Commit 5ee67b58 authored by Yuan Yao's avatar Yuan Yao Committed by Mark Brown
Browse files

spi: dspi: clear SPI_SR before enable interrupt



Once dspi is used in uboot, the SPI_SR have been set by some value.
At this time, if kernel enable the interrupt before clear the
status flag, that will trigger the wrong interrupt.
Signed-off-by: default avatarYuan Yao <yao.yuan@nxp.com>
Signed-off-by: default avatarMark Brown <broonie@kernel.org>
parent 1001354c
......@@ -70,6 +70,7 @@
#define SPI_SR 0x2c
#define SPI_SR_EOQF 0x10000000
#define SPI_SR_TCFQF 0x80000000
#define SPI_SR_CLEAR 0xdaad0000
#define SPI_RSER 0x30
#define SPI_RSER_EOQFE 0x10000000
......@@ -646,6 +647,11 @@ static const struct regmap_config dspi_regmap_config = {
.max_register = 0x88,
};
static void dspi_init(struct fsl_dspi *dspi)
{
regmap_write(dspi->regmap, SPI_SR, SPI_SR_CLEAR);
}
static int dspi_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
......@@ -709,6 +715,7 @@ static int dspi_probe(struct platform_device *pdev)
return PTR_ERR(dspi->regmap);
}
dspi_init(dspi);
dspi->irq = platform_get_irq(pdev, 0);
if (dspi->irq < 0) {
dev_err(&pdev->dev, "can't get platform irq\n");
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment