Commits · 0784476992c539dc9ce16b63216aacff20b4eb69 · Eric Kuzmenko / uboot-imx

07 Nov, 2019 7 commits
- Revert "arm: dts: librem5: Drop some unneeded devices" · 07844769
  Angus Ainslie (Purism) authored Nov 07, 2019
```
This reverts commit 27710af5.
```
  07844769
- board: purims: librem5: add tps65892 initialation to u-boot · 8273c5eb
  Angus Ainslie (Purism) authored Nov 07, 2019
```
The tps65982 seems to take about 7 seconds to go from BOOT mode to
APP mode. If it doesn't get to APP mode reset it and wait again.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  8273c5eb
- board: purism: librem5: spl: drop the tps65982 initilization · 2272fe9c
  Angus Ainslie (Purism) authored Nov 07, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  2272fe9c
- board: librem5: Anble Aspen and Birch configuration switches · f693f9b8
  Angus Ainslie (Purism) authored Nov 07, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  f693f9b8
- arm: dts: librem5: Drop some unneeded devices · 27710af5
  Angus Ainslie (Purism) authored Nov 07, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  27710af5
- board: purism: librem5_devkit: fix erroneous FSEL5 references · c40f6056
  Angus Ainslie (Purism) authored Nov 07, 2019
```
These should be the skew bits so the highest is FSEL3
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  c40f6056
- Revert "board: librem5_devkit: Use the correct alternate function" · 9ac4d5f1
  Angus Ainslie (Purism) authored Nov 07, 2019
```
This reverts commit 92f37fe5.
```
  9ac4d5f1
05 Nov, 2019 6 commits

configs: librem5: don't use DM_I2C in SPL · 7423d054
Angus Ainslie (Purism) authored Nov 01, 2019
```
Also initilize the i2c early
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
7423d054
board: librem5: fix compile time unused varibale warning · 61fed8f1
Angus Ainslie (Purism) authored Nov 01, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
61fed8f1

board: librem5: output charger debugging · fe3aec76

Angus Ainslie (Purism) authored Nov 01, 2019



Output the bq25895 charger HW negotiations during boot.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

fe3aec76

board: librem5: add a tps65982 init function · c275c4bd

Angus Ainslie (Purism) authored Nov 01, 2019

For the USB C features to work the tps 65982 needs to start in APP mode.
Check the mode and reset if ENABLE_TPS65982_RESET is defined.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

c275c4bd

board: librem5: configure more pinmuxes · 24e71db4

Angus Ainslie (Purism) authored Nov 01, 2019



Configure more of the pinmues and move the pinmux initialisation to a
function.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

24e71db4

drivers: spi-nor: Add JEDEC id for W25Q16JV · 06895690

Angus Ainslie (Purism) authored Nov 01, 2019



Add a JEDEC id for the Winbond W25Q16JV 16M-BIT serial flash memory with
DUAL/QUAD SPI
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

06895690

01 Nov, 2019 1 commit

mach-imx: i2c-mxv7: be descriptive about which bus failed · 4ee405cb

Angus Ainslie (Purism) authored Nov 01, 2019



When the i2c bus fails to idle be descriptive about which bus failed.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>

4ee405cb

21 Oct, 2019 4 commits
- librem5: add led support · afccd96e
  Angus Ainslie (Purism) authored Oct 21, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  afccd96e
- enable the gpios · ec497ffb
  Angus Ainslie (Purism) authored Oct 16, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  ec497ffb
- librem5_defconfig: store the env in eMMC · 11a4c31c
  Angus Ainslie (Purism) authored Oct 20, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  11a4c31c
- usb : enable the USB interfaces · 687f1a09
  Angus Ainslie (Purism) authored Oct 15, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  687f1a09
16 Oct, 2019 1 commit
- i2c: reconfigure the i2c interfaces for testing · 5820a0e7
  Angus Ainslie (Purism) authored Oct 15, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  5820a0e7
14 Oct, 2019 5 commits
- arm: dts: librem5: add the the SPI bus · 1025e34a
  Angus Ainslie (Purism) authored Oct 14, 2019
```
enable the SPI bus and NOR flash
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  1025e34a
- arm: dts: imx8mq: add the SPI bus · aeb8a692
  Angus Ainslie (Purism) authored Oct 14, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  aeb8a692
- board: purism: librem5: initialize the SPI NOR flash · 6452b5e5
  Angus Ainslie (Purism) authored Oct 14, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  6452b5e5
- librem5_defconfig: enable the SPI NOR flash · 906a4729
  Angus Ainslie (Purism) authored Oct 14, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  906a4729
- imx8mq: clock: Add the ecspi clocks · 805236b3
  Angus Ainslie (Purism) authored Oct 14, 2019
```
Enable the clocks for spi buses 1 through 3
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  805236b3
11 Oct, 2019 3 commits
- board: purism: librem5: spl: Use the correct address for the charge controller · ff15022e
  Angus Ainslie (Purism) authored Oct 10, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  ff15022e
- board: purism: librem5: drop TCPC code · 52ac2a5e
  Angus Ainslie (Purism) authored Oct 10, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  52ac2a5e
- board: purism: librem5: add the phone support files · a19d1625
  Angus Ainslie (Purism) authored Oct 09, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  a19d1625
09 Oct, 2019 5 commits
- configs: librem5_devkit: drop the NAND config · ed2b820a
  Angus Ainslie (Purism) authored Oct 09, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  ed2b820a
- configs: librem5_devkit: Update the board manufacturer name · 55111173
  Angus Ainslie (Purism) authored Oct 09, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  55111173
- board: purism: librem5_devkit: Try some slower clock speeds · 00749f2d
  Angus Ainslie (Purism) authored Oct 09, 2019
```
The devkit is based on the B0 chipset. Try some lower speeds anyway.
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  00749f2d
- board: purism: librem5_devkit: clean up · 7575d46f
  Angus Ainslie authored Oct 09, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  7575d46f
- board: purism: librem5_devkit: enable the TCPC driver · 8bd32768
  Angus Ainslie authored Oct 07, 2019
```
Negotiate 12V on the TCPC port
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  8bd32768
06 Oct, 2019 8 commits
- configs: librem5_devkit: drop NAND support · 93010363
  Angus Ainslie (Purism) authored Oct 06, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  93010363
- configs: librem5_devkit: increase the SPL size · 07f5bd58
  Angus Ainslie (Purism) authored Oct 06, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  07f5bd58
- include: log.h: Make it easier to find where debugging stements come from · e4281a01
  Angus Ainslie (Purism) authored Oct 06, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  e4281a01
- configs: librem5_devkit: enable PMIC device mode · 00601ab9
  Angus Ainslie (Purism)wq authored Oct 06, 2019
```
Signed-off-by: Angus Ainslie (Purism) <angus@akkea.ca>
```
  00601ab9
- spl: spl_fit: Don't append the fdt to the atf · 02f0cd54
  Angus Ainslie authored Oct 06, 2019
```
Appending the fdt causes the boot to fail on the imx8mq
Signed-off-by: Angus Ainslie <angus@akkea.ca>
```
  02f0cd54
- board: librem5_devkit: Use the correct alternate function · 92f37fe5
  Angus Ainslie authored Oct 06, 2019
```
USDHC lines should use alternate function 0
Signed-off-by: Angus Ainslie <angus@akkea.ca>
```
  92f37fe5
- arm: mach-imx: cpu: Senors errors aren't debug · a963c50e
  Angus Ainslie authored Oct 06, 2019
```
Senor data is a printf so senor errors should be too.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
```
  a963c50e
- arm: dts: librem5-devkit: Don't use the Emcraft name for the devkit · 8f807f53
  Angus Ainslie authored Oct 06, 2019
```
Signed-off-by: Angus Ainslie <angus@akkea.ca>
```
  8f807f53