Commit 5306c31c authored by Andi Kleen's avatar Andi Kleen Committed by Ingo Molnar

perf/x86/uncore/hsw-ep: Handle systems with only two SBOXes

There was another report of a boot failure with a #GP fault in the
uncore SBOX initialization. The earlier work around was not enough
for this system.

The boot was failing while trying to initialize the third SBOX.

This patch detects parts with only two SBOXes and limits the number
of SBOX units to two there.

Stable material, as it affects boot problems on 3.18.
Tested-by: default avatarAndreas Oehler <andreas@oehler-net.de>
Signed-off-by: default avatarAndi Kleen <ak@linux.intel.com>
Signed-off-by: default avatarPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: <stable@vger.kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yan, Zheng <zheng.z.yan@intel.com>
Link: http://lkml.kernel.org/r/1420583675-9163-1-git-send-email-andi@firstfloor.orgSigned-off-by: default avatarIngo Molnar <mingo@kernel.org>
parent 86c269fe
......@@ -17,7 +17,7 @@
#define UNCORE_PCI_DEV_TYPE(data) ((data >> 8) & 0xff)
#define UNCORE_PCI_DEV_IDX(data) (data & 0xff)
#define UNCORE_EXTRA_PCI_DEV 0xff
#define UNCORE_EXTRA_PCI_DEV_MAX 2
#define UNCORE_EXTRA_PCI_DEV_MAX 3
/* support up to 8 sockets */
#define UNCORE_SOCKET_MAX 8
......
......@@ -891,6 +891,7 @@ void snbep_uncore_cpu_init(void)
enum {
SNBEP_PCI_QPI_PORT0_FILTER,
SNBEP_PCI_QPI_PORT1_FILTER,
HSWEP_PCI_PCU_3,
};
static int snbep_qpi_hw_config(struct intel_uncore_box *box, struct perf_event *event)
......@@ -2026,6 +2027,17 @@ void hswep_uncore_cpu_init(void)
{
if (hswep_uncore_cbox.num_boxes > boot_cpu_data.x86_max_cores)
hswep_uncore_cbox.num_boxes = boot_cpu_data.x86_max_cores;
/* Detect 6-8 core systems with only two SBOXes */
if (uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3]) {
u32 capid4;
pci_read_config_dword(uncore_extra_pci_dev[0][HSWEP_PCI_PCU_3],
0x94, &capid4);
if (((capid4 >> 6) & 0x3) == 0)
hswep_uncore_sbox.num_boxes = 2;
}
uncore_msr_uncores = hswep_msr_uncores;
}
......@@ -2287,6 +2299,11 @@ static DEFINE_PCI_DEVICE_TABLE(hswep_uncore_pci_ids) = {
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
SNBEP_PCI_QPI_PORT1_FILTER),
},
{ /* PCU.3 (for Capability registers) */
PCI_DEVICE(PCI_VENDOR_ID_INTEL, 0x2fc0),
.driver_data = UNCORE_PCI_DEV_DATA(UNCORE_EXTRA_PCI_DEV,
HSWEP_PCI_PCU_3),
},
{ /* end: all zeroes */ }
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment