Commit 8a1115ff authored by Masahiro Yamada's avatar Masahiro Yamada Committed by Linus Torvalds

scripts/spelling.txt: add "disble(d)" pattern and fix typo instances

Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.comSigned-off-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
parent 6bbc4a41
......@@ -10,7 +10,7 @@ Note that kcov does not aim to collect as much coverage as possible. It aims
to collect more or less stable coverage that is function of syscall inputs.
To achieve this goal it does not collect coverage in soft/hard interrupts
and instrumentation of some inherently non-deterministic parts of kernel is
disbled (e.g. scheduler, locking).
disabled (e.g. scheduler, locking).
Usage
-----
......
......@@ -2086,7 +2086,7 @@ static void cryptocop_job_queue_close(void)
dma_in_cfg.en = regk_dma_no;
REG_WR(dma, IN_DMA_INST, rw_cfg, dma_in_cfg);
/* Disble the cryptocop. */
/* Disable the cryptocop. */
rw_cfg = REG_RD(strcop, regi_strcop, rw_cfg);
rw_cfg.en = 0;
REG_WR(strcop, regi_strcop, rw_cfg, rw_cfg);
......
......@@ -535,7 +535,7 @@ static void run_sync(void)
{
int enable_irqs = irqs_disabled();
/* We may be called with interrupts disbled (on bootup). */
/* We may be called with interrupts disabled (on bootup). */
if (enable_irqs)
local_irq_enable();
on_each_cpu(do_sync_core, NULL, 1);
......
......@@ -82,7 +82,7 @@ void cryp_activity(struct cryp_device_data *device_data,
void cryp_flush_inoutfifo(struct cryp_device_data *device_data)
{
/*
* We always need to disble the hardware before trying to flush the
* We always need to disable the hardware before trying to flush the
* FIFO. This is something that isn't written in the design
* specification, but we have been informed by the hardware designers
* that this must be done.
......
......@@ -788,7 +788,7 @@ static int sdma_v3_0_start(struct amdgpu_device *adev)
}
}
/* disble sdma engine before programing it */
/* disable sdma engine before programing it */
sdma_v3_0_ctx_switch_enable(adev, false);
sdma_v3_0_enable(adev, false);
......
......@@ -543,7 +543,7 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
/*
* In case a device driver's probe() fails (e.g.,
* util_probe() -> vmbus_open() returns -ENOMEM) and the device is
* rescinded later (e.g., we dynamically disble an Integrated Service
* rescinded later (e.g., we dynamically disable an Integrated Service
* in Hyper-V Manager), the driver's remove() invokes vmbus_close():
* here we should skip most of the below cleanup work.
*/
......
......@@ -239,7 +239,7 @@ static void st5481B_mode(struct st5481_bcs *bcs, int mode)
}
}
} else {
// Disble B channel interrupts
// Disable B channel interrupts
st5481_usb_device_ctrl_msg(adapter, FFMSK_B1+(bcs->channel * 2), 0, NULL, NULL);
// Disable B channel FIFOs
......
......@@ -186,7 +186,7 @@ static inline int write_enable(struct spi_nor *nor)
}
/*
* Send write disble instruction to the chip.
* Send write disable instruction to the chip.
*/
static inline int write_disable(struct spi_nor *nor)
{
......
......@@ -1163,7 +1163,7 @@ struct ib_mac_iocb_rsp {
u8 opcode; /* 0x20 */
u8 flags1;
#define IB_MAC_IOCB_RSP_OI 0x01 /* Overide intr delay */
#define IB_MAC_IOCB_RSP_I 0x02 /* Disble Intr Generation */
#define IB_MAC_IOCB_RSP_I 0x02 /* Disable Intr Generation */
#define IB_MAC_CSUM_ERR_MASK 0x1c /* A mask to use for csum errs */
#define IB_MAC_IOCB_RSP_TE 0x04 /* Checksum error */
#define IB_MAC_IOCB_RSP_NU 0x08 /* No checksum rcvd */
......
......@@ -6278,7 +6278,7 @@ ahd_reset(struct ahd_softc *ahd, int reinit)
* does not disable its parity logic prior to
* the start of the reset. This may cause a
* parity error to be detected and thus a
* spurious SERR or PERR assertion. Disble
* spurious SERR or PERR assertion. Disable
* PERR and SERR responses during the CHIPRST.
*/
mod_cmd = cmd & ~(PCIM_CMD_PERRESPEN|PCIM_CMD_SERRESPEN);
......
......@@ -84,8 +84,7 @@ static int ep_open(struct inode *, struct file *);
/* /dev/gadget/$CHIP represents ep0 and the whole device */
enum ep0_state {
/* DISBLED is the initial state.
*/
/* DISABLED is the initial state. */
STATE_DEV_DISABLED = 0,
/* Only one open() of /dev/gadget/$CHIP; only one file tracks
......
......@@ -868,7 +868,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
spin_lock_irqsave(&xhci->lock, flags);
/* disble usb3 ports Wake bits*/
/* disable usb3 ports Wake bits */
port_index = xhci->num_usb3_ports;
port_array = xhci->usb3_ports;
while (port_index--) {
......@@ -879,7 +879,7 @@ static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
writel(t2, port_array[port_index]);
}
/* disble usb2 ports Wake bits*/
/* disable usb2 ports Wake bits */
port_index = xhci->num_usb2_ports;
port_array = xhci->usb2_ports;
while (port_index--) {
......
......@@ -65,7 +65,7 @@ struct regulator_state {
int uV; /* suspend voltage */
unsigned int mode; /* suspend regulator operating mode */
int enabled; /* is regulator enabled in this suspend state */
int disabled; /* is the regulator disbled in this suspend state */
int disabled; /* is the regulator disabled in this suspend state */
};
/**
......
......@@ -2669,7 +2669,7 @@ static bool css_visible(struct cgroup_subsys_state *css)
*
* Returns 0 on success, -errno on failure. On failure, csses which have
* been processed already aren't cleaned up. The caller is responsible for
* cleaning up with cgroup_apply_control_disble().
* cleaning up with cgroup_apply_control_disable().
*/
static int cgroup_apply_control_enable(struct cgroup *cgrp)
{
......
......@@ -998,7 +998,7 @@ list_update_cgroup_event(struct perf_event *event,
*/
#define PERF_CPU_HRTIMER (1000 / HZ)
/*
* function must be called with interrupts disbled
* function must be called with interrupts disabled
*/
static enum hrtimer_restart perf_mux_hrtimer_handler(struct hrtimer *hr)
{
......
......@@ -372,6 +372,8 @@ disassocation||disassociation
disapear||disappear
disapeared||disappeared
disappared||disappeared
disble||disable
disbled||disabled
disconnet||disconnect
discontinous||discontinuous
dispertion||dispersion
......
......@@ -89,7 +89,7 @@ static void acp_reg_write(u32 val, void __iomem *acp_mmio, u32 reg)
writel(val, acp_mmio + (reg * 4));
}
/* Configure a given dma channel parameters - enable/disble,
/* Configure a given dma channel parameters - enable/disable,
* number of descriptors, priority
*/
static void config_acp_dma_channel(void __iomem *acp_mmio, u8 ch_num,
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment