Commit 00cb4739 authored by Jean Delvare's avatar Jean Delvare Committed by Jean Delvare
Browse files

hwmon/smsc47m192: Document the LPC47M292 as supported

The new SMSC LPC47M292 Super-I/O chip includes a hardware monitoring
block which is compatible with those of the LPC47M192.
Signed-off-by: default avatarJean Delvare <>
Cc: Hartmut Rick <>
parent 5b94f675
......@@ -2,12 +2,13 @@ Kernel driver smsc47m192
Supported chips:
* SMSC LPC47M192 and LPC47M997
* SMSC LPC47M192, LPC47M15x, LPC47M292 and LPC47M997
Prefix: 'smsc47m192'
Addresses scanned: I2C 0x2c - 0x2d
Datasheet: The datasheet for LPC47M192 is publicly available from
The LPC47M997 is compatible for hardware monitoring.
The LPC47M15x, LPC47M292 and LPC47M997 are compatible for
hardware monitoring.
Author: Hartmut Rick <>
Special thanks to Jean Delvare for careful checking
......@@ -18,7 +19,7 @@ Description
This driver implements support for the hardware sensor capabilities
of the SMSC LPC47M192 and LPC47M997 Super-I/O chips.
of the SMSC LPC47M192 and compatible Super-I/O chips.
These chips support 3 temperature channels and 8 voltage inputs
as well as CPU voltage VID input.
......@@ -437,7 +437,8 @@ config SENSORS_SMSC47M192
select HWMON_VID
If you say yes here you get support for the temperature and
voltage sensors of the SMSC LPC47M192 and LPC47M997 chips.
voltage sensors of the SMSC LPC47M192, LPC47M15x, LPC47M292
and LPC47M997 chips.
The fan monitoring and control capabilities of these chips
are supported by another driver, select
smsc47m192.c - Support for hardware monitoring block of
SMSC LPC47M192 and LPC47M997 Super I/O chips
SMSC LPC47M192 and compatible Super I/O chips
Copyright (C) 2006 Hartmut Rick <>
......@@ -518,7 +518,7 @@ static int smsc47m192_detect(struct i2c_adapter *adapter, int address,
&& (i2c_smbus_read_byte_data(client,
SMSC47M192_REG_VID4) & 0xfe) == 0x80) {
"found SMSC47M192 or SMSC47M997, "
"found SMSC47M192 or compatible, "
"version 2, stepping A%d\n", version & 0x0f);
} else {
Markdown is supported
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment