Commit 20e6c344 authored by Guido Gunther's avatar Guido Gunther

arm64: dts: imx8mq: Add NWL MIPI DSI controller

Add a node for the Northwest Logic MIPI DSI IP core, "disabled" by
default. This also adds the necessary port to LCDIF.
Signed-off-by: Guido Gunther's avatarGuido Günther <agx@sigxcpu.org>
Reviewed-by: default avatarFabio Estevam <festevam@gmail.com>
Tested-by: Martin Kepplinger's avatarMartin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: default avatarShawn Guo <shawnguo@kernel.org>
parent 3ad4ffc9
......@@ -523,6 +523,12 @@ lcdif: lcd-controller@30320000 {
<&clk IMX8MQ_VIDEO_PLL1_OUT>;
assigned-clock-rates = <0>, <0>, <0>, <594000000>;
status = "disabled";
port@0 {
lcdif_mipi_dsi: endpoint {
remote-endpoint = <&mipi_dsi_lcdif_in>;
};
};
};
iomuxc: pinctrl@30330000 {
......@@ -899,6 +905,49 @@ sec_jr2: jr@3000 {
};
};
mipi_dsi: mipi-dsi@30a00000 {
compatible = "fsl,imx8mq-nwl-dsi";
reg = <0x30a00000 0x300>;
clocks = <&clk IMX8MQ_CLK_DSI_CORE>,
<&clk IMX8MQ_CLK_DSI_AHB>,
<&clk IMX8MQ_CLK_DSI_IPG_DIV>,
<&clk IMX8MQ_CLK_DSI_PHY_REF>,
<&clk IMX8MQ_CLK_LCDIF_PIXEL>;
clock-names = "core", "rx_esc", "tx_esc", "phy_ref", "lcdif";
assigned-clocks = <&clk IMX8MQ_CLK_DSI_AHB>,
<&clk IMX8MQ_CLK_DSI_CORE>,
<&clk IMX8MQ_CLK_DSI_IPG_DIV>;
assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_80M>,
<&clk IMX8MQ_SYS1_PLL_266M>;
assigned-clock-rates = <80000000>, <266000000>, <20000000>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
mux-controls = <&mux 0>;
power-domains = <&pgc_mipi>;
phys = <&dphy>;
phy-names = "dphy";
resets = <&src IMX8MQ_RESET_MIPI_DSI_RESET_BYTE_N>,
<&src IMX8MQ_RESET_MIPI_DSI_DPI_RESET_N>,
<&src IMX8MQ_RESET_MIPI_DSI_ESC_RESET_N>,
<&src IMX8MQ_RESET_MIPI_DSI_PCLK_RESET_N>;
reset-names = "byte", "dpi", "esc", "pclk";
status = "disabled";
ports {
#address-cells = <1>;
#size-cells = <0>;
port@0 {
reg = <0>;
#address-cells = <1>;
#size-cells = <0>;
mipi_dsi_lcdif_in: endpoint@0 {
reg = <0>;
remote-endpoint = <&lcdif_mipi_dsi>;
};
};
};
};
dphy: dphy@30a00300 {
compatible = "fsl,imx8mq-mipi-dphy";
reg = <0x30a00300 0x100>;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment