Commit 50b215a0 authored by Johannes Stezenbach's avatar Johannes Stezenbach Committed by Linus Torvalds

[PATCH] dvb: DST: reorganize Twinhan DST driver to support CI

- reorganize Twinhan DST driver to support CI
- add support for more cards
(Manu Abraham)
Signed-off-by: default avatarJohannes Stezenbach <js@linuxtv.org>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent daeb6aa4
* For the user
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
NOTE: This document describes the usage of the high level CI API as
in accordance to the Linux DVB API. This is a not a documentation for the,
existing low level CI API.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
To utilize the High Level CI capabilities,
(1*) This point is valid only for the Twinhan/clones
For the Twinhan/Twinhan clones, the dst_ca module handles the CI
hardware handling.This module is loaded automatically if a CI
(Common Interface, that holds the CAM (Conditional Access Module)
is detected.
(2) one requires a userspace application, ca_zap. This small userland
application is in charge of sending the descrambling related information
to the CAM.
This application requires the following to function properly as of now.
(a) Tune to a valid channel, with szap.
eg: $ szap -c channels.conf -r "TMC" -x
(b) a channels.conf containing a valid PMT PID
eg: TMC:11996:h:0:27500:278:512:650:321
here 278 is a valid PMT PID. the rest of the values are the
same ones that szap uses.
(c) after running a szap, you have to run ca_zap, for the
descrambler to function,
eg: $ ca_zap patched_channels.conf "TMC"
The patched means a patch to apply to scan, such that scan can
generate a channels.conf_with pmt, which has this PMT PID info
(NOTE: szap cannot use this channels.conf with the PMT_PID)
(d) Hopeflly Enjoy your favourite subscribed channel as you do with
a FTA card.
(3) Currently ca_zap, and dst_test, both are meant for demonstration
purposes only, they can become full fledged applications if necessary.
* Cards that fall in this category
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
At present the cards that fall in this category are the Twinhan and it's
clones, these cards are available as VVMER, Tomato, Hercules, Orange and
so on.
* CI modules that are supported
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The CI module support is largely dependant upon the firmware on the cards
Some cards do support almost all of the available CI modules. There is
nothing much that can be done in order to make additional CI modules
working with these cards.
Modules that have been tested by this driver at present are
(1) Irdeto 1 and 2 from SCM
(2) Viaccess from SCM
(3) Dragoncam
* The High level CI API
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
* For the programmer
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
With the High Level CI approach any new card with almost any random
architecture can be implemented with this style, the definitions
insidethe switch statement can be easily adapted for any card, thereby
eliminating the need for any additional ioctls.
The disadvantage is that the driver/hardware has to manage the rest. For
the application programmer it would be as simple as sending/receiving an
array to/from the CI ioctls as defined in the Linux DVB API. No changes
have been made in the API to accomodate this feature.
* Why the need for another CI interface ?
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This is one of the most commonly asked question. Well a nice question.
Strictly speaking this is not a new interface.
The CI interface is defined in the DVB API in ca.h as
typedef struct ca_slot_info {
int num; /* slot number */
int type; /* CA interface this slot supports */
#define CA_CI 1 /* CI high level interface */
#define CA_CI_LINK 2 /* CI link layer level interface */
#define CA_CI_PHYS 4 /* CI physical layer level interface */
#define CA_DESCR 8 /* built-in descrambler */
#define CA_SC 128 /* simple smart card interface */
unsigned int flags;
#define CA_CI_MODULE_PRESENT 1 /* module (or card) inserted */
#define CA_CI_MODULE_READY 2
} ca_slot_info_t;
This CI interface follows the CI high level interface, which is not
implemented by most applications. Hence this area is revisited.
This CI interface is quite different in the case that it tries to
accomodate all other CI based devices, that fall into the other categories
This means that this CI interface handles the EN50221 style tags in the
Application layer only and no session management is taken care of by the
application. The driver/hardware will take care of all that.
This interface is purely an EN50221 interface exchanging APDU's. This
means that no session management, link layer or a transport layer do
exist in this case in the application to driver communication. It is
as simple as that. The driver/hardware has to take care of that.
With this High Level CI interface, the interface can be defined with the
regular ioctls.
All these ioctls are also valid for the High level CI interface
#define CA_RESET _IO('o', 128)
#define CA_GET_CAP _IOR('o', 129, ca_caps_t)
#define CA_GET_SLOT_INFO _IOR('o', 130, ca_slot_info_t)
#define CA_GET_DESCR_INFO _IOR('o', 131, ca_descr_info_t)
#define CA_GET_MSG _IOR('o', 132, ca_msg_t)
#define CA_SEND_MSG _IOW('o', 133, ca_msg_t)
#define CA_SET_DESCR _IOW('o', 134, ca_descr_t)
#define CA_SET_PID _IOW('o', 135, ca_pid_t)
On querying the device, the device yields information thus
CA_GET_SLOT_INFO
----------------------------
Command = [info]
APP: Number=[1]
APP: Type=[1]
APP: flags=[1]
APP: CI High level interface
APP: CA/CI Module Present
CA_GET_CAP
----------------------------
Command = [caps]
APP: Slots=[1]
APP: Type=[1]
APP: Descrambler keys=[16]
APP: Type=[1]
CA_SEND_MSG
----------------------------
Descriptors(Program Level)=[ 09 06 06 04 05 50 ff f1]
Found CA descriptor @ program level
(20) ES type=[2] ES pid=[201] ES length =[0 (0x0)]
(25) ES type=[4] ES pid=[301] ES length =[0 (0x0)]
ca_message length is 25 (0x19) bytes
EN50221 CA MSG=[ 9f 80 32 19 03 01 2d d1 f0 08 01 09 06 06 04 05 50 ff f1 02 e0 c9 00 00 04 e1 2d 00 00]
Not all ioctl's are implemented in the driver from the API, the other
features of the hardware that cannot be implemented by the API are achieved
using the CA_GET_MSG and CA_SEND_MSG ioctls. An EN50221 style wrapper is
used to exchange the data to maintain compatibility with other hardware.
/* a message to/from a CI-CAM */
typedef struct ca_msg {
unsigned int index;
unsigned int type;
unsigned int length;
unsigned char msg[256];
} ca_msg_t;
The flow of data can be described thus,
App (User)
-----
parse
|
|
v
en50221 APDU (package)
--------------------------------------
| | | High Level CI driver
| | |
| v |
| en50221 APDU (unpackage) |
| | |
| | |
| v |
| sanity checks |
| | |
| | |
| v |
| do (H/W dep) |
--------------------------------------
| Hardware
|
v
The High Level CI interface uses the EN50221 DVB standard, following a
standard ensures futureproofness.
......@@ -11,9 +11,8 @@ config DVB_BT8XX
the Nebula cards, the Pinnacle PCTV cards, the Twinhan DST cards and
pcHDTV HD2000 cards.
Since these cards have no MPEG decoder onboard, they transmit
Since these cards have no MPEG decoder onboard, they transmit
only compressed MPEG data over the PCI bus, so you need
an external software decoder to watch TV on your computer.
Say Y if you own such a device and want to use it.
obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o
obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o dst_ca.o
EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
......@@ -4,8 +4,8 @@
* Copyright (C) 2002 Peter Hettkamp <peter.hettkamp@t-online.de>
*
* large parts based on the bttv driver
* Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de)
* & Marcus Metzler (mocm@thp.uni-koeln.de)
* Copyright (C) 1996,97,98 Ralph Metzler (rjkm@metzlerbros.de)
* & Marcus Metzler (mocm@metzlerbros.de)
* (c) 1999,2000 Gerd Knorr <kraxel@goldbach.in-berlin.de>
*
* This program is free software; you can redistribute it and/or
......@@ -461,9 +461,9 @@ static int __devinit bt878_probe(struct pci_dev *dev,
pci_set_drvdata(dev, bt);
/* if(init_bt878(btv) < 0) {
bt878_remove(dev);
return -EIO;
}
bt878_remove(dev);
return -EIO;
}
*/
if ((result = bt878_mem_alloc(bt))) {
......@@ -536,10 +536,10 @@ static struct pci_device_id bt878_pci_tbl[] __devinitdata = {
MODULE_DEVICE_TABLE(pci, bt878_pci_tbl);
static struct pci_driver bt878_pci_driver = {
.name = "bt878",
.name = "bt878",
.id_table = bt878_pci_tbl,
.probe = bt878_probe,
.remove = bt878_remove,
.probe = bt878_probe,
.remove = bt878_remove,
};
static int bt878_pci_driver_registered = 0;
......@@ -558,7 +558,7 @@ static int bt878_init_module(void)
(BT878_VERSION_CODE >> 8) & 0xff,
BT878_VERSION_CODE & 0xff);
/*
bt878_check_chipset();
bt878_check_chipset();
*/
/* later we register inside of bt878_find_audio_dma()
* because we may want to ignore certain cards */
......
This diff is collapsed.
/*
Frontend-driver for TwinHan DST Frontend
Copyright (C) 2003 Jamie Honan
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef DST_H
#define DST_H
#include <linux/dvb/frontend.h>
#include <linux/device.h>
#include "bt878.h"
struct dst_config
{
/* the demodulator's i2c address */
u8 demod_address;
};
extern struct dvb_frontend* dst_attach(const struct dst_config* config,
struct i2c_adapter* i2c,
struct bt878 *bt);
#endif // DST_H
This diff is collapsed.
/*
CA-driver for TwinHan DST Frontend/Card
Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _DST_CA_H_
#define _DST_CA_H_
#define RETRIES 5
#define CA_APP_INFO_ENQUIRY 0x9f8020
#define CA_APP_INFO 0x9f8021
#define CA_ENTER_MENU 0x9f8022
#define CA_INFO_ENQUIRY 0x9f8030
#define CA_INFO 0x9f8031
#define CA_PMT 0x9f8032
#define CA_PMT_REPLY 0x9f8033
#define CA_CLOSE_MMI 0x9f8800
#define CA_DISPLAY_CONTROL 0x9f8801
#define CA_DISPLAY_REPLY 0x9f8802
#define CA_TEXT_LAST 0x9f8803
#define CA_TEXT_MORE 0x9f8804
#define CA_KEYPAD_CONTROL 0x9f8805
#define CA_KEYPRESS 0x9f8806
#define CA_ENQUIRY 0x9f8807
#define CA_ANSWER 0x9f8808
#define CA_MENU_LAST 0x9f8809
#define CA_MENU_MORE 0x9f880a
#define CA_MENU_ANSWER 0x9f880b
#define CA_LIST_LAST 0x9f880c
#define CA_LIST_MORE 0x9f880d
struct dst_ca_private {
struct dst_state *dst;
struct dvb_device *dvbdev;
};
#endif
/*
Frontend-driver for TwinHan DST Frontend
Copyright (C) 2003 Jamie Honan
Copyright (C) 2004, 2005 Manu Abraham (manu@kromtek.com)
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef DST_COMMON_H
#define DST_COMMON_H
#include <linux/dvb/frontend.h>
#include <linux/device.h>
#include "bt878.h"
#include "dst_ca.h"
#define NO_DELAY 0
#define LONG_DELAY 1
#define DEVICE_INIT 2
#define DELAY 1
#define DST_TYPE_IS_SAT 0
#define DST_TYPE_IS_TERR 1
#define DST_TYPE_IS_CABLE 2
#define DST_TYPE_IS_ATSC 3
#define DST_TYPE_HAS_NEWTUNE 1
#define DST_TYPE_HAS_TS204 2
#define DST_TYPE_HAS_SYMDIV 4
#define DST_TYPE_HAS_FW_1 8
#define DST_TYPE_HAS_FW_2 16
#define DST_TYPE_HAS_FW_3 32
/* Card capability list */
#define DST_TYPE_HAS_MAC 1
#define DST_TYPE_HAS_DISEQC3 2
#define DST_TYPE_HAS_DISEQC4 4
#define DST_TYPE_HAS_DISEQC5 8
#define DST_TYPE_HAS_MOTO 16
#define DST_TYPE_HAS_CA 32
#define DST_TYPE_HAS_ANALOG 64 /* Analog inputs */
#define RDC_8820_PIO_0_DISABLE 0
#define RDC_8820_PIO_0_ENABLE 1
#define RDC_8820_INT 2
#define RDC_8820_RESET 4
/* DST Communication */
#define GET_REPLY 1
#define NO_REPLY 0
#define GET_ACK 1
#define FIXED_COMM 8
#define ACK 0xff
struct dst_state {
struct i2c_adapter* i2c;
struct bt878* bt;
struct dvb_frontend_ops ops;
/* configuration settings */
const struct dst_config* config;
struct dvb_frontend frontend;
/* private ASIC data */
u8 tx_tuna[10];
u8 rx_tuna[10];
u8 rxbuffer[10];
u8 diseq_flags;
u8 dst_type;
u32 type_flags;
u32 frequency; /* intermediate frequency in kHz for QPSK */
fe_spectral_inversion_t inversion;
u32 symbol_rate; /* symbol rate in Symbols per second */
fe_code_rate_t fec;
fe_sec_voltage_t voltage;
fe_sec_tone_mode_t tone;
u32 decode_freq;
u8 decode_lock;
u16 decode_strength;
u16 decode_snr;
unsigned long cur_jiff;
u8 k22;
fe_bandwidth_t bandwidth;
u8 dst_hw_cap;
u8 dst_fw_version;
fe_sec_mini_cmd_t minicmd;
u8 messages[256];
};
struct dst_types {
char *device_id;
int offset;
u8 dst_type;
u32 type_flags;
u8 dst_feature;
};
struct dst_config
{
/* the ASIC i2c address */
u8 demod_address;
};
int rdc_reset_state(struct dst_state *state);
int rdc_8820_reset(struct dst_state *state);
int dst_wait_dst_ready(struct dst_state *state, u8 delay_mode);
int dst_pio_enable(struct dst_state *state);
int dst_pio_disable(struct dst_state *state);
int dst_error_recovery(struct dst_state* state);
int dst_error_bailout(struct dst_state *state);
int dst_comm_init(struct dst_state* state);
int write_dst(struct dst_state *state, u8 * data, u8 len);
int read_dst(struct dst_state *state, u8 * ret, u8 len);
u8 dst_check_sum(u8 * buf, u32 len);
struct dst_state* dst_attach(struct dst_state* state, struct dvb_adapter *dvb_adapter);
int dst_ca_attach(struct dst_state *state, struct dvb_adapter *dvb_adapter);
int dst_gpio_outb(struct dst_state* state, u32 mask, u32 enbb, u32 outhigh, int delay);
int dst_command(struct dst_state* state, u8 * data, u8 len);
#endif // DST_COMMON_H
......@@ -33,4 +33,3 @@ union dst_gpio_packet {
struct bt878;
int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
......@@ -142,7 +142,7 @@ static int thomson_dtt7579_demod_init(struct dvb_frontend* fe)
mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg));
mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg));
mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
mt352_write(fe, mt352_gpp_ctl_cfg, sizeof(mt352_gpp_ctl_cfg));
mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg));
return 0;
......@@ -161,7 +161,7 @@ static int thomson_dtt7579_pll_set(struct dvb_frontend* fe, struct dvb_frontend_
else if (params->frequency < 771000000) cp = 0xbc;
else cp = 0xf4;
if (params->frequency == 0) bs = 0x03;
if (params->frequency == 0) bs = 0x03;
else if (params->frequency < 443250000) bs = 0x02;
else bs = 0x08;
......@@ -190,44 +190,44 @@ static int cx24108_pll_set(struct dvb_frontend* fe, struct dvb_frontend_paramete
u32 osci[]={950000,1019000,1075000,1178000,1296000,1432000,
1576000,1718000,1856000,2036000,2150000};
1576000,1718000,1856000,2036000,2150000};
u32 bandsel[]={0,0x00020000,0x00040000,0x00100800,0x00101000,
0x00102000,0x00104000,0x00108000,0x00110000,
0x00120000,0x00140000};
0x00102000,0x00104000,0x00108000,0x00110000,
0x00120000,0x00140000};
#define XTAL 1011100 /* Hz, really 1.0111 MHz and a /10 prescaler */
printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
if(freq<950000) freq=950000; /* kHz */
if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
/* compute the pll divider needed, from Conexant data sheet,
resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
depending on the divider bit. It is set to /4 on the 2 lowest
bands */
n=((i<=2?2:1)*freq*10L)/(XTAL/100);
a=n%32; n/=32; if(a==0) n--;
pump=(freq<(osci[i-1]+osci[i])/2);
pll=0xf8000000|
((pump?1:2)<<(14+11))|
((n&0x1ff)<<(5+11))|
((a&0x1f)<<11);
/* everything is shifted left 11 bits to left-align the bits in the
32bit word. Output to the tuner goes MSB-aligned, after all */
printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
cx24110_pll_write(fe,band);
/* set vga and vca to their widest-band settings, as a precaution.
SetSymbolrate might not be called to set this up */
cx24110_pll_write(fe,0x500c0000);
cx24110_pll_write(fe,0x83f1f800);
cx24110_pll_write(fe,pll);
printk("cx24108 debug: entering SetTunerFreq, freq=%d\n",freq);
/* This is really the bit driving the tuner chip cx24108 */
if(freq<950000) freq=950000; /* kHz */
if(freq>2150000) freq=2150000; /* satellite IF is 950..2150MHz */
/* decide which VCO to use for the input frequency */
for(i=1;(i<sizeof(osci)/sizeof(osci[0]))&&(osci[i]<freq);i++);
printk("cx24108 debug: select vco #%d (f=%d)\n",i,freq);
band=bandsel[i];
/* the gain values must be set by SetSymbolrate */
/* compute the pll divider needed, from Conexant data sheet,
resolved for (n*32+a), remember f(vco) is f(receive) *2 or *4,
depending on the divider bit. It is set to /4 on the 2 lowest
bands */
n=((i<=2?2:1)*freq*10L)/(XTAL/100);
a=n%32; n/=32; if(a==0) n--;
pump=(freq<(osci[i-1]+osci[i])/2);
pll=0xf8000000|
((pump?1:2)<<(14+11))|
((n&0x1ff)<<(5+11))|
((a&0x1f)<<11);
/* everything is shifted left 11 bits to left-align the bits in the
32bit word. Output to the tuner goes MSB-aligned, after all */
printk("cx24108 debug: pump=%d, n=%d, a=%d\n",pump,n,a);
cx24110_pll_write(fe,band);
/* set vga and vca to their widest-band settings, as a precaution.
SetSymbolrate might not be called to set this up */
cx24110_pll_write(fe,0x500c0000);
cx24110_pll_write(fe,0x83f1f800);
cx24110_pll_write(fe,pll);
/* writereg(client,0x56,0x7f);*/
return 0;
......@@ -299,7 +299,7 @@ static int advbt771_samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe)
static u8 mt352_reset [] = { 0x50, 0x80 };
static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 };
static u8 mt352_agc_cfg [] = { 0x67, 0x10, 0x23, 0x00, 0xFF, 0xFF,
0x00, 0xFF, 0x00, 0x40, 0x40 };
0x00, 0xFF, 0x00, 0x40, 0x40 };
static u8 mt352_av771_extra[] = { 0xB5, 0x7A };
static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 };
......@@ -463,6 +463,9 @@ static struct nxt6000_config vp3021_alps_tded4_config = {
static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
{
int ret;
struct dst_state* state = NULL;
switch(type) {
#ifdef BTTV_DVICO_DVBT_LITE
case BTTV_DVICO_DVBT_LITE:
......@@ -503,7 +506,25 @@ static void frontend_init(struct dvb_bt8xx_card *card, u32 type)
break;
case BTTV_TWINHAN_DST:
card->fe = dst_attach(&dst_config, card->i2c_adapter, card->bt);
/* DST is not a frontend driver !!! */
state = (struct dst_state *) kmalloc(sizeof (struct dst_state), GFP_KERNEL);
/* Setup the Card */
state->config = &dst_config;
state->i2c = card->i2c_adapter;
state->bt = card->bt;
/* DST is not a frontend, attaching the ASIC */
if ((dst_attach(state, &card->dvb_adapter)) == NULL) {
printk("%s: Could not find a Twinhan DST.\n", __FUNCTION__);
break;
}
card->fe = &state->frontend;
/* Attach other DST peripherals if any */
/* Conditional Access device */
if (state->dst_hw_cap & DST_TYPE_HAS_CA) {
ret = dst_ca_attach(state, &card->dvb_adapter);
}
if (card->fe != NULL) {
break;
}
......@@ -648,7 +669,7 @@ static int dvb_bt8xx_probe(struct device *dev)
case BTTV_PINNACLESAT:
card->gpio_mode = 0x0400c060;
/* should be: BT878_A_GAIN=0,BT878_A_PWRDN,BT878_DA_DPM,BT878_DA_SBR,
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
BT878_DA_IOM=1,BT878_DA_APP to enable serial highspeed mode. */
card->op_sync_orin = 0;
card->irq_err_ignore = 0;
break;
......
......@@ -31,7 +31,7 @@
#include "bttv.h"
#include "mt352.h"
#include "sp887x.h"
#include "dst.h"
#include "dst_common.h"
#include "nxt6000.h"
#include "cx24110.h"
#include "or51211.h"
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment