Commit cdc5a311 authored by Alexandra Yates's avatar Alexandra Yates Committed by Wolfram Sang

i2c: i801: add Intel Lewisburg device IDs

Adding Intel codename Lewisburg platform device IDs for SMBus.
Signed-off-by: default avatarAlexandra Yates <alexandra.yates@linux.intel.com>
Reviewed-by: default avatarJean Delvare <jdelvare@suse.de>
Signed-off-by: default avatarWolfram Sang <wsa@the-dreams.de>
parent c18fba23
......@@ -32,6 +32,7 @@ Supported adapters:
* Intel Sunrise Point-LP (PCH)
* Intel DNV (SOC)
* Intel Broxton (SOC)
* Intel Lewisburg (PCH)
Datasheets: Publicly available at the Intel website
On Intel Patsburg and later chipsets, both the normal host SMBus controller
......
......@@ -126,6 +126,7 @@ config I2C_I801
Sunrise Point-LP (PCH)
DNV (SOC)
Broxton (SOC)
Lewisburg (PCH)
This driver can also be built as a module. If so, the module
will be called i2c-i801.
......
......@@ -62,6 +62,8 @@
* Sunrise Point-LP (PCH) 0x9d23 32 hard yes yes yes
* DNV (SOC) 0x19df 32 hard yes yes yes
* Broxton (SOC) 0x5ad4 32 hard yes yes yes
* Lewisburg (PCH) 0xa1a3 32 hard yes yes yes
* Lewisburg Supersku (PCH) 0xa223 32 hard yes yes yes
*
* Features supported by this driver:
* Software PEC no
......@@ -206,6 +208,8 @@
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS 0x9d23
#define PCI_DEVICE_ID_INTEL_DNV_SMBUS 0x19df
#define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS 0x5ad4
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS 0xa1a3
#define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS 0xa223
struct i801_mux_config {
char *gpio_chip;
......@@ -869,6 +873,8 @@ static const struct pci_device_id i801_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_DNV_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BROXTON_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
{ 0, }
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment