Commit 2037f2a0 authored by David Boddie's avatar David Boddie 💬
Browse files

Merge branch 'revise-reflashing-info' into 'master'

Update reflashing instructions to avoid battery handling

See merge request Librem5/developer.puri.sm!357
parents e865f7ef cb5e41a1
Pipeline #49707 passed with stages
in 1 minute and 24 seconds
...@@ -84,8 +84,8 @@ The phone needs to be put in the correct boot mode. ...@@ -84,8 +84,8 @@ The phone needs to be put in the correct boot mode.
Not doing these steps in this order could cause the flashing to fail. Not doing these steps in this order could cause the flashing to fail.
#. Take out the battery **and** disconnect the USB C cable. #. Disconnect the USB C cable.
#. While holding the Volume Up button, insert the battery. #. Press and hold the Volume Up and power buttons for 18 seconds.
#. Plug one end of the USB C cable into your workstation. #. Plug one end of the USB C cable into your workstation.
#. Plug the other end of the USB C cable into the phone. #. Plug the other end of the USB C cable into the phone.
...@@ -125,7 +125,7 @@ Successful output will look something like this:: ...@@ -125,7 +125,7 @@ Successful output will look something like this::
Success 1 Failure 0 Success 1 Failure 0
Now power cycle the phone by removing the USB C and battery. Then install the battery first before plugging in the USB C cable to a power source. Remove the USB C cable and hold down the power button for 15-18 seconds to reset the phone.
Your phone should now be running the latest image. Your phone should now be running the latest image.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment