This should result in a pretty sizeable performance gain for reads.  For
rough comparison I did some simple read testing using PMEM to compare
reads of write combining (WC) mappings vs write-back (WB).  This was
done on a random lab machine.

PMEM reads from a write combining mapping:
	# dd of=/dev/null if=/dev/pmem0 bs=4096 count=100000
	100000+0 records in
	100000+0 records out
	409600000 bytes (410 MB) copied, 9.2855 s, 44.1 MB/s

PMEM reads from a write-back mapping:
	# dd of=/dev/null if=/dev/pmem0 bs=4096 count=1000000
	1000000+0 records in
	1000000+0 records out
	4096000000 bytes (4.1 GB) copied, 3.44034 s, 1.2 GB/s

To be able to safely support a write-back aperture I needed to add
support for the "read flush" _DSM flag, as outlined in the DSM spec:

http://pmem.io/documents/NVDIMM_DSM_Interface_Example.pdf



This flag tells the ND BLK driver that it needs to flush the cache lines
associated with the aperture after the aperture is moved but before any
new data is read.  This ensures that any stale cache lines from the
previous contents of the aperture will be discarded from the processor
cache, and the new data will be read properly from the DIMM.  We know
that the cache lines are clean and will be discarded without any
writeback because either a) the previous aperture operation was a read,
and we never modified the contents of the aperture, or b) the previous
aperture operation was a write and we must have written back the dirtied
contents of the aperture to the DIMM before the I/O was completed.

In order to add support for the "read flush" flag I needed to add a
generic routine to invalidate cache lines, mmio_flush_range().  This is
protected by the ARCH_HAS_MMIO_FLUSH Kconfig variable, and is currently
only supported on x86.

Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>