Commit a2f1b1e5 authored by David Boddie's avatar David Boddie 💬
Browse files

Fix markup before code blocks

parent e007c468
Pipeline #4318 passed with stage
in 9 minutes and 49 seconds
......@@ -174,7 +174,7 @@ steps. The script backs up the rsi modules in ``/lib/modules``, copies the
firmware into lib firmware, then modprobes the rsi flashing modules.
It replaces the original modules when it has finished.
Run the script on the target to reflash.::
Run the script on the target to reflash::
root@pureos-test:~# flash_rsi.sh
......@@ -185,14 +185,14 @@ Creating a Test initramfs
Download the latest image and kernel
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Download the latest kernel and RS9116 out of tree modules.::
Download the latest kernel and RS9116 out of tree modules::
./scripts/fetch_latest.sh -k
Extract the kernel
~~~~~~~~~~~~~~~~~~
The kernel needs to be extracted from the deb for the SDP boot.::
The kernel needs to be extracted from the deb for the SDP boot::
./scripts/extract_kernel.sh
......@@ -201,7 +201,7 @@ Build the test filesystem tarball
This will create a minimal debian rootfs tarball to be used to create an
initramfs. If you need additional packages you can add them to the
packages variable in the script.::
packages variable in the script::
./scripts/create_tarball.sh
......@@ -209,12 +209,12 @@ Create the initramfs
~~~~~~~~~~~~~~~~~~~~
This will take the tarball created above and customize it to be able to
flash the RS9116 module and also adds some test scripts.::
flash the RS9116 module and also adds some test scripts::
./scripts/create_initramfs.sh -t build/test_rootfs.tgz -o files/test_initramfs.img
You can include a locally generated kernel, modules and devicetree as
well.::
well::
./scripts/create_initramfs.sh -t build/test_rootfs.tgz -o files/test_initramfs.img -i <path to kernel>
......@@ -224,14 +224,14 @@ Boot the initramfs
The initramfs can be booted on a board with an empty eMMC for testing
and RS9116 flashing. Ensure the boot mode switch is switched to USB
boot. Run the command below and then plug in the USB C port of the
devkit.::
devkit::
sudo uuu uuu_scripts/test_librem5.lst
RS9116 normal operation
~~~~~~~~~~~~~~~~~~~~~~~
To use the RS9116 without flashing just load the modules by hand.::
To use the RS9116 without flashing just load the modules by hand::
root@pureos-test:~# modprobe rsi_sdio
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment