* NOTE - this is an unmaintained driver. The original author cannot be located.SDL Communications is now SBS Technologies, and does not have anyinformation on these ancient ISA cards on their website.James Nelson <email@example.com> - 12-12-2004 This is the README for RISCom/8 multi-port serial driver (C) 1994-1996 D.Gorodchanin See file LICENSE for terms and conditions.NOTE: English is not my native language. I'm sorry for any mistakes in this text.Misc. notes for RISCom/8 serial driver, in no particular order :)1) This driver can support up to 4 boards at time. Use string "riscom8=0xXXX,0xXXX,0xXXX,0xXXX" at LILO prompt, for setting I/O base addresses for boards. If you compile driver as module use modprobe options "iobase=0xXXX iobase1=0xXXX iobase2=..."2) The driver partially supports famous 'setserial' program, you can use almost any of its options, excluding port & irq settings.3) There are some misc. defines at the beginning of riscom8.c, please read the comments and try to change some of them in case of problems.4) I consider the current state of the driver as BETA.5) SDL Communications WWW page is http://www.sdlcomm.com.6) You can use the MAKEDEV program to create RISCom/8 /dev/ttyL* entries.7) Minor numbers for first board are 0-7, for second 8-15, etc.22 Apr 1996.