Commit df27ea32 authored by David Boddie's avatar David Boddie
Browse files

Add more hints about reflashing the phone

parent fef3b291
Pipeline #49835 passed with stage
in 1 minute and 6 seconds
Reflashing the Phone Reflashing the Phone
==================== ====================
This guide describes how to reflash the system image on your Librem 5 phone from a workstation, using a USB-C cable. This guide describes how to reflash the system image on your Librem 5 phone from a workstation, using a USB-A to USB-C cable.
.. contents:: .. contents::
:local: :local:
...@@ -82,6 +82,8 @@ Prepare the Phone ...@@ -82,6 +82,8 @@ Prepare the Phone
The phone needs to be put in the correct boot mode. The phone itself will not provide an indication of the boot mode -- the workstation is used to check this. The phone needs to be put in the correct boot mode. The phone itself will not provide an indication of the boot mode -- the workstation is used to check this.
Ensure that the phone is switched off. Use the power icon in the panel at the top of the screen to do this if the system software is running.
Not doing these steps in this order could cause the flashing to fail: Not doing these steps in this order could cause the flashing to fail:
#. Disconnect the USB C cable. #. Disconnect the USB C cable.
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment