
BANDWIDTH_AUTO
} fe_bandwidth_t;
typedef enum fe_guard_interval {
GUARD_INTERVAL_1_32,
GUARD_INTERVAL_1_16,
GUARD_INTERVAL_1_8,
GUARD_INTERVAL_1_4,
GUARD_INTERVAL_AUTO
} fe_guard_interval_t;
typedef enum fe_hierarchy {
HIERARCHY_NONE,
HIERARCHY_1,
HIERARCHY_2,
HIERARCHY_4,
HIERARCHY_AUTO
} fe_hierarchy_t;
struct dvb_qpsk_parameters {
__u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec_inner; /* forward error correction (see above) */
};
struct dvb_qam_parameters {
__u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec_inner; /* forward error correction (see above) */
fe_modulation_t modulation; /* modulation type (see above) */
};
struct dvb_vsb_parameters {
fe_modulation_t modulation; /* modulation type (see above) */
};
struct dvb_ofdm_parameters {
fe_bandwidth_t bandwidth;
fe_code_rate_t code_rate_HP; /* high priority stream code rate */
fe_code_rate_t code_rate_LP; /* low priority stream code rate */
fe_modulation_t constellation; /* modulation type (see above) */
fe_transmit_mode_t transmission_mode;
fe_guard_interval_t guard_interval;
fe_hierarchy_t hierarchy_information;
};
struct dvb_frontend_parameters {
__u32 frequency; /* (absolute) frequency in Hz for QAM/OFDM/ATSC */
/* intermediate frequency in kHz for QPSK */
fe_spectral_inversion_t inversion;
union {
struct dvb_qpsk_parameters qpsk;
struct dvb_qam_parameters qam;
struct dvb_ofdm_parameters ofdm;
struct dvb_vsb_parameters vsb;
} u;
};
struct dvb_frontend_event {
fe_status_t status;
struct dvb_frontend_parameters parameters;
};
/* S2API Commands */
#define DTV_UNDEFINED 0
#define DTV_TUNE 1
#define DTV_CLEAR 2
#define DTV_FREQUENCY 3
#define DTV_MODULATION 4
#define DTV_BANDWIDTH_HZ 5
#define DTV_INVERSION 6
#define DTV_DISEQC_MASTER 7
#define DTV_SYMBOL_RATE 8
#define DTV_INNER_FEC 9
#define DTV_VOLTAGE 10
#define DTV_TONE 11
#define DTV_PILOT 12
#define DTV_ROLLOFF 13
#define DTV_DISEQC_SLAVE_REPLY 14
/* Basic enumeration set for querying unlimited capabilities */
#define DTV_FE_CAPABILITY_COUNT 15
#define DTV_FE_CAPABILITY 16
#define DTV_DELIVERY_SYSTEM 17
/* ISDB-T and ISDB-Tsb */
#define DTV_ISDBT_PARTIAL_RECEPTION 18
#define DTV_ISDBT_SOUND_BROADCASTING 19
#define DTV_ISDBT_SB_SUBCHANNEL_ID 20
#define DTV_ISDBT_SB_SEGMENT_IDX 21
#define DTV_ISDBT_SB_SEGMENT_COUNT 22
#define DTV_ISDBT_LAYERA_FEC 23
#define DTV_ISDBT_LAYERA_MODULATION 24
#define DTV_ISDBT_LAYERA_SEGMENT_COUNT 25
#define DTV_ISDBT_LAYERA_TIME_INTERLEAVING 26
#define DTV_ISDBT_LAYERB_FEC 27
#define DTV_ISDBT_LAYERB_MODULATION 28
#define DTV_ISDBT_LAYERB_SEGMENT_COUNT 29
#define DTV_ISDBT_LAYERB_TIME_INTERLEAVING 30
#define DTV_ISDBT_LAYERC_FEC 31
#define DTV_ISDBT_LAYERC_MODULATION 32
#define DTV_ISDBT_LAYERC_SEGMENT_COUNT 33
#define DTV_ISDBT_LAYERC_TIME_INTERLEAVING 34
#define DTV_API_VERSION 35
#define DTV_CODE_RATE_HP 36
#define DTV_CODE_RATE_LP 37
#define DTV_GUARD_INTERVAL 38
#define DTV_TRANSMISSION_MODE 39
#define DTV_HIERARCHY 40
#define DTV_ISDBT_LAYER_ENABLED 41
#define DTV_ISDBS_TS_ID 42
#define DTV_MAX_COMMAND DTV_ISDBS_TS_ID
typedef enum fe_pilot {
PILOT_ON,
PILOT_OFF,
PILOT_AUTO,
} fe_pilot_t;
typedef enum fe_rolloff {
ROLLOFF_35, /* Implied value in DVB-S, default for DVB-S2 */
ROLLOFF_20,
ROLLOFF_25,
ROLLOFF_AUTO,
} fe_rolloff_t;
typedef enum fe_delivery_system {
SYS_UNDEFINED,
SYS_DVBC_ANNEX_AC,
SYS_DVBC_ANNEX_B,
SYS_DVBT,
SYS_DSS,
SYS_DVBS,
SYS_DVBS2,
SYS_DVBH,
SYS_ISDBT,
SYS_ISDBS,
SYS_ISDBC,
SYS_ATSC,
SYS_ATSCMH,
SYS_DMBTH,
SYS_CMMB,
SYS_DAB,
} fe_delivery_system_t;
struct dtv_cmds_h {
char *name; /* A display name for debugging purposes */
__u32 cmd; /* A unique ID */
/* Flags */
__u32 set:1; /* Either a set or get property */
__u32 buffer:1; /* Does this property use the buffer? */
__u32 reserved:30; /* Align */
};
struct dtv_property {
__u32 cmd;
__u32 reserved[3];
union {
__u32 data;
struct {
__u8 data[32];
__u32 len;
__u32 reserved1[3];
void *reserved2;
} buffer;
} u;
int result;
} __attribute__ ((packed));
/* num of properties cannot exceed DTV_IOCTL_MAX_MSGS per ioctl */
#define DTV_IOCTL_MAX_MSGS 64
struct dtv_properties {
__u32 num;
struct dtv_property *props;
};
#define <link linkend="FE_GET_PROPERTY">FE_SET_PROPERTY</link> _IOW('o', 82, struct dtv_properties)
#define <link linkend="FE_GET_PROPERTY">FE_GET_PROPERTY</link> _IOR('o', 83, struct dtv_properties)
/**
* When set, this flag will disable any zigzagging or other "normal" tuning
* behaviour. Additionally, there will be no automatic monitoring of the lock
* status, and hence no frontend events will be generated. If a frontend device
* is closed, this flag will be automatically turned off when the device is
* reopened read-write.
*/
#define FE_TUNE_MODE_ONESHOT 0x01
#define <link linkend="FE_GET_INFO">FE_GET_INFO</link> _IOR('o', 61, struct dvb_frontend_info)
#define <link linkend="FE_DISEQC_RESET_OVERLOAD">FE_DISEQC_RESET_OVERLOAD</link> _IO('o', 62)
#define <link linkend="FE_DISEQC_SEND_MASTER_CMD">FE_DISEQC_SEND_MASTER_CMD</link> _IOW('o', 63, struct dvb_diseqc_master_cmd)
#define <link linkend="FE_DISEQC_RECV_SLAVE_REPLY">FE_DISEQC_RECV_SLAVE_REPLY</link> _IOR('o', 64, struct dvb_diseqc_slave_reply)
#define <link linkend="FE_DISEQC_SEND_BURST">FE_DISEQC_SEND_BURST</link> _IO('o', 65) /* fe_sec_mini_cmd_t */
#define <link linkend="FE_SET_TONE">FE_SET_TONE</link> _IO('o', 66) /* fe_sec_tone_mode_t */
#define <link linkend="FE_SET_VOLTAGE">FE_SET_VOLTAGE</link> _IO('o', 67) /* fe_sec_voltage_t */
#define <link linkend="FE_ENABLE_HIGH_LNB_VOLTAGE">FE_ENABLE_HIGH_LNB_VOLTAGE</link> _IO('o', 68) /* int */
#define <link linkend="FE_READ_STATUS">FE_READ_STATUS</link> _IOR('o', 69, fe_status_t)
#define <link linkend="FE_READ_BER">FE_READ_BER</link> _IOR('o', 70, __u32)
#define <link linkend="FE_READ_SIGNAL_STRENGTH">FE_READ_SIGNAL_STRENGTH</link> _IOR('o', 71, __u16)
#define <link linkend="FE_READ_SNR">FE_READ_SNR</link> _IOR('o', 72, __u16)
#define <link linkend="FE_READ_UNCORRECTED_BLOCKS">FE_READ_UNCORRECTED_BLOCKS</link> _IOR('o', 73, __u32)
#define <link linkend="FE_SET_FRONTEND">FE_SET_FRONTEND</link> _IOW('o', 76, struct dvb_frontend_parameters)
#define <link linkend="FE_GET_FRONTEND">FE_GET_FRONTEND</link> _IOR('o', 77, struct dvb_frontend_parameters)
#define <link linkend="FE_SET_FRONTEND_TUNE_MODE">FE_SET_FRONTEND_TUNE_MODE</link> _IO('o', 81) /* unsigned int */
#define <link linkend="FE_GET_EVENT">FE_GET_EVENT</link> _IOR('o', 78, struct dvb_frontend_event)
#define <link linkend="FE_DISHNETWORK_SEND_LEGACY_CMD">FE_DISHNETWORK_SEND_LEGACY_CMD</link> _IO('o', 80) /* unsigned int */
#endif /*_DVBFRONTEND_H_*/
</programlisting>
This diff is collapsed.
......@@ -417,8 +417,8 @@ desc->chip->end();
</para>
<para>
To make use of the split implementation, replace the call to
__do_IRQ by a call to desc->chip->handle_irq() and associate
the appropriate handler function to desc->chip->handle_irq().
__do_IRQ by a call to desc->handle_irq() and associate
the appropriate handler function to desc->handle_irq().
In most cases the generic handler implementations should
be sufficient.
</para>
......