Commit 34962fb8 authored by Mauro Carvalho Chehab's avatar Mauro Carvalho Chehab

docs: Fix more broken references

As we move stuff around, some doc references are broken. Fix some of
them via this script:
	./scripts/documentation-file-ref-check --fix

Manually checked that produced results are valid.
Acked-by: 's avatarMatthias Brugger <matthias.bgg@gmail.com>
Acked-by: 's avatarTakashi Iwai <tiwai@suse.de>
Acked-by: 's avatarJeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: 's avatarGuenter Roeck <linux@roeck-us.net>
Acked-by: 's avatarMiguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: 's avatarMauro Carvalho Chehab <mchehab+samsung@kernel.org>
Acked-by: 's avatarJonathan Corbet <corbet@lwn.net>
parent a78513c6
......@@ -31,10 +31,10 @@ This binding uses the common clock binding[1].
Each subnode should use the binding described in [2]..[7]
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[3] Documentation/devicetree/bindings/clock/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st,clkgen-pll.txt
[7] Documentation/devicetree/bindings/clock/st,quadfs.txt
[8] Documentation/devicetree/bindings/clock/st,flexgen.txt
[3] Documentation/devicetree/bindings/clock/st/st,clkgen-mux.txt
[4] Documentation/devicetree/bindings/clock/st/st,clkgen-pll.txt
[7] Documentation/devicetree/bindings/clock/st/st,quadfs.txt
[8] Documentation/devicetree/bindings/clock/st/st,flexgen.txt
Required properties:
......
......@@ -10,7 +10,7 @@ will be controlled instead and the corresponding hw-ops for
that is used.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
[3] Documentation/devicetree/bindings/clock/ti/clockdomain.txt
Required properties:
......
......@@ -9,7 +9,7 @@ companion clock finding (match corresponding functional gate
clock) and hardware autoidle enable / disable.
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
[2] Documentation/devicetree/bindings/clock/gate-clock.txt
[2] Documentation/devicetree/bindings/clock/gpio-gate-clock.txt
Required properties:
- compatible : shall be one of:
......
......@@ -8,7 +8,7 @@ Required properties:
"intermediate" - A parent of "cpu" clock which is used as "intermediate" clock
source (usually MAINPLL) when the original CPU PLL is under
transition and not stable yet.
Please refer to Documentation/devicetree/bindings/clk/clock-bindings.txt for
Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
generic clock consumer properties.
- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
for detail.
......
......@@ -12,7 +12,7 @@ Required properties:
- clocks: Phandles for clock specified in "clock-names" property
- clock-names : The name of clock used by the DFI, must be
"pclk_ddr_mon";
- operating-points-v2: Refer to Documentation/devicetree/bindings/power/opp.txt
- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
- center-supply: DMC supply node.
- status: Marks the node enabled/disabled.
......
......@@ -34,7 +34,7 @@ Optional properties:
- mali-supply : Phandle to regulator for the Mali device. Refer to
Documentation/devicetree/bindings/regulator/regulator.txt for details.
- operating-points-v2 : Refer to Documentation/devicetree/bindings/power/opp.txt
- operating-points-v2 : Refer to Documentation/devicetree/bindings/opp/opp.txt
for details.
......
......@@ -44,7 +44,7 @@ Optional properties:
- memory-region:
Memory region to allocate from, as defined in
Documentation/devicetree/bindi/reserved-memory/reserved-memory.txt
Documentation/devicetree/bindings/reserved-memory/reserved-memory.txt
- mali-supply:
Phandle to regulator for the Mali device, as defined in
......
......@@ -12,7 +12,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules:
It is interfaced to host controller using SPI interface by a proprietary hardware
called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap.
See the following for pwarp node definitions:
Documentation/devicetree/bindings/soc/pwrap.txt
Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
This document describes the binding for MFD device and its sub module.
......
......@@ -9,7 +9,7 @@ Required properties:
The prcm node may contain several subdevices definitions:
- see Documentation/devicetree/clk/sunxi.txt for clock devices
- see Documentation/devicetree/reset/allwinner,sunxi-clock-reset.txt for reset
- see Documentation/devicetree/bindings/reset/allwinner,sunxi-clock-reset.txt for reset
controller devices
......
......@@ -62,7 +62,7 @@ Required properties for a slot (Deprecated - Recommend to use one slot per host)
rest of the gpios (depending on the bus-width property) are the data lines in
no particular order. The format of the gpio specifier depends on the gpio
controller.
(Deprecated - Refer to Documentation/devicetree/binding/pinctrl/samsung-pinctrl.txt)
(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt)
Example:
......
......@@ -6,7 +6,7 @@ Required properties:
- compatible: For external switch chips, compatible string must be exactly one
of: "microchip,ksz9477"
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required and optional properties.
Examples:
......
......@@ -31,7 +31,7 @@ Required properties for the child nodes within ports container:
- phy-mode: String, must be either "trgmii" or "rgmii" for port labeled
"cpu".
See Documentation/devicetree/bindings/dsa/dsa.txt for a list of additional
See Documentation/devicetree/bindings/net/dsa/dsa.txt for a list of additional
required, optional properties and how the integrated switch subnodes must
be specified.
......
......@@ -14,7 +14,7 @@ Required properties:
datasheet
- interrupts: Should contain one interrupt specifier for the GPC interrupt
- clocks: Must contain an entry for each entry in clock-names.
See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
- clock-names: Must include the following entries:
- ipg
......
......@@ -22,7 +22,7 @@ List of legacy properties and respective binding document
3. "has-tpo" Documentation/devicetree/bindings/rtc/rtc-opal.txt
4. "linux,wakeup" Documentation/devicetree/bindings/input/gpio-matrix-keypad.txt
Documentation/devicetree/bindings/mfd/tc3589x.txt
Documentation/devicetree/bindings/input/ads7846.txt
Documentation/devicetree/bindings/input/touchscreen/ads7846.txt
5. "linux,keypad-wakeup" Documentation/devicetree/bindings/input/qcom,pm8xxx-keypad.txt
6. "linux,input-wakeup" Documentation/devicetree/bindings/input/samsung-keypad.txt
7. "nvidia,wakeup-source" Documentation/devicetree/bindings/input/nvidia,tegra20-kbc.txt
......
......@@ -16,7 +16,7 @@ A child node must exist to represent the core DWC3 IP block. The name of
the node is not important. The content of the node is defined in dwc3.txt.
Phy documentation is provided in the following places:
Documentation/devicetree/bindings/phy/rockchip,dwc3-usb-phy.txt
Documentation/devicetree/bindings/phy/qcom-dwc3-usb-phy.txt
Example device nodes:
......
......@@ -53,7 +53,7 @@ bus supply voltage.
The shunt value in micro-ohms can be set via platform data or device tree at
compile-time or via the shunt_resistor attribute in sysfs at run-time. Please
refer to the Documentation/devicetree/bindings/i2c/ina2xx.txt for bindings
refer to the Documentation/devicetree/bindings/hwmon/ina2xx.txt for bindings
if the device tree is used.
Additionally ina226 supports update_interval attribute as described in
......
......@@ -41,7 +41,7 @@ named ``char-misc-next``, you would be using the following command::
that will create a signed tag called ``char-misc-4.15-rc1`` based on the
last commit in the ``char-misc-next`` branch, and sign it with your gpg key
(see :ref:`Documentation/maintainer/configure_git.rst <configuregit>`).
(see :ref:`Documentation/maintainer/configure-git.rst <configuregit>`).
Linus will only accept pull requests based on a signed tag. Other
maintainers may differ.
......
......@@ -160,7 +160,7 @@ mtk.manpages@gmail.com의 메인테이너에게 보낼 것을 권장한다.
독특한 행동에 관하여 흔히 있는 오해들과 혼란들을 해소하고 있기
때문이다.
:ref:`Documentation/process/stable_kernel_rules.rst <stable_kernel_rules>`
:ref:`Documentation/process/stable-kernel-rules.rst <stable_kernel_rules>`
이 문서는 안정적인 커널 배포가 이루어지는 규칙을 설명하고 있으며
여러분들이 이러한 배포들 중 하나에 변경을 하길 원한다면
무엇을 해야 하는지를 설명한다.
......
......@@ -4513,7 +4513,7 @@ DRM DRIVER FOR ILITEK ILI9225 PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/ili9225.c
F: Documentation/devicetree/bindings/display/ili9225.txt
F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
DRM DRIVER FOR INTEL I810 VIDEO CARDS
S: Orphan / Obsolete
......@@ -4599,13 +4599,13 @@ DRM DRIVER FOR SITRONIX ST7586 PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/st7586.c
F: Documentation/devicetree/bindings/display/st7586.txt
F: Documentation/devicetree/bindings/display/sitronix,st7586.txt
DRM DRIVER FOR SITRONIX ST7735R PANELS
M: David Lechner <david@lechnology.com>
S: Maintained
F: drivers/gpu/drm/tinydrm/st7735r.c
F: Documentation/devicetree/bindings/display/st7735r.txt
F: Documentation/devicetree/bindings/display/sitronix,st7735r.txt
DRM DRIVER FOR TDFX VIDEO CARDS
S: Orphan / Obsolete
......@@ -4824,7 +4824,7 @@ M: Eric Anholt <eric@anholt.net>
S: Supported
F: drivers/gpu/drm/v3d/
F: include/uapi/drm/v3d_drm.h
F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
F: Documentation/devicetree/bindings/gpu/brcm,bcm-v3d.txt
T: git git://anongit.freedesktop.org/drm/drm-misc
DRM DRIVERS FOR VC4
......@@ -5735,7 +5735,7 @@ M: Madalin Bucur <madalin.bucur@nxp.com>
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/ethernet/freescale/fman
F: Documentation/devicetree/bindings/powerpc/fsl/fman.txt
F: Documentation/devicetree/bindings/net/fsl-fman.txt
FREESCALE QORIQ PTP CLOCK DRIVER
M: Yangbo Lu <yangbo.lu@nxp.com>
......@@ -7425,7 +7425,7 @@ M: Linus Walleij <linus.walleij@linaro.org>
L: linux-iio@vger.kernel.org
S: Maintained
F: drivers/iio/gyro/mpu3050*
F: Documentation/devicetree/bindings/iio/gyroscope/inv,mpu3050.txt
F: Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.txt
IOC3 ETHERNET DRIVER
M: Ralf Baechle <ralf@linux-mips.org>
......@@ -8700,7 +8700,7 @@ M: Guenter Roeck <linux@roeck-us.net>
L: linux-hwmon@vger.kernel.org
S: Maintained
F: Documentation/hwmon/max6697
F: Documentation/devicetree/bindings/i2c/max6697.txt
F: Documentation/devicetree/bindings/hwmon/max6697.txt
F: drivers/hwmon/max6697.c
F: include/linux/platform_data/max6697.h
......@@ -9080,7 +9080,7 @@ M: Martin Donnelly <martin.donnelly@ge.com>
M: Martyn Welch <martyn.welch@collabora.co.uk>
S: Maintained
F: drivers/gpu/drm/bridge/megachips-stdpxxxx-ge-b850v3-fw.c
F: Documentation/devicetree/bindings/video/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
F: Documentation/devicetree/bindings/display/bridge/megachips-stdpxxxx-ge-b850v3-fw.txt
MEGARAID SCSI/SAS DRIVERS
M: Kashyap Desai <kashyap.desai@broadcom.com>
......@@ -10728,7 +10728,7 @@ PARALLEL LCD/KEYPAD PANEL DRIVER
M: Willy Tarreau <willy@haproxy.com>
M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
S: Odd Fixes
F: Documentation/misc-devices/lcd-panel-cgram.txt
F: Documentation/auxdisplay/lcd-panel-cgram.txt
F: drivers/misc/panel.c
PARALLEL PORT SUBSYSTEM
......@@ -13291,7 +13291,7 @@ M: Vinod Koul <vkoul@kernel.org>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
T: git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
S: Supported
F: Documentation/sound/alsa/compress_offload.txt
F: Documentation/sound/designs/compress-offload.rst
F: include/sound/compress_driver.h
F: include/uapi/sound/compress_*
F: sound/core/compress_offload.c
......
......@@ -33,7 +33,7 @@ config E100
to identify the adapter.
More specific information on configuring the driver is in
<file:Documentation/networking/e100.txt>.
<file:Documentation/networking/e100.rst>.
To compile this driver as a module, choose M here. The module
will be called e100.
......@@ -49,7 +49,7 @@ config E1000
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
<file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called e1000.
......@@ -94,7 +94,7 @@ config IGB
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
<file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called igb.
......@@ -130,7 +130,7 @@ config IGBVF
<http://support.intel.com>
More specific information on configuring the driver is in
<file:Documentation/networking/e1000.txt>.
<file:Documentation/networking/e1000.rst>.
To compile this driver as a module, choose M here. The module
will be called igbvf.
......
......@@ -1291,7 +1291,7 @@ static int _sdw_prepare_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
* Documentation/soundwire/stream.txt explains this API in detail
* Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_prepare_stream(struct sdw_stream_runtime *stream)
{
......@@ -1348,7 +1348,7 @@ static int _sdw_enable_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
* Documentation/soundwire/stream.txt explains this API in detail
* Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_enable_stream(struct sdw_stream_runtime *stream)
{
......@@ -1400,7 +1400,7 @@ static int _sdw_disable_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
* Documentation/soundwire/stream.txt explains this API in detail
* Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_disable_stream(struct sdw_stream_runtime *stream)
{
......@@ -1456,7 +1456,7 @@ static int _sdw_deprepare_stream(struct sdw_stream_runtime *stream)
*
* @stream: Soundwire stream
*
* Documentation/soundwire/stream.txt explains this API in detail
* Documentation/driver-api/soundwire/stream.rst explains this API in detail
*/
int sdw_deprepare_stream(struct sdw_stream_runtime *stream)
{
......
......@@ -168,7 +168,7 @@ config BINFMT_MISC
will automatically feed it to the correct interpreter.
You can do other nice things, too. Read the file
<file:Documentation/binfmt_misc.txt> to learn how to use this
<file:Documentation/admin-guide/binfmt-misc.rst> to learn how to use this
feature, <file:Documentation/admin-guide/java.rst> for information about how
to include Java support. and <file:Documentation/admin-guide/mono.rst> for
information about how to include Mono-based .NET support.
......
......@@ -4,7 +4,7 @@
* Copyright (C) 1997 Richard Günther
*
* binfmt_misc detects binaries via a magic or filename extension and invokes
* a specified wrapper. See Documentation/binfmt_misc.txt for more details.
* a specified wrapper. See Documentation/admin-guide/binfmt-misc.rst for more details.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment