1. 21 Mar, 2020 1 commit
  2. 12 Nov, 2019 1 commit
  3. 09 Nov, 2019 1 commit
  4. 08 Nov, 2019 1 commit
  5. 07 Nov, 2019 2 commits
  6. 21 Oct, 2019 2 commits
  7. 16 Oct, 2019 1 commit
  8. 14 Oct, 2019 1 commit
  9. 11 Oct, 2019 1 commit
  10. 06 Oct, 2019 1 commit
  11. 02 Oct, 2019 1 commit
  12. 28 Sep, 2019 1 commit
  13. 24 May, 2019 1 commit
  14. 01 Jan, 2019 1 commit
    • Peng Fan's avatar
      imx: add i.MX8MQ EVK support · 86ac7a9a
      Peng Fan authored
      
      
      Add i.MX8MQ EVK support. SPL will initialize ddr and load ddr phy
      firmware. Then loading FIT image, ATF to OCRAM, U-Boot and DTB to
      DRAM.
      
      The boot log with Arm trusted firmware console enabled:
      "
      U-Boot SPL 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
      PMIC:  PFUZE100 ID=0x10
      Normal Boot
      Trying to boot from MMC2
      NOTICE:  Configureing TZASC380
      NOTICE:  BL31: v1.5(release):p9.0.0_1.0.0-beta-20180928-8-ge09c4b62-dirty
      NOTICE:  BL31: Built : 09:28:54, Nov  8 2018
      lpddr4 swffc start
      NOTICE:  sip svc init
      
      U-Boot 2018.11-00142-g9ae14e7274 (Nov 20 2018 - 18:13:16 +0800)
      
      CPU:   Freescale i.MX8MQ rev2.0 at 1000 MHz
      Reset cause: POR
      Model: Freescale i.MX8MQ EVK
      DRAM:  3 GiB
      MMC:   FSL_SDHC: 0, FSL_SDHC: 1
      In:    serial
      Out:   serial
      Err:   serial
      Net:
      Warning: ethernet@30be0000 using MAC address from ROM
      eth0: ethernet@30be0000
      Hit any key to stop autoboot:  0
      "
      Signed-off-by: default avatarPeng Fan <peng.fan@nxp.com>
      Cc: Fabio Estevam <fabio.estevam@nxp.com>
      Cc: Stefano Babic <sbabic@denx.de>
      86ac7a9a