1. 28 Dec, 2018 1 commit
  2. 18 Dec, 2018 2 commits
  3. 17 Dec, 2018 1 commit
  4. 15 Dec, 2018 4 commits
  5. 27 Nov, 2018 1 commit
  6. 25 Nov, 2018 5 commits
  7. 20 Nov, 2018 3 commits
  8. 14 Nov, 2018 2 commits
  9. 19 Oct, 2018 3 commits
  10. 17 Oct, 2018 3 commits
  11. 16 Oct, 2018 1 commit
  12. 06 Sep, 2018 1 commit
    • Ye Li's avatar
      MLK-19465 imx8mq: Fix cpu rev issue on B0.1 chip · 8be98e93
      Ye Li authored
      We read the ROM version to determine the CPU revision before B1 chip.
      The rom version is 4 bytes word, it has major version at low byte,
      minor version at second byte.
      On B0.1 chip, the value is 0x1020 not 0x20, if reading the word and comparing
      with 0x20, the result is wrong.
      Fix the issue by only reading the lowest byte for major version.
      Signed-off-by: default avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit 8d0812e63155cca91ecb78c630a450e7d5e5fd00)
  13. 05 Sep, 2018 7 commits
  14. 03 Sep, 2018 1 commit
    • Ye Li's avatar
      MLK-19355 imx8mm: Enable sec_debug clock in SPL · c738b76a
      Ye Li authored
      ipg_stop from GPC is not connected to WDOG directly, the sec_debug clock is
      used to sample the ipg_stop from GPC. So when this clock is off, ipg_stop input
      of WDOG can’t assert, WDOG will fail to stop in DSM mode.
      Enable this clock forever in SPL, so other SW don't need to touch it.
      Signed-off-by: default avatarYe Li <ye.li@nxp.com>
      Tested-by: default avatarBai Ping <ping.bai@nxp.com>
      (cherry picked from commit 1da6c9b3a837d15c25086af449462d5e8b56c290)
  15. 31 Aug, 2018 1 commit
  16. 28 Aug, 2018 2 commits
    • Ye Li's avatar
      MLK-19356 fastboot: Fix ucmd issue in fastboot · a8569856
      Ye Li authored
      After executing each ucmd, the ucmd callback function always call fastboot_setup
      to setup some enviroments.
      Because the mmc will be switched to user area by calling blk_get_dev in _fastboot_load_partitions.
      When running "mmc partconf" by ucmd, the PART_CONFIG EXTCSD is updated, but the part_config and
      hwpart variables in mmc and blk structure are not synced. So the old value will write to
      PART_CONFIG EXTCSD again when switch to user area.
      This patch changes the fastboot_setup, only load the partitions when the storage device is changed.
      Also force to re-init mmc before loading the partitions to sync mmc variables.
      Signed-off-by: default avatarYe Li <ye.li@nxp.com>
      (cherry picked from commit c9cd93b25586ecd4ce9178da7b8141f60cdd9deb)
    • Zhang Bo's avatar
      MA-12536[Android] Enable RTC for imx8m in uboot · b6a1a19c
      Zhang Bo authored
      Enable RTC in bootloader to avoid rtc time less than jiffies time
      when linux first bootup after RTC lose power.
      It will cause the issue as
      MA-9554[Android_6DL_SD]RTC: Sometimes the RTC reset to the initial
      time 1970 after softare reboot the first time. 40%
      Change-Id: I0c87180640be98a2c928a30c6949f91f4515844d
      Signed-off-by: default avatarZhang Bo <bo.zhang@nxp.com>
  17. 21 Aug, 2018 1 commit
  18. 16 Aug, 2018 1 commit