Commit e718b3d4 authored by Eric Kuzmenko's avatar Eric Kuzmenko
Browse files

Use the imx8mq.dtsi file from Guido's repo

parent 392b4d4a
Pipeline #2204 failed with stage
in 7 minutes and 27 seconds
......@@ -33,38 +33,6 @@
mipi_dsi0 = &mipi_dsi;
};
linux,cma {
compatible = "shared-dma-pool";
reusable;
size = <0 0x3c000000>;
alloc-ranges = <0 0x40000000 0 0x40000000>;
linux,cma-default;
};
rpmsg_reserved: rpmsg@0xb8000000 {
no-map;
reg = <0 0xb8000000 0 0x100000>;
};
busfreq: imx_busfreq { /* BUSFREQ */
compatible = "fsl,imx_busfreq";
clocks = <&clk IMX8MQ_DRAM_PLL1>, <&clk IMX8MQ_CLK_DRAM_ALT_SRC>,
<&clk IMX8MQ_CLK_DRAM_APB_SRC>, <&clk IMX8MQ_CLK_DRAM_APB_PRE_DIV>,
<&clk IMX8MQ_CLK_DRAM_CORE>, <&clk IMX8MQ_CLK_DRAM_ALT_ROOT>,
<&clk IMX8MQ_SYS1_PLL_40M>, <&clk IMX8MQ_SYS1_PLL_400M>,
<&clk IMX8MQ_SYS1_PLL_100M>, <&clk IMX8MQ_SYS1_PLL_800M>,
<&clk IMX8MQ_CLK_NOC_DIV>, <&clk IMX8MQ_CLK_AHB_DIV>,
<&clk IMX8MQ_CLK_MAIN_AXI_SRC>, <&clk IMX8MQ_CLK_25M>,
<&clk IMX8MQ_SYS2_PLL_333M>;
clock-names = "dram_pll", "dram_alt_src", "dram_apb_src", "dram_apb_pre_div",
"dram_core", "dram_alt_root", "sys1_pll_40m", "sys1_pll_400m",
"sys1_pll_100m", "sys1_pll_800m", "noc_div", "ahb_div",
"main_axi_src", "osc_25m", "sys2_pll_333m" ;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
interrupt-name = "irq_busfreq_0", "irq_busfreq_1", "irq_busfreq_2", "irq_busfreq_3";
};
ckil: clk-ckil {
compatible = "fixed-clock";
#clock-cells = <0>;
......@@ -199,12 +167,6 @@
status = "disabled";
};
hdmi_cec: hdmi_cec@32c33800 {
compatible = "fsl,imx8-hdp-cec";
reg = <0x0 0x32c33800 0x0 0x200>;
status = "disabled";
};
mipi_pd: gpc_power_domain@0 {
compatible = "fsl,imx8mq-pm-domain";
#power-domain-cells = <0>;
......@@ -213,6 +175,12 @@
};
hdmi_cec: hdmi_cec@32c33800 {
compatible = "fsl,imx8-hdp-cec";
reg = <0x0 0x32c33800 0x0 0x200>;
status = "disabled";
};
pcie0_pd: gpc_power_domain@1 {
compatible = "fsl,imx8mq-pm-domain";
#power-domain-cells = <0>;
......@@ -538,17 +506,6 @@
status = "disabled";
};
gpt1: gpt@302d0000 {
compatible = "fsl,imx8mq-gpt", "fsl,imx7d-gpt";
reg = <0x0 0x302d0000 0x0 0x10000>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&clk IMX8MQ_CLK_GPT1_ROOT>,
<&clk IMX8MQ_CLK_GPT1_ROOT>,
<&clk IMX8MQ_GPT_3M_CLK>;
clock-names = "ipg", "per", "osc_per";
status = "disabled";
};
irqsteer_dcss: irqsteer@32e2d000 {
compatible = "nxp,imx-irqsteer";
reg = <0x0 0x32e2d000 0x0 0x1000>;
......@@ -610,7 +567,7 @@
assigned-clock-parents = <&clk IMX8MQ_VIDEO_PLL1_OUT>,
<&clk IMX8MQ_SYS1_PLL_800M>,
<&clk IMX8MQ_SYS1_PLL_800M>,
<&clk IMX8MQ_CLK_PHY_27MHZ>;
<&clk IMX8MQ_VIDEO2_PHY_27MHZ>;
assigned-clock-rates = <594000000>,
<800000000>,
<400000000>,
......@@ -795,9 +752,6 @@
reg = <0x30260000 0x10000>;
interrupt = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
little-endian;
/* TODO : check these numbers against
https://source.codeaurora.org/external/imx/linux-imx/commit/?h=rel_imx_4.9.123_2.3.0_8mm_ga&id=5cf347701af6b72a1762fceac1cea6b41a4356a6
*/
fsl,tmu-range = <0xb0000 0xa0026 0x80048 0x70061>;
fsl,tmu-calibration = <0x00000000 0x00000023
0x00000001 0x00000029
......@@ -920,9 +874,8 @@
clocks = <&clk IMX8MQ_CLK_SAI1_IPG>,
<&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_SAI1_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_AUDIO_PLL1_OUT>, <&clk IMX8MQ_AUDIO_PLL2_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 8 24 0>, <&sdma2 9 24 0>;
dma-names = "rx", "tx";
fsl,dataline = <0xff 0xff>;
......@@ -953,9 +906,8 @@
clocks = <&clk IMX8MQ_CLK_SAI5_IPG>,
<&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_CLK_SAI5_ROOT>,
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>,
<&clk IMX8MQ_AUDIO_PLL1_OUT>, <&clk IMX8MQ_AUDIO_PLL2_OUT>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_CLK_DUMMY>;
clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
dmas = <&sdma2 2 24 0>, <&sdma2 3 24 0>;
dma-names = "rx", "tx";
fsl,shared-interrupt;
......@@ -1135,7 +1087,6 @@
clock-names = "ipg", "ahb", "per";
fsl,tuning-start-tap = <20>;
fsl,tuning-step = <2>;
fsl,strobe-dll-delay-target = <5>;
bus-width = <4>;
status = "disabled";
};
......
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment