Commit 6895210e authored by Linus Torvalds's avatar Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc64: Make prom entry spinlock NMI safe.
  sparc64: Kill off old sys_perfctr system call and state.
  sparc: Update defconfigs.
  sparc: Provide io{read,write}{16,32}be().
parents 4c10c937 8a4fd1e4
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Mon Jan 11 23:20:31 2010
# Linux kernel version: 2.6.33
# Wed Mar 3 02:52:23 2010
#
# CONFIG_64BIT is not set
CONFIG_SPARC=y
......@@ -9,6 +9,8 @@ CONFIG_SPARC32=y
# CONFIG_SPARC64 is not set
CONFIG_ARCH_DEFCONFIG="arch/sparc/configs/sparc32_defconfig"
CONFIG_BITS=32
CONFIG_GENERIC_TIME=y
CONFIG_ARCH_USES_GETTIMEOFFSET=y
CONFIG_AUDIT_ARCH=y
CONFIG_MMU=y
CONFIG_HIGHMEM=y
......@@ -48,11 +50,6 @@ CONFIG_RCU_FANOUT=32
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
......@@ -68,6 +65,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -211,7 +209,6 @@ CONFIG_SBUSCHAR=y
CONFIG_PCI=y
CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
......@@ -232,7 +229,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -379,11 +375,13 @@ CONFIG_MISC_DEVICES=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_TI_DAC7512 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT25 is not set
# CONFIG_EEPROM_93CX6 is not set
# CONFIG_CB710_CORE is not set
CONFIG_HAVE_IDE=y
......@@ -507,7 +505,9 @@ CONFIG_SUNQE=m
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
# CONFIG_ETHOC is not set
# CONFIG_GRETH is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
......@@ -521,6 +521,7 @@ CONFIG_SUNQE=m
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
# CONFIG_KS8842 is not set
# CONFIG_KS8851 is not set
# CONFIG_KS8851_MLL is not set
# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
......@@ -563,6 +564,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
......@@ -665,6 +667,7 @@ CONFIG_DEVKMEM=y
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_SUNCORE=y
CONFIG_SERIAL_SUNZILOG=y
CONFIG_SERIAL_SUNZILOG_CONSOLE=y
......@@ -689,7 +692,23 @@ CONFIG_HW_RANDOM=m
# CONFIG_TCG_TPM is not set
CONFIG_DEVPORT=y
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_SPI=y
# CONFIG_SPI_DEBUG is not set
CONFIG_SPI_MASTER=y
#
# SPI Master Controller Drivers
#
CONFIG_SPI_BITBANG=m
CONFIG_SPI_XILINX=m
CONFIG_SPI_XILINX_PLTFM=m
# CONFIG_SPI_DESIGNWARE is not set
#
# SPI Protocol Masters
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
#
# PPS support
......@@ -706,10 +725,13 @@ CONFIG_HWMON=y
#
# Native drivers
#
# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_LM70 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_SIS5595 is not set
......@@ -720,6 +742,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
......@@ -736,6 +759,8 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_MC13783 is not set
# CONFIG_AB4500_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
......@@ -743,6 +768,7 @@ CONFIG_SSB_POSSIBLE=y
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
......@@ -808,6 +834,14 @@ CONFIG_RTC_INTF_DEV=y
#
# SPI RTC drivers
#
# CONFIG_RTC_DRV_M41T94 is not set
# CONFIG_RTC_DRV_DS1305 is not set
# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
......@@ -1180,9 +1214,11 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.33-rc2
# Wed Jan 20 16:31:47 2010
# Linux kernel version: 2.6.33
# Wed Mar 3 02:54:29 2010
#
CONFIG_64BIT=y
CONFIG_SPARC=y
......@@ -55,14 +55,10 @@ CONFIG_TREE_RCU=y
# CONFIG_RCU_TRACE is not set
CONFIG_RCU_FANOUT=64
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=18
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
CONFIG_RT_GROUP_SCHED=y
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
# CONFIG_CGROUPS is not set
# CONFIG_SYSFS_DEPRECATED_V2 is not set
CONFIG_RELAY=y
......@@ -77,6 +73,7 @@ CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
......@@ -105,7 +102,6 @@ CONFIG_PERF_USE_VMALLOC=y
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
CONFIG_EVENT_PROFILE=y
CONFIG_PERF_COUNTERS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
......@@ -266,7 +262,6 @@ CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
# CONFIG_PCI_IOV is not set
......@@ -290,7 +285,6 @@ CONFIG_NET=y
# Networking options
#
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
CONFIG_XFRM=y
CONFIG_XFRM_USER=m
......@@ -425,10 +419,6 @@ CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=m
CONFIG_BLK_DEV_CRYPTOLOOP=m
#
# DRBD disabled because PROC_FS, INET or CONNECTOR not selected
#
# CONFIG_BLK_DEV_DRBD is not set
CONFIG_BLK_DEV_NBD=m
# CONFIG_BLK_DEV_SX8 is not set
......@@ -677,6 +667,7 @@ CONFIG_SUNGEM=m
CONFIG_SUNVNET=m
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ETHOC is not set
# CONFIG_GRETH is not set
# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
......@@ -691,6 +682,7 @@ CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_KSZ884X_PCI is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
# CONFIG_E100 is not set
......@@ -741,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
......@@ -751,6 +744,7 @@ CONFIG_NIU=m
# CONFIG_MLX4_CORE is not set
# CONFIG_TEHUTI is not set
# CONFIG_BNX2X is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
# CONFIG_BE2NET is not set
......@@ -1028,6 +1022,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
......@@ -1076,6 +1071,7 @@ CONFIG_SSB_POSSIBLE=y
# Graphics support
#
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_DRM is not set
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
......@@ -1279,6 +1275,7 @@ CONFIG_SND_ALI5451=m
# CONFIG_SND_YMFPCI is not set
CONFIG_SND_USB=y
# CONFIG_SND_USB_AUDIO is not set
# CONFIG_SND_USB_UA101 is not set
# CONFIG_SND_USB_CAIAQ is not set
CONFIG_SND_SPARC=y
# CONFIG_SND_SUN_AMD7930 is not set
......@@ -1301,6 +1298,7 @@ CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
# CONFIG_HID_3M_PCT is not set
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
......@@ -1317,14 +1315,19 @@ CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
CONFIG_HID_MICROSOFT=y
# CONFIG_HID_MOSART is not set
CONFIG_HID_MONTEREY=y
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_QUANTA is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_STANTUM is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
......@@ -1807,6 +1810,7 @@ CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
......@@ -1904,9 +1908,11 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
......
......@@ -249,10 +249,14 @@ extern void iounmap(volatile void __iomem *addr);
#define ioread8(X) readb(X)
#define ioread16(X) readw(X)
#define ioread16be(X) __raw_readw(X)
#define ioread32(X) readl(X)
#define ioread32be(X) __raw_readl(X)
#define iowrite8(val,X) writeb(val,X)
#define iowrite16(val,X) writew(val,X)
#define iowrite16be(val,X) __raw_writew(val,X)
#define iowrite32(val,X) writel(val,X)
#define iowrite32be(val,X) __raw_writel(val,X)
static inline void ioread8_rep(void __iomem *port, void *buf, unsigned long count)
{
......
......@@ -468,10 +468,14 @@ static inline void iounmap(volatile void __iomem *addr)
#define ioread8(X) readb(X)
#define ioread16(X) readw(X)
#define ioread16be(X) __raw_readw(X)
#define ioread32(X) readl(X)
#define ioread32be(X) __raw_readl(X)
#define iowrite8(val,X) writeb(val,X)
#define iowrite16(val,X) writew(val,X)
#define iowrite16be(val,X) __raw_writew(val,X)
#define iowrite32(val,X) writel(val,X)
#define iowrite32be(val,X) __raw_writel(val,X)
/* Create a virtual mapping cookie for an IO port range */
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
......
......@@ -10,8 +10,8 @@
* from enumeration below. The meaning of further arguments
* are determined by the operation code.
*
* int sys_perfctr(int opcode, unsigned long arg0,
* unsigned long arg1, unsigned long arg2)
* NOTE: This system call is no longer provided, use the perf_events
* infrastructure.
*
* Pointers which are passed by the user are pointers to 64-bit
* integers.
......
......@@ -143,15 +143,7 @@ do { \
* and 2 stores in this critical code path. -DaveM
*/
#define switch_to(prev, next, last) \
do { if (test_thread_flag(TIF_PERFCTR)) { \
unsigned long __tmp; \
read_pcr(__tmp); \
current_thread_info()->pcr_reg = __tmp; \
read_pic(__tmp); \
current_thread_info()->kernel_cntd0 += (unsigned int)(__tmp);\
current_thread_info()->kernel_cntd1 += ((__tmp) >> 32); \
} \
flush_tlb_pending(); \
do { flush_tlb_pending(); \
save_and_clear_fpu(); \
/* If you are tempted to conditionalize the following */ \
/* so that ASI is only written if it changes, think again. */ \
......@@ -197,11 +189,6 @@ do { if (test_thread_flag(TIF_PERFCTR)) { \
"l1", "l2", "l3", "l4", "l5", "l6", "l7", \
"i0", "i1", "i2", "i3", "i4", "i5", \
"o0", "o1", "o2", "o3", "o4", "o5", "o7"); \
/* If you fuck with this, update ret_from_syscall code too. */ \
if (test_thread_flag(TIF_PERFCTR)) { \
write_pcr(current_thread_info()->pcr_reg); \
reset_pic(); \
} \
} while(0)
static inline unsigned long xchg32(__volatile__ unsigned int *m, unsigned int val)
......
......@@ -58,11 +58,6 @@ struct thread_info {
unsigned long gsr[7];
unsigned long xfsr[7];
__u64 __user *user_cntd0;
__u64 __user *user_cntd1;
__u64 kernel_cntd0, kernel_cntd1;
__u64 pcr_reg;
struct restart_block restart_block;
struct pt_regs *kern_una_regs;
......@@ -96,15 +91,10 @@ struct thread_info {
#define TI_RWIN_SPTRS 0x000003c8
#define TI_GSR 0x00000400
#define TI_XFSR 0x00000438
#define TI_USER_CNTD0 0x00000470
#define TI_USER_CNTD1 0x00000478
#define TI_KERN_CNTD0 0x00000480
#define TI_KERN_CNTD1 0x00000488
#define TI_PCR 0x00000490
#define TI_RESTART_BLOCK 0x00000498
#define TI_KUNA_REGS 0x000004c8
#define TI_KUNA_INSN 0x000004d0
#define TI_FPREGS 0x00000500
#define TI_RESTART_BLOCK 0x00000470
#define TI_KUNA_REGS 0x000004a0
#define TI_KUNA_INSN 0x000004a8
#define TI_FPREGS 0x000004c0
/* We embed this in the uppermost byte of thread_info->flags */
#define FAULT_CODE_WRITE 0x01 /* Write access, implies D-TLB */
......@@ -199,7 +189,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
*
* On trap return we need to test several values:
*
* user: need_resched, notify_resume, sigpending, wsaved, perfctr
* user: need_resched, notify_resume, sigpending, wsaved
* kernel: fpdepth
*
* So to check for work in the kernel case we simply load the fpdepth
......@@ -220,7 +210,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
#define TIF_NOTIFY_RESUME 1 /* callback before returning to user */
#define TIF_SIGPENDING 2 /* signal pending */
#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
#define TIF_PERFCTR 4 /* performance counters active */
/* flag bit 4 is available */
#define TIF_UNALIGNED 5 /* allowed to do unaligned accesses */
/* flag bit 6 is available */
#define TIF_32BIT 7 /* 32-bit binary */
......@@ -241,7 +231,6 @@ register struct thread_info *current_thread_info_reg asm("g6");
#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME)
#define _TIF_SIGPENDING (1<<TIF_SIGPENDING)
#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED)
#define _TIF_PERFCTR (1<<TIF_PERFCTR)
#define _TIF_UNALIGNED (1<<TIF_UNALIGNED)
#define _TIF_32BIT (1<<TIF_32BIT)
#define _TIF_SECCOMP (1<<TIF_SECCOMP)
......@@ -252,7 +241,7 @@ register struct thread_info *current_thread_info_reg asm("g6");
#define _TIF_USER_WORK_MASK ((0xff << TI_FLAG_WSAVED_SHIFT) | \
_TIF_DO_NOTIFY_RESUME_MASK | \
_TIF_NEED_RESCHED | _TIF_PERFCTR)
_TIF_NEED_RESCHED)
#define _TIF_DO_NOTIFY_RESUME_MASK (_TIF_NOTIFY_RESUME | _TIF_SIGPENDING)
/*
......
......@@ -48,7 +48,6 @@ extern void __init boot_cpu_id_too_large(int cpu);
extern unsigned int dcache_parity_tl1_occurred;
extern unsigned int icache_parity_tl1_occurred;
extern asmlinkage void update_perfctrs(void);
extern asmlinkage void sparc_breakpoint(struct pt_regs *regs);
extern void timer_interrupt(int irq, struct pt_regs *regs);
......
......@@ -352,12 +352,6 @@ void exit_thread(void)
else
t->utraps[0]--;
}
if (test_and_clear_thread_flag(TIF_PERFCTR)) {
t->user_cntd0 = t->user_cntd1 = NULL;
t->pcr_reg = 0;
write_pcr(0);
}
}
void flush_thread(void)
......@@ -371,13 +365,6 @@ void flush_thread(void)
set_thread_wsaved(0);
/* Turn off performance counters if on. */
if (test_and_clear_thread_flag(TIF_PERFCTR)) {
t->user_cntd0 = t->user_cntd1 = NULL;
t->pcr_reg = 0;
write_pcr(0);
}
/* Clear FPU register state. */
t->fpsaved[0] = 0;
......@@ -591,16 +578,6 @@ int copy_thread(unsigned long clone_flags, unsigned long sp,
t->kregs->u_regs[UREG_FP] =
((unsigned long) child_sf) - STACK_BIAS;
/* Special case, if we are spawning a kernel thread from
* a userspace task (usermode helper, NFS or similar), we
* must disable performance counters in the child because
* the address space and protection realm are changing.
*/
if (t->flags & _TIF_PERFCTR) {
t->user_cntd0 = t->user_cntd1 = NULL;
t->pcr_reg = 0;
t->flags &= ~_TIF_PERFCTR;
}
t->flags |= ((long)ASI_P << TI_FLAG_CURRENT_DS_SHIFT);
t->kregs->u_regs[UREG_G6] = (unsigned long) t;
t->kregs->u_regs[UREG_G4] = (unsigned long) t->task;
......
......@@ -65,48 +65,6 @@ __handle_user_windows:
ba,pt %xcc, __handle_user_windows_continue
andn %l1, %l4, %l1
__handle_perfctrs:
call update_perfctrs
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldub [%g6 + TI_WSAVED], %o2
brz,pt %o2, 1f
nop
/* Redo userwin+sched+sig checks */
call fault_in_user_windows
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
andcc %l0, _TIF_NEED_RESCHED, %g0
be,pt %xcc, 1f
nop
call schedule
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
ldx [%g6 + TI_FLAGS], %l0
1: andcc %l0, _TIF_DO_NOTIFY_RESUME_MASK, %g0
be,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
mov %l5, %o1
add %sp, PTREGS_OFF, %o0
mov %l0, %o2
call do_notify_resume
wrpr %g0, RTRAP_PSTATE, %pstate
wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
/* Signal delivery can modify pt_regs tstate, so we must
* reload it.
*/
ldx [%sp + PTREGS_OFF + PT_V9_TSTATE], %l1
sethi %hi(0xf << 20), %l4
and %l1, %l4, %l4
andn %l1, %l4, %l1
ba,pt %xcc, __handle_perfctrs_continue
sethi %hi(TSTATE_PEF), %o0
__handle_userfpu:
rd %fprs, %l5
andcc %l5, FPRS_FEF, %g0
......@@ -191,9 +149,9 @@ rtrap_no_irq_enable:
* take until the next local IRQ before the signal/resched
* event would be handled.
*
* This also means that if we have to deal with performance
* counters or user windows, we have to redo all of these
* sched+signal checks with IRQs disabled.
* This also means that if we have to deal with user
* windows, we have to redo all of these sched+signal checks
* with IRQs disabled.
*/
to_user: wrpr %g0, RTRAP_PSTATE_IRQOFF, %pstate
wrpr 0, %pil
......@@ -214,12 +172,8 @@ __handle_signal_continue:
brnz,pn %o2, __handle_user_windows
nop
__handle_user_windows_continue:
ldx [%g6 + TI_FLAGS], %l5
andcc %l5, _TIF_PERFCTR, %g0
sethi %hi(TSTATE_PEF), %o0
bne,pn %xcc, __handle_perfctrs
__handle_perfctrs_continue:
andcc %l1, %o0, %g0
andcc %l1, %o0, %g0
/* This fpdepth clear is necessary for non-syscall rtraps only */
user_nowork:
......
......@@ -51,7 +51,6 @@ SIGN1(sys32_exit_group, sys_exit_group, %o0)
SIGN1(sys32_wait4, compat_sys_wait4, %o2)
SIGN1(sys32_creat, sys_creat, %o1)
SIGN1(sys32_mknod, sys_mknod, %o1)
SIGN1(sys32_perfctr, sys_perfctr, %o0)
SIGN1(sys32_umount, sys_umount, %o1)
SIGN1(sys32_signal, sys_signal, %o0)
SIGN1(sys32_access, sys_access, %o1)
......
......@@ -27,7 +27,6 @@
#include <asm/uaccess.h>
#include <asm/utrap.h>
#include <asm/perfctr.h>
#include <asm/unistd.h>
#include "entry.h"
......@@ -766,109 +765,6 @@ SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act,
return ret;
}
/* Invoked by rtrap code to update performance counters in
* user space.
*/
asmlinkage void update_perfctrs(void)
{
unsigned long pic, tmp;
read_pic(pic);
tmp = (current_thread_info()->kernel_cntd0 += (unsigned int)pic);
__put_user(tmp, current_thread_info()->user_cntd0);
tmp = (current_thread_info()->kernel_cntd1 += (pic >> 32));
__put_user(tmp, current_thread_info()->user_cntd1);
reset_pic();
}
SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0,
unsigned long, arg1, unsigned long, arg2)
{
int err = 0;
switch(opcode) {
case PERFCTR_ON:
current_thread_info()->pcr_reg = arg2;
current_thread_info()->user_cntd0 = (u64 __user *) arg0;
current_thread_info()->user_cntd1 = (u64 __user *) arg1;
current_thread_info()->kernel_cntd0 =
current_thread_info()->kernel_cntd1 = 0;
write_pcr(arg2);
reset_pic();
set_thread_flag(TIF_PERFCTR);
break;
case PERFCTR_OFF:
err = -EINVAL;
if (test_thread_flag(TIF_PERFCTR)) {
current_thread_info()->user_cntd0 =
current_thread_info()->user_cntd1 = NULL;
current_thread_info()->pcr_reg = 0;
write_pcr(0);
clear_thread_flag(TIF_PERFCTR);
err = 0;
}
break;
case PERFCTR_READ: {
unsigned long pic, tmp;
if (!test_thread_flag(TIF_PERFCTR)) {
err = -EINVAL;
break;
}
read_pic(pic);
tmp = (current_thread_info()->kernel_cntd0 += (unsigned int)pic);
err |= __put_user(tmp, current_thread_info()->user_cntd0);
tmp = (current_thread_info()->kernel_cntd1 += (pic >> 32));
err |= __put_user(tmp, current_thread_info()->user_cntd1);
reset_pic();
break;
}
case PERFCTR_CLRPIC:
if (!test_thread_flag(TIF_PERFCTR)) {
err = -EINVAL;
break;
}
current_thread_info()->kernel_cntd0 =
current_thread_info()->kernel_cntd1 = 0;
reset_pic();
break;
case PERFCTR_SETPCR: {
u64 __user *user_pcr = (u64 __user *)arg0;
if (!test_thread_flag(TIF_PERFCTR)) {
err = -EINVAL;
break;
}
err |= __get_user(current_thread_info()->pcr_reg, user_pcr);
write_pcr(current_thread_info()->pcr_reg);
current_thread_info()->kernel_cntd0 =
current_thread_info()->kernel_cntd1 = 0;
reset_pic();
break;
}
case PERFCTR_GETPCR: {
u64 __user *user_pcr = (u64 __user *)arg0;
if (!test_thread_flag(TIF_PERFCTR)) {
err = -EINVAL;
break;
}
err |= __put_user(current_thread_info()->pcr_reg, user_pcr);
break;
}
default:
err = -EINVAL;
break;
};
return err;
}
/*
* Do a system call from kernel instead of calling sys_execve so we
* end up with proper pt_regs.
......
......@@ -110,31 +110,12 @@ sys_clone:
.globl ret_from_syscall
ret_from_syscall:
/* Clear current_thread_info()->new_child, and
* check performance counter stuff too.
*/
/* Clear current_thread_info()->new_child. */
stb %g0, [%g6 + TI_NEW_CHILD]
ldx [%g6 + TI_FLAGS], %l0
call schedule_tail
mov %g7, %o0
andcc %l0, _TIF_PERFCTR, %g0
be,pt %icc, 1f
nop
ldx [%g6 + TI_PCR], %o7
wr %g0, %o7, %pcr