Commit 2c0248d6 authored by Joerg Roedel's avatar Joerg Roedel

Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek',...

Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', 'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next

Too many changes to show.

To preserve performance only 1000 of 1000+ files are displayed.

......@@ -99,6 +99,8 @@ Linas Vepstas <linas@austin.ibm.com>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@web.de>
Linus Lüssing <linus.luessing@c0d3.blue> <linus.luessing@ascom.ch>
Mark Brown <broonie@sirena.org.uk>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@theobroma-systems.com>
Martin Kepplinger <martink@posteo.de> <martin.kepplinger@ginzinger.com>
Matthieu CASTET <castet.matthieu@free.fr>
Mauro Carvalho Chehab <mchehab@kernel.org> <mchehab@brturbo.com.br>
Mauro Carvalho Chehab <mchehab@kernel.org> <maurochehab@gmail.com>
......@@ -171,6 +173,7 @@ Vlad Dogaru <ddvlad@gmail.com> <vlad.dogaru@intel.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@virtuozzo.com>
Vladimir Davydov <vdavydov.dev@gmail.com> <vdavydov@parallels.com>
Takashi YOSHII <takashi.yoshii.zj@renesas.com>
Yakir Yang <kuankuan.y@gmail.com> <ykk@rock-chips.com>
Yusuke Goda <goda.yusuke@renesas.com>
Gustavo Padovan <gustavo@las.ic.unicamp.br>
Gustavo Padovan <padovan@profusion.mobi>
......@@ -1578,6 +1578,15 @@
extended tables themselves, and also PASID support. With
this option set, extended tables will not be used even
on hardware which claims to support them.
tboot_noforce [Default Off]
Do not force the Intel IOMMU enabled under tboot.
By default, tboot will force Intel IOMMU on, which
could harm performance of some high-throughput
devices like 40GBit network cards, even if identity
mapping is enabled.
Note that using this option lowers the security
provided by tboot because it makes the system
vulnerable to DMA attacks.
intel_idle.max_cstate= [KNL,HW,ACPI,X86]
0 disables intel_idle and fall back on acpi_idle.
......@@ -1644,6 +1653,12 @@
nobypass [PPC/POWERNV]
Disable IOMMU bypass, using IOMMU for PCI devices.
iommu.passthrough=
[ARM64] Configure DMA to bypass the IOMMU by default.
Format: { "0" | "1" }
0 - Use IOMMU translation for DMA.
1 - Bypass the IOMMU for DMA.
unset - Use IOMMU translation for DMA.
io7= [HW] IO7 for Marvel based alpha systems
See comment before marvel_specify_io7 in
......@@ -1725,6 +1740,12 @@
kernel and module base offset ASLR (Address Space
Layout Randomization).
kasan_multi_shot
[KNL] Enforce KASAN (Kernel Address Sanitizer) to print
report on every invalid memory access. Without this
parameter KASAN will print report only for the first
invalid access.
keepinitrd [HW,ARM]
kernelcore= [KNL,X86,IA-64,PPC]
......
......@@ -45,7 +45,7 @@ The following clocks are available:
- 1 15 SATA
- 1 16 SATA USB
- 1 17 Main
- 1 18 SD/MMC
- 1 18 SD/MMC/GOP
- 1 21 Slow IO (SPI, NOR, BootROM, I2C, UART)
- 1 22 USB3H0
- 1 23 USB3H1
......@@ -65,7 +65,7 @@ Required properties:
"cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
Example:
......@@ -78,6 +78,6 @@ Example:
gate-clock-output-names = "cpm-audio", "cpm-communit", "cpm-nand", "cpm-ppv2", "cpm-sdio",
"cpm-mg-domain", "cpm-mg-core", "cpm-xor1", "cpm-xor0", "cpm-gop-dp", "none",
"cpm-pcie_x10", "cpm-pcie_x11", "cpm-pcie_x4", "cpm-pcie-xor", "cpm-sata",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc", "none", "none", "cpm-slow-io",
"cpm-sata-usb", "cpm-main", "cpm-sd-mmc-gop", "none", "none", "cpm-slow-io",
"cpm-usb3h0", "cpm-usb3h1", "cpm-usb3dev", "cpm-eip150", "cpm-eip197";
};
......@@ -4,7 +4,6 @@ Required properties:
- compatible: value should be one of the following
"samsung,exynos3250-mipi-dsi" /* for Exynos3250/3472 SoCs */
"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
......
......@@ -11,7 +11,6 @@ Required properties:
"samsung,s5pv210-fimd"; /* for S5PV210 SoC */
"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
......
......@@ -60,6 +60,17 @@ conditions.
aliases of secure registers have to be used during
SMMU configuration.
- stream-match-mask : For SMMUs supporting stream matching and using
#iommu-cells = <1>, specifies a mask of bits to ignore
when matching stream IDs (e.g. this may be programmed
into the SMRn.MASK field of every stream match register
used). For cases where it is desirable to ignore some
portion of every Stream ID (e.g. for certain MMU-500
configurations given globally unique input IDs). This
property is not valid for SMMUs using stream indexing,
or using stream matching with #iommu-cells = <2>, and
may be ignored if present in such cases.
** Deprecated properties:
- mmu-masters (deprecated in favour of the generic "iommus" binding) :
......@@ -109,3 +120,20 @@ conditions.
master3 {
iommus = <&smmu2 1 0x30>;
};
/* ARM MMU-500 with 10-bit stream ID input configuration */
smmu3: iommu {
compatible = "arm,mmu-500", "arm,smmu-v2";
...
#iommu-cells = <1>;
/* always ignore appended 5-bit TBU number */
stream-match-mask = 0x7c00;
};
bus {
/* bus whose child devices emit one unique 10-bit stream
ID each, but may master through multiple SMMU TBUs */
iommu-map = <0 &smmu3 0 0x400>;
...
};
......@@ -13,7 +13,7 @@ Required Properties:
- "rockchip,rk2928-dw-mshc": for Rockchip RK2928 and following,
before RK3288
- "rockchip,rk3288-dw-mshc": for Rockchip RK3288
- "rockchip,rk1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK1108
- "rockchip,rv1108-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RV1108
- "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036
- "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368
- "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399
......
......@@ -44,13 +44,19 @@ Hip05 Example (note that Hip06 is the same except compatible):
};
HiSilicon Hip06/Hip07 PCIe host bridge DT (almost-ECAM) description.
Some BIOSes place the host controller in a mode where it is ECAM
compliant for all devices other than the root complex. In such cases,
the host controller should be described as below.
The properties and their meanings are identical to those described in
host-generic-pci.txt except as listed below.
Properties of the host controller node that differ from
host-generic-pci.txt:
- compatible : Must be "hisilicon,pcie-almost-ecam"
- compatible : Must be "hisilicon,hip06-pcie-ecam", or
"hisilicon,hip07-pcie-ecam"
- reg : Two entries: First the ECAM configuration space for any
other bus underneath the root bus. Second, the base
......@@ -59,7 +65,7 @@ host-generic-pci.txt:
Example:
pcie0: pcie@a0090000 {
compatible = "hisilicon,pcie-almost-ecam";
compatible = "hisilicon,hip06-pcie-ecam";
reg = <0 0xb0000000 0 0x2000000>, /* ECAM configuration space */
<0 0xa0090000 0 0x10000>; /* host bridge registers */
bus-range = <0 31>;
......
Broadcom USB3 phy binding for northstar plus SoC
The USB3 phy is internal to the SoC and is accessed using mdio interface.
Required mdio bus properties:
- reg: Should be 0x0 for SoC internal USB3 phy
- #address-cells: must be 1
- #size-cells: must be 0
Required USB3 PHY properties:
- compatible: should be "brcm,nsp-usb3-phy"
- reg: USB3 Phy address on SoC internal MDIO bus and it should be 0x10.
- usb3-ctrl-syscon: handler of syscon node defining physical address
of usb3 control register.
- #phy-cells: must be 0
Required usb3 control properties:
- compatible: should be "brcm,nsp-usb3-ctrl"
- reg: offset and length of the control registers
Example:
mdio@0 {
reg = <0x0>;
#address-cells = <1>;
#size-cells = <0>;
usb3_phy: usb-phy@10 {
compatible = "brcm,nsp-usb3-phy";
reg = <0x10>;
usb3-ctrl-syscon = <&usb3_ctrl>;
#phy-cells = <0>;
status = "disabled";
};
};
usb3_ctrl: syscon@104408 {
compatible = "brcm,nsp-usb3-ctrl", "syscon";
reg = <0x104408 0x3fc>;
};
......@@ -12,7 +12,8 @@ Required properties:
- reg : Offset and length of the register set for the module
- interrupts : the interrupt number for the RNG module.
Used for "ti,omap4-rng" and "inside-secure,safexcel-eip76"
- clocks: the trng clock source
- clocks: the trng clock source. Only mandatory for the
"inside-secure,safexcel-eip76" compatible.
Example:
/* AM335x */
......
......@@ -20,3 +20,8 @@ Index 1: The output gpio for enabling Vbus output from the device to the otg
Index 2: The output gpio for muxing of the data pins between the USB host and
the USB peripheral controller, write 1 to mux to the peripheral
controller
There is a mapping between indices and GPIO connection IDs as follows
id index 0
vbus index 1
mux index 2
......@@ -58,8 +58,7 @@ prototypes:
int (*permission) (struct inode *, int, unsigned int);
int (*get_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (const struct path *, struct dentry *, struct kstat *,
u32, unsigned int);
int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
ssize_t (*listxattr) (struct dentry *, char *, size_t);
int (*fiemap)(struct inode *, struct fiemap_extent_info *, u64 start, u64 len);
void (*update_time)(struct inode *, struct timespec *, int);
......
......@@ -600,3 +600,9 @@ in your dentry operations instead.
[recommended]
->readlink is optional for symlinks. Don't set, unless filesystem needs
to fake something for readlink(2).
--
[mandatory]
->getattr() is now passed a struct path rather than a vfsmount and
dentry separately, and it now has request_mask and query_flags arguments
to specify the fields and sync type requested by statx. Filesystems not
supporting any statx-specific features may ignore the new arguments.
......@@ -382,8 +382,7 @@ struct inode_operations {
int (*permission) (struct inode *, int);
int (*get_acl)(struct inode *, int);
int (*setattr) (struct dentry *, struct iattr *);
int (*getattr) (const struct path *, struct dentry *, struct kstat *,
u32, unsigned int);
int (*getattr) (const struct path *, struct kstat *, u32, unsigned int);
ssize_t (*listxattr) (struct dentry *, char *, size_t);