iio: imu: st_lsm6dsx: make IIO_CHAN_INFO_SCALE shared by type

in_accel_x_scale, in_accel_y_scale and in_accel_z_scale are always
the same. The scale is still defined to be in "info_mask_seperate".

Userspace (iio-sensor-proxy and others) is not used to that and only
looks for "in_accel_scale" for the scaling factor to apply.

Change IIO_CHAN_INFO_SCALE from being seperate in all channel to be
shared by type.

This removes in_accel_x_scale, in_accel_y_scale and in_accel_z_scale and
makes available in_accel_scale.
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>

drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h

@@ -58,8 +58,8 @@ enum st_lsm6dsx_hw_id {
 	.address = addr,						\
 	.modified = 1,							\
 	.channel2 = mod,						\
-	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |			\
-			      BIT(IIO_CHAN_INFO_SCALE),			\
+	.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),			\
+	.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),		\
 	.info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),	\
 	.scan_index = scan_idx,						\
 	.scan_type = {							\