Commit 1900d532 authored by Ye Li's avatar Ye Li
Browse files

MLK-14382-2 mx6ularm2: Add DTS files for ARM2 boards



Copy the DTS files from kernel for DDR3 ARM2 board and LPDDR2 ARM2 board
preparing for enabling OF_CONTROL.
Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using
DM SPI driver.
Signed-off-by: default avatarYe Li <ye.li@nxp.com>
parent 62c6437a
......@@ -309,7 +309,11 @@ dtb-$(CONFIG_VF610) += vf500-colibri.dtb \
dtb-$(CONFIG_MX53) += imx53-cx9020.dtb
dtb-$(CONFIG_MX6) += imx6ul-14x14-evk.dtb \
dtb-$(CONFIG_MX6) += imx6ul-14x14-ddr3-arm2.dtb \
imx6ul-14x14-ddr3-arm2-emmc.dtb \
imx6ul-14x14-ddr3-arm2-gpmi-weim.dtb \
imx6ul-14x14-lpddr2-arm2.dtb \
imx6ul-14x14-evk.dtb \
imx6ul-14x14-evk-emmc.dtb \
imx6ul-14x14-evk-gpmi-weim.dtb \
imx6ull-14x14-evk.dtb \
......
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "imx6ul-14x14-ddr3-arm2.dts"
&usdhc1 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc1_8bit>;
pinctrl-1 = <&pinctrl_usdhc1_8bit_100mhz>;
pinctrl-2 = <&pinctrl_usdhc1_8bit_200mhz>;
bus-width = <8>;
cd-gpios = <>;
wp-gpios = <>;
vmmc-supply = <>;
tuning-step = <2>;
non-removable;
status = "okay";
};
/*
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include "imx6ul-14x14-ddr3-arm2.dts"
/*
* solve pin conflict with NAND
*
* USDHC2_CD, SD2_RST_B, USDHC2_WP conflict with RAWNAND CE pins , also
* overwritten the conflict of SD2_RST_B with RAWNAND ALE in hog
* QSPI CLK, CE and DATA pins conflict with RAWNAND data pins and CE, CLE, RB,
* WP, DQS pin
*
*/
&iomuxc {
pinctrl-0 = <&pinctrl_hog>;
};
&qspi{
status = "disabled";
};
&gpmi{
status = "okay";
};
&usdhc2 {
status = "disabled";
};
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment