Commit 37b28b21 authored by David Boddie's avatar David Boddie 💬
Browse files

Add sample output from lsusb to help with eMMC flashing

parent d01ac3e9
......@@ -163,7 +163,14 @@ Next time you plug in the USB cable, devkit's USB interface will be accessible b
Flash the Image
~~~~~~~~~~~~~~~
Put the "Boot Mode" switch in the USB position. Attach the development board to a USB C or USB 3 port on the host that is capable of providing 900mA of current. The HID device should appear when using the ``lsusb`` command. Now you can proceed with the flashing.
Put the "Boot Mode" switch in the USB position. Attach the development board
to a USB C or USB 3 port on the host that is capable of providing 900mA of
current. The HID device should appear in the output of the ``lsusb`` command,
like this::
Bus 001 Device 005: ID 1fc9:012b NXP Semiconductors
Now you can proceed with the flashing.
**This will erase everything on your eMMC:**
......
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment