Commit a8c4c20d authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm

* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (44 commits)
  [ARM] 3541/2: workaround for PXA27x erratum E7
  [ARM] nommu: provide a way for correct control register value selection
  [ARM] 3705/1: add supersection support to ioremap()
  [ARM] 3707/1: iwmmxt: use the generic thread notifier infrastructure
  [ARM] 3706/2: ep93xx: add cirrus logic edb9315a support
  [ARM] 3704/1: format IOP Kconfig with tabs, create more consistency
  [ARM] 3703/1: Add help description for ARCH_EP80219
  [ARM] 3678/1: MMC: Make OMAP MMC work
  [ARM] 3677/1: OMAP: Update H2 defconfig
  [ARM] 3676/1: ARM: OMAP: Fix dmtimers and timer32k to compile on OMAP1
  [ARM] Add section support to ioremap
  [ARM] Fix sa11x0 SDRAM selection
  [ARM] Set bit 4 on section mappings correctly depending on CPU
  [ARM] 3666/1: TRIZEPS4 [1/5] core
  ARM: OMAP: Multiplexing for 24xx GPMC wait pin monitoring
  ARM: OMAP: Fix SRAM to use MT_MEMORY instead of MT_DEVICE
  ARM: OMAP: Update dmtimers
  ARM: OMAP: Make clock variables static
  ARM: OMAP: Fix GPMC compilation when DEBUG is defined
  ARM: OMAP: Mux updates for external DMA and GPIO
  ...
parents 168d04b3 2dc7667b
......@@ -121,11 +121,11 @@ config ARCH_VERSATILE
help
This enables support for ARM Ltd Versatile board.
config ARCH_AT91RM9200
bool "Atmel AT91RM9200"
config ARCH_AT91
bool "Atmel AT91"
help
Say Y here if you intend to run this kernel on an Atmel
AT91RM9200-based board.
This enables support for systems based on the Atmel AT91RM9200
and AT91SAM9xxx processors.
config ARCH_CLPS7500
bool "Cirrus CL-PS7500FE"
......@@ -547,7 +547,7 @@ config LEDS
ARCH_LUBBOCK || MACH_MAINSTONE || ARCH_NETWINDER || \
ARCH_OMAP || ARCH_P720T || ARCH_PXA_IDP || \
ARCH_SA1100 || ARCH_SHARK || ARCH_VERSATILE || \
ARCH_AT91RM9200
ARCH_AT91RM9200 || MACH_TRIZEPS4
help
If you say Y here, the LEDs on your machine will be used
to provide useful information about your current system status.
......@@ -678,7 +678,7 @@ config XIP_PHYS_ADDR
endmenu
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP1)
if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP)
menu "CPU Frequency scaling"
......
......@@ -114,7 +114,7 @@ endif
machine-$(CONFIG_ARCH_H720X) := h720x
machine-$(CONFIG_ARCH_AAEC2000) := aaec2000
machine-$(CONFIG_ARCH_REALVIEW) := realview
machine-$(CONFIG_ARCH_AT91RM9200) := at91rm9200
machine-$(CONFIG_ARCH_AT91) := at91rm9200
machine-$(CONFIG_ARCH_EP93XX) := ep93xx
machine-$(CONFIG_ARCH_PNX4008) := pnx4008
machine-$(CONFIG_ARCH_NETX) := netx
......
......@@ -447,8 +447,11 @@ __common_mmu_cache_on:
mov r1, #-1
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
mcr p15, 0, r0, c1, c0, 0 @ load control register
mov pc, lr
b 1f
.align 5 @ cache line aligned
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
sub pc, lr, r0, lsr #32 @ properly flush pipeline
/*
* All code following this line is relocatable. It is relocated by
......
......@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -82,6 +82,7 @@ CONFIG_OBSOLETE_MODPARM=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -103,6 +103,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -105,6 +105,7 @@ CONFIG_DEFAULT_IOSCHED="deadline"
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
......@@ -80,6 +80,7 @@ CONFIG_KMOD=y
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
#
......
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.14
# Wed Nov 9 18:53:40 2005
# Linux kernel version: 2.6.17
# Thu Jun 29 15:25:18 2006
#
CONFIG_ARM=y
CONFIG_MMU=y
CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_LOCK_KERNEL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
......@@ -29,26 +30,26 @@ CONFIG_SYSVIPC=y
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set
# CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set
# CONFIG_RELAY is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_UID16=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
# CONFIG_EMBEDDED is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
CONFIG_SLAB=y
# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
# CONFIG_SLOB is not set
#
# Loadable module support
......@@ -56,7 +57,6 @@ CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
CONFIG_OBSOLETE_MODPARM=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_KMOD is not set
......@@ -64,6 +64,7 @@ CONFIG_OBSOLETE_MODPARM=y
#
# Block layer
#
# CONFIG_BLK_DEV_IO_TRACE is not set
#
# IO Schedulers
......@@ -81,16 +82,26 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# System Type
#
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91RM9200 is not set
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_IOP3XX is not set
# CONFIG_ARCH_IXP4XX is not set
# CONFIG_ARCH_IXP2000 is not set
# CONFIG_ARCH_IXP23XX is not set
# CONFIG_ARCH_L7200 is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
......@@ -98,11 +109,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_OMAP=y
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_IMX is not set
# CONFIG_ARCH_H720X is not set
# CONFIG_ARCH_AAEC2000 is not set
#
# TI OMAP Implementations
......@@ -141,6 +147,7 @@ CONFIG_ARCH_OMAP16XX=y
CONFIG_MACH_OMAP_H2=y
# CONFIG_MACH_OMAP_H3 is not set
# CONFIG_MACH_OMAP_OSK is not set
# CONFIG_MACH_NOKIA770 is not set
# CONFIG_MACH_OMAP_GENERIC is not set
#
......@@ -177,7 +184,6 @@ CONFIG_ARM_THUMB=y
#
# Bus support
#
CONFIG_ISA_DMA_API=y
#
# PCCARD (PCMCIA/CardBus) support
......@@ -189,6 +195,8 @@ CONFIG_ISA_DMA_API=y
#
CONFIG_PREEMPT=y
CONFIG_NO_IDLE_HZ=y
CONFIG_HZ=128
# CONFIG_AEABI is not set
# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
......@@ -249,6 +257,8 @@ CONFIG_BINFMT_AOUT=y
# Power management options
#
CONFIG_PM=y
CONFIG_PM_LEGACY=y
# CONFIG_PM_DEBUG is not set
# CONFIG_APM is not set
#
......@@ -259,9 +269,12 @@ CONFIG_NET=y
#
# Networking options
#
# CONFIG_NETDEBUG is not set
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
......@@ -278,12 +291,18 @@ CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_BIC=y
# CONFIG_IPV6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
#
......@@ -295,6 +314,11 @@ CONFIG_TCP_CONG_BIC=y
# SCTP Configuration (EXPERIMENTAL)
#
# CONFIG_IP_SCTP is not set
#
# TIPC Configuration (EXPERIMENTAL)
#
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_VLAN_8021Q is not set
......@@ -312,7 +336,6 @@ CONFIG_TCP_CONG_BIC=y
# QoS and/or fair queueing
#
# CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
#
# Network testing
......@@ -333,6 +356,12 @@ CONFIG_TCP_CONG_BIC=y
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# CONFIG_SYS_HYPERVISOR is not set
#
# Connector - unified userspace <-> kernelspace linker
#
# CONFIG_CONNECTOR is not set
#
# Memory Technology Devices (MTD)
......@@ -526,6 +555,7 @@ CONFIG_SERIO_SERPORT=y
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
# CONFIG_SERIAL_NONSTANDARD is not set
#
......@@ -534,6 +564,7 @@ CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
......@@ -559,8 +590,8 @@ CONFIG_WATCHDOG_NOWAYOUT=y
# Watchdog Device Drivers
#
# CONFIG_SOFT_WATCHDOG is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_DTLK is not set
# CONFIG_R3964 is not set
......@@ -572,6 +603,7 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# TPM devices
#
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
#
......@@ -579,11 +611,23 @@ CONFIG_WATCHDOG_NOWAYOUT=y
#
# CONFIG_I2C is not set
#
# SPI support
#
# CONFIG_SPI is not set
# CONFIG_SPI_MASTER is not set
#
# Dallas's 1-wire bus
#
#
# Hardware Monitoring support
#
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
......@@ -591,13 +635,23 @@ CONFIG_HWMON=y
#
#
# Multimedia Capabilities Port drivers
# LED devices
#
# CONFIG_NEW_LEDS is not set
#
# LED drivers
#
#
# LED Triggers
#
#
# Multimedia devices
#
# CONFIG_VIDEO_DEV is not set
CONFIG_VIDEO_V4L2=y
#
# Digital Video Broadcasting Devices
......@@ -607,11 +661,13 @@ CONFIG_HWMON=y
#
# Graphics support
#
CONFIG_FIRMWARE_EDID=y
CONFIG_FB=y
# CONFIG_FB_CFB_FILLRECT is not set
# CONFIG_FB_CFB_COPYAREA is not set
# CONFIG_FB_CFB_IMAGEBLIT is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
# CONFIG_FB_S1D13XXX is not set
......@@ -635,7 +691,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_FONT_RL is not set
#
# Logo configuration
......@@ -660,16 +715,15 @@ CONFIG_SOUND=y
# Open Sound System
#
CONFIG_SOUND_PRIME=y
# CONFIG_OBSOLETE_OSS_DRIVER is not set
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
# CONFIG_SOUND_OSS is not set
#
# USB support
#
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
# CONFIG_USB_ARCH_HAS_EHCI is not set
# CONFIG_USB is not set
#
......@@ -680,23 +734,18 @@ CONFIG_USB_ARCH_HAS_OHCI=y
# USB Gadget Support
#
# CONFIG_USB_GADGET is not set
# CONFIG_USB_GADGET_NET2280 is not set
# CONFIG_USB_GADGET_PXA2XX is not set
# CONFIG_USB_GADGET_GOKU is not set
# CONFIG_USB_GADGET_LH7A40X is not set
# CONFIG_USB_GADGET_OMAP is not set
# CONFIG_USB_GADGET_DUMMY_HCD is not set
# CONFIG_USB_ZERO is not set
# CONFIG_USB_ETH is not set
# CONFIG_USB_GADGETFS is not set
# CONFIG_USB_FILE_STORAGE is not set
# CONFIG_USB_G_SERIAL is not set
#
# MMC/SD Card support
#
# CONFIG_MMC is not set
#
# Real Time Clock
#
CONFIG_RTC_LIB=y
# CONFIG_RTC_CLASS is not set
#
# File systems
#
......@@ -704,14 +753,15 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_MINIX_FS is not set
CONFIG_ROMFS_FS=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set
......@@ -741,7 +791,7 @@ CONFIG_SYSFS=y
# CONFIG_TMPFS is not set
# CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y
# CONFIG_RELAYFS_FS is not set
# CONFIG_CONFIGFS_FS is not set
#
# Miscellaneous filesystems
......@@ -843,10 +893,13 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_DEBUG_KERNEL is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_FS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_UNWIND_INFO is not set
# CONFIG_DEBUG_USER is not set
#
......
......@@ -85,6 +85,7 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
CONFIG_ARCH_AT91=y
CONFIG_ARCH_AT91RM9200=y
# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
......
This diff is collapsed.
......@@ -25,7 +25,7 @@ obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o
obj-$(CONFIG_CRUNCH) += crunch.o crunch-bits.o
AFLAGS_crunch-bits.o := -Wa,-mcpu=ep9312
obj-$(CONFIG_IWMMXT) += iwmmxt.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o iwmmxt-notifier.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
ifneq ($(CONFIG_ARCH_EBSA110),y)
......
......@@ -105,6 +105,7 @@ int main(void)
BLANK();
DEFINE(PROC_INFO_SZ, sizeof(struct proc_info_list));
DEFINE(PROCINFO_INITFUNC, offsetof(struct proc_info_list, __cpu_flush));
DEFINE(PROCINFO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mmu_flags));
DEFINE(PROCINFO_MM_MMUFLAGS, offsetof(struct proc_info_list, __cpu_mm_mmu_flags));
DEFINE(PROCINFO_IO_MMUFLAGS, offsetof(struct proc_info_list, __cpu_io_mmu_flags));
return 0;
}
......@@ -589,9 +589,7 @@ ENTRY(__switch_to)
#ifdef CONFIG_MMU
mcr p15, 0, r6, c3, c0, 0 @ Set domain register
#endif
#if defined(CONFIG_IWMMXT)
bl iwmmxt_task_switch
#elif defined(CONFIG_CPU_XSCALE)
#if defined(CONFIG_CPU_XSCALE) && !defined(CONFIG_IWMMXT)
add r4, r2, #TI_CPU_DOMAIN + 40 @ cpu_context_save->extra
ldmib r4, {r4, r5}
mar acc0, r4, r5
......
......@@ -220,7 +220,7 @@ __create_page_tables:
teq r0, r6
bne 1b
ldr r7, [r10, #PROCINFO_MMUFLAGS] @ mmuflags
ldr r7, [r10, #PROCINFO_MM_MMUFLAGS] @ mm_mmuflags
/*
* Create identity mapping for first MB of kernel to
......@@ -271,8 +271,7 @@ __create_page_tables:
#endif
#ifdef CONFIG_DEBUG_LL
bic r7, r7, #0x0c @ turn off cacheable
@ and bufferable bits
ldr r7, [r10, #PROCINFO_IO_MMUFLAGS] @ io_mmuflags
/*
* Map in IO space for serial debugging.
* This allows debug messages to be output
......
/*
* linux/arch/arm/kernel/iwmmxt-notifier.c
*
* XScale iWMMXt (Concan) context switching and handling
*
* Initial code:
* Copyright (c) 2003, Intel Corporation
*
* Full lazy switching support, optimizations and more, by Nicolas Pitre
* Copyright (c) 2003-2004, MontaVista Software, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/init.h>
#include <asm/thread_notify.h>
#include <asm/io.h>
static int iwmmxt_do(struct notifier_block *self, unsigned long cmd, void *t)
{
struct thread_info *thread = t;
switch (cmd) {
case THREAD_NOTIFY_FLUSH:
/*
* flush_thread() zeroes thread->fpstate, so no need
* to do anything here.
*
* FALLTHROUGH: Ensure we don't try to overwrite our newly
* initialised state information on the first fault.
*/
case THREAD_NOTIFY_RELEASE:
iwmmxt_task_release(thread);
break;
case THREAD_NOTIFY_SWITCH:
iwmmxt_task_switch(thread);
break;
}
return NOTIFY_DONE;
}
static struct notifier_block iwmmxt_notifier_block = {
.notifier_call = iwmmxt_do,
};
static int __init iwmmxt_init(void)
{
thread_register_notifier(&iwmmxt_notifier_block);
return 0;
}
late_initcall(iwmmxt_init);
......@@ -271,30 +271,27 @@ ENTRY(iwmmxt_task_restore)
/*
* Concan handling on task switch
*
* r0 = previous task_struct pointer (must be preserved)
* r1 = previous thread_info pointer
* r2 = next thread_info pointer (must be preserved)
* r0 = next thread_info pointer
*
* Called only from __switch_to with task preemption disabled.
* No need to care about preserving r4 and above.
* Called only from the iwmmxt notifier with task preemption disabled.
*/
ENTRY(iwmmxt_task_switch)
mrc p15, 0, r4, c15, c1, 0
tst r4, #0x3 @ CP0 and CP1 accessible?
mrc p15, 0, r1, c15, c1, 0
tst r1, #0x3 @ CP0 and CP1 accessible?
bne 1f @ yes: block them for next task
ldr r5, =concan_owner
add r6, r2, #TI_IWMMXT_STATE @ get next task Concan save area
ldr r5, [r5] @ get current Concan owner
teq r5, r6 @ next task owns it?
ldr r2, =concan_owner
add r3, r0, #TI_IWMMXT_STATE @ get next task Concan save area
ldr r2, [r2] @ get current Concan owner
teq r2, r3 @ next task owns it?
movne pc, lr @ no: leave Concan disabled
1: eor r4, r4, #3 @ flip Concan access
mcr p15, 0, r4, c15, c1, 0
1: eor r1, r1, #3 @ flip Concan access
mcr p15, 0, r1, c15, c1, 0
mrc p15, 0, r4, c2, c0, 0
sub pc, lr, r4, lsr #32 @ cpwait and return
mrc p15, 0, r1, c2, c0, 0
sub pc, lr, r1, lsr #32 @ cpwait and return
/*
* Remove Concan ownership of given task
......
......@@ -352,9 +352,6 @@ void flush_thread(void)
memset(&thread->fpstate, 0, sizeof(union fp_state));
thread_notify(THREAD_NOTIFY_FLUSH, thread);
#if defined(CONFIG_IWMMXT)
iwmmxt_task_release(thread);
#endif
}
void release_thread(struct task_struct *dead_task)
......@@ -362,9 +359,6 @@ void release_thread(struct task_struct *dead_task)
struct thread_info *thread = task_thread_info(dead_task);
thread_notify(THREAD_NOTIFY_RELEASE, thread);
#if defined(CONFIG_IWMMXT)
iwmmxt_task_release(thread);
#endif
}
asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
......
......@@ -344,9 +344,9 @@ static void __init setup_processor(void)
cpu_cache = *list->cache;
#endif
printk("CPU: %s [%08x] revision %d (ARMv%s)\n",
printk("CPU: %s [%08x] revision %d (ARMv%s), cr=%08x\n",
cpu_name, processor_id, (int)processor_id & 15,
proc_arch[cpu_architecture()]);
proc_arch[cpu_architecture()], cr_alignment);
sprintf(system_utsname.machine, "%s%c", list->arch_name, ENDIANNESS);
sprintf(elf_platform, "%s%c", list->elf_name, ENDIANNESS);
......
if ARCH_AT91RM9200
if ARCH_AT91
menu "Atmel AT91 System-on-Chip"
comment "Atmel AT91 Processors"
config ARCH_AT91RM9200
bool "AT91RM9200"