GitLab

Add reva/revb config file.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Update ddr script and add plugin support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Add nand/qspi build configurations for their boot support.
Also Add gpmi-nand and qspi specified DTS files for enable them.

For QSPI, this patch changes it to use DM driver.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>

Add epdc support from v2016.03.
Add a epdc specified DTS file for using epdc
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>

Add FEC2 and convert to use FEC DM driver.
Add board rev check.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Ye Li <ye.li@nxp.com>

Switch to use DM USB. Enable GPIO regulator to handle vbus supply.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Reset ENET_RST_B to make ENET function stable.
Since DM_GPIO enabled, we use "gpio_spi@0_5" which corresponds
to ENET_RST_B.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Enable GPIO/I2C/MMC/SPI/74X164 DM drivers.
Discard mxc spi support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Enable dtb support for mx7dsabresd board.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Let kernel default runs in secure mode.
Signed-off-by: Peng Fan <peng.fan@nxp.com>

Introduce dts files for i.MX 7D SabreSD platform.
From imx_4.1.y, based on "commit b423f954fb755"
Signed-off-by: Peng Fan <peng.fan@nxp.com>

This EPDC/EPXP QoS setting is needed for EPDC stress test to pass.
Signed-off-by: Robby Cai <r63905@freescale.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
(cherry picked from commit 1b32518d1c27f05eb84a4cb93594710354b2e343)

Adjust ahb/axi clock root podf dividers to be divided by 1
to allow ahb/axi clock root to be 24Mhz when sourced
from osc_clk.
Signed-off-by: Adrian Alonso <adrian.alonso@nxp.com>
(cherry picked from commit 9e80234c823d6a2a0d9e10ab4c4c605bf646bd22)

Modify the mx6qarm2 configurations to enable OF_CONTROL and DM drivers:
USB, Ethernet, UART and MMC.

Add two DTS files for imx6q/dl arm2 board and imx6q pop arm2 board.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6sx 14x14/17x17/19x19 lpddr2/ddr3 arm2 board codes and build
configurations to enable OF_CONTROL and DM drivers.

1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor/qspi/nand/eimnor boot support.
5. Add defconfig for using plugin.
6. Enable Ethernet DM driver
7. Update for using QSPI DM driver
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the DTS files from kernel for 14x14/17x17/19x19 ARM2 board for
preparing enabling the OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the board codes and build configurations for i.MX6SX 14x14/17x17/19x19
ARM2 boards from v2016.03 as the base for converting to OF_CONTROL and
DM driver.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6sll lpddr2/3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.

1. Update GPIO codes for adding gpio request
2. Enable USB DM driver
3. Update PMIC code for using DM PMIC
4. Add spinor boot support, pin conflict with LCD, will disable LCD.
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the DTS files from kernel for LPDDR2/3 ARM2 board for preparing enabling
the OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>

Move the mx6sll lpddr2/3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6ull ddr3 arm2 board codes and build configurations
to enable OF_CONTROL and DM drivers.

1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR
7. Add rework support for eMMC/QSPIB/TSC
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the DTS files from kernel for DDR3 ARM2 board for preparing enabling
the OF_CONTROL.
Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using
DM SPI driver.
Signed-off-by: Ye Li <ye.li@nxp.com>

Enable the module disable fuse checking configurations, and ENET fuse checking during
ENET setup.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit d2192a3909be8ab9433082e7c04c917489b28e25)

Add fuse checking for EPDC module. Once the fused is programmed, the
EPDC module is disabled, can't to access it.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit ea7429b70c1eb2cf475028ee8df2ac9ed18b3c82)

Add the modules disable fuses mapping with FDT nodes and devices name.
Signed-off-by: Ye Li <ye.li@nxp.com>
Tested-by: Bai Ping <ping.bai@nxp.com>
(cherry picked from commit d033825f034467fa9c9aeff6fcf95a146c802cf1)

add splash screen feature for epdc.
it's tested on imx6ull arm2 board.
Signed-off-by: Robby Cai <robby.cai@nxp.com>
(cherry picked from commit bcdbe240bb2a97d38ba30dd244a51ece87662b06)

Move the mx6ull ddr3 arm2 board codes and defconfigs from v2016.03
as the base for converting to use DTB OF_CONTROL.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6ul ddr3 arm2 and lpddr2 arm2 boards codes and build configurations
to enable OF_CONTROL and DM drivers.

1. Update QSPI settings and codes for DM QSPI driver.
2. Update GPIO codes for adding gpio request
3. Enable FEC DM driver and update relevant configurations
4. Enable USB DM driver
5. Update PMIC and LDO by-pass codes for DM PMIC
6. Add various boot media support, QSPI/NAND/SPINOR/EIMNOR
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the DTS files from kernel for DDR3 ARM2 board and LPDDR2 ARM2 board
preparing for enabling OF_CONTROL.
Modify the QSPI n25q256a flash node's compatible to "spi-flash" for using
DM SPI driver.
Signed-off-by: Ye Li <ye.li@nxp.com>

Move the mx6ul DDR3/LPDDR2 ARM2 boards codes from v2016.03 u-boot as
the base for OF_CONTROL enabling.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6ulevk board files and build configurations to enable
OF_CONTROL and DM drivers.

1. QSPI settings and codes update for using DM QSPI driver.
   For DM and non-DM driver, the AMBA address is not same.
2. Update configurations for DM i2c driver, using CONFIG_SYS_I2C for non-DM driver
3. GPIO update for adding gpio_request
4. Add FEC DM driver support for two FEC controllers.
5. Enable USB DM driver.
6. Enable 74X164 DM driver for 74LV controlling.
7. Enable PMIC DM driver for 9x9 EVK
Signed-off-by: Ye Li <ye.li@nxp.com>

Update i.MX6ul dtsi file and add mx6ul 14x14 and 9x9 evk DTS file
to latest in kernel.
To support DM QSPI driver, modify the DTS files with adding a spi0
alias for qspi node and changing the the n25q256a flash node's compatible
to "spi-flash"
Signed-off-by: Ye Li <ye.li@nxp.com>

Update i.MX6SLL dtsi file and mx6sll-evk DTS file to latest in kernel.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6slevk board files and build configurations to enable
OF_CONTROL and DM drivers.

1. Update PMIC and LDO-bypass codes for DM PMIC driver.
2. Update configurations for DM i2c driver
3. GPIO update for adding gpio_request
4. Remove duplicated configurations from build config
Signed-off-by: Ye Li <ye.li@nxp.com>

Update i.MX6SL dtsi file and dt-binding header files.
Add the imx6sl-evk DTS file preparing for using DTB.
Signed-off-by: Ye Li <ye.li@nxp.com>

Enable FEC, USB and QSPI DM driver in build configuration and update
board file for them.
Signed-off-by: Ye Li <ye.li@nxp.com>

Copy the imx6sx-sdb latest DTS file from imx_4.1.y kernel.
To support DM QSPI driver, modify the n25q256a flash node's compatible
to "spi-flash".
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6sxsabresd board files and build configurations to enable
OF_CONTROL and DM drivers.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update i.MX6SX dtsi file and relevant DTS header files.
Add the imx6sx-sdb DTS files preparing for using DTB.

To support DM QSPI driver
1. Modify the n25q256a flash node's compatible to "spi-flash".
2. Add spi0 and spi1 alias for qspi1 and qspi2.
Signed-off-by: Ye Li <ye.li@nxp.com>

Update mx6qpsabreauto build configurations to use OF_CONTROL and DM driver.
Also add the imx6qpsabreauto DTS file for using DTB.
Signed-off-by: Ye Li <ye.li@nxp.com>