Commit 57b6ef0a authored by David Boddie's avatar David Boddie

Merge branch 'deploy-test'

parents e742631a b8f4b290
Pipeline #3087 passed with stages
in 11 minutes and 25 seconds
......@@ -20,7 +20,7 @@ publish:
stage: deploy
environment:
name: production
url: http://storage.puri.sm/testdeploy/
url: https://developer.puri.sm/Librem5/
before_script:
- export DEBIAN_FRONTEND=noninteractive
- apt-get -y update
......@@ -36,6 +36,7 @@ publish:
- touch ~/.ssh/id_rsa
- chmod 0600 ~/.ssh/id_rsa
- echo "$SSH_KEY" >> ~/.ssh/id_rsa
- rsync -av -v -e "ssh -l $SSH_USER -p $SSH_PORT" --delete-after _build/html/ $RSYNC_TARGET
- echo "$RSYNC_TARGET"
- rsync -av -v --stats -i -e "ssh -l $SSH_USER -p $SSH_PORT" --delete-after _build/html/ $RSYNC_TARGET
only:
- master
......@@ -21,6 +21,8 @@ Issues
* The attached display does not function correctly at the time of writing
(2018-12-09), so an external display is required for development of
graphical applications.
* The sshd daemon can take up to 480 seconds to start after boot -- see
`linux-emcraft issue 2`_ for details.
Status of Subsystems
--------------------
......@@ -65,21 +67,22 @@ whether user space software is in place to drive it.
"Smart card reader", "Yes", ""
"Touch controller", "Yes", ""
"JTAG", "Yes", ""
"WLAN/BT antennae", "Yes", ""
"On-board microphone", "Yes", ""
"Headset microphone", "Yes", ""
"HKSs", "Yes", ""
"Microphone select IC", "Yes", ""
"MIPI DSI LCD panel", "Partially", ""
"Camera", "Partially", ""
"IMU", "Partially", ""
"Proximity/Ambient light sensor", "Partially", ""
"WLAN/BT antennae", "Partially", ""
"On-board microphone", "Partially", ""
"Headset microphone", "Partially", ""
"HKSs", "Partially", ""
"MIPI DSI LCD panel", "Partially", ""
"USB OTG", "Partially", ""
"USB-C role switching", "No", ""
"Microphone select IC", "No", ""
"Bluetooth (UART4)", "No", ""
"Camera", "No", ""
"USB OTG", "No", ""
"WWAN I2S interface", "No", ""
"Bluetooth I2S interface", "No", ""
.. _`Apps Issues`: https://source.puri.sm/Librem5/Apps_Issues
.. _`OS Issues`: https://source.puri.sm/Librem5/OS-issues
.. _`open devkit issues`: https://source.puri.sm/groups/Librem5/-/issues?scope=all&utf8=%E2%9C%93&state=opened&label_name%5B%5D=devkit
.. _`linux-emcraft issue 2`: https://source.puri.sm/Librem5/linux-emcraft/issues/2
......@@ -89,9 +89,6 @@ If this procedure didn't work for you, please `get in touch`_.
.. _`get in touch`: https://developer.puri.sm/Librem5/Contact.html
**Note:** the HDMI display will not be used by the development board even if
connected.
Flashing eMMC
-------------
......
......@@ -32,7 +32,7 @@ Librem 5 Devkit
* WWAN (Modem)
* Wifi/Bluetooth
* Microphone
* Microphone and Camera
* `NXP SGTL5000 <https://www.nxp.com/products/media-and-audio/audio-converters/audio-codec/ultra-low-power-audio-codec:SGTL5000>`_ audio codec [`datasheet <SGTL5000_>`_]
* `CUI CMC-2242PBL-A <https://www.cui.com/product/audio/microphones/electret-condenser-microphones/cmc-2242pbl-a>`_ electret condenser microphone [`datasheet <CMC-2242PBL-A_>`_]
......@@ -43,7 +43,7 @@ Librem 5 Devkit
* ublox MAX-M8Q GNSS (UART interface and antenna)
* Haptic motor
* ST LSM9D1 accelerometer, gyro, magnetometer
* JTAG port
* JTAG header (unpopulated)
* Proximity / ambient light sensor
* Push buttons (power button, reset button, volume up, volume down)
* RedPine WiFi/BT M.2 module on SDIO
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment