control-in

Source: qemu
Section: otherosfs
Priority: optional
:debian:Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
:ubuntu:Maintainer: Ubuntu Developers <ubuntu-devel-discuss@lists.ubuntu.com>
:ubuntu:XSBC-Original-Maintainer: Debian QEMU Team <pkg-qemu-devel@lists.alioth.debian.org>
Uploaders: Aurelien Jarno <aurel32@debian.org>,
	Riku Voipio <riku.voipio@iki.fi>,
	Vagrant Cascadian <vagrant@debian.org>,
	Michael Tokarev <mjt@tls.msk.ru>
Build-Depends: debhelper (>= 9),
# In comments below we also specify (system-specific) arguments
# to qemu's configure script, -- optional features which depend
# on build-dependencies.
# pc-bios/*.dts => *.dtb (PPC firmware)
 device-tree-compiler,
 texinfo,
 python:any,
# compiling .dsl files in hw/i386/ instead of using included precompiled .hex
 acpica-tools,
# --enable-linux-aio	linux-*
 libaio-dev [linux-any],
# --audio-drv-list=pa,alsa,sdl,oss	linux-*
# --audio-drv-list=pa,oss,sdl		kfreebsd-*
 libasound2-dev [linux-any],
# for virtfs
# --enable-attr
 libattr1-dev,
# --enable-bluez	linux-*
 libbluetooth-dev [linux-any],
# --enable-brlapi
 libbrlapi-dev,
# --enable-virtfs	linux-*
# needed for virtfs
 libcap-dev [linux-any],
# --enable-cap-ng	linux-*
 libcap-ng-dev [linux-any],
# --enable-curl
 libcurl4-gnutls-dev,
# --enable-fdt
 libfdt-dev,
# --enable-gnutls
 gnutls-dev,
# gtk ui is almost the same as sdl but adds bloat
# --disable-gtk
## --with-gtkabi=2.0
# libgtk2.0-dev, libvte-dev (>> 0.18.0~),
# vte is used together with gtk
# --disable-vte
# libiscsi is debian-only since ubuntu/libiscsi is in universe
:debian:# --enable-libiscsi
:debian: libiscsi-dev (>> 1.9.0~),
# --enable-curses
 libncursesw5-dev,
:debian:# --enable-libnfs
:debian: libnfs-dev (>> 1.9.3),
# --enable-numa i386|amd64|ia64|mips|mipsel|powerpc|powerpcspe|x32|ppc64|ppc64el|arm64|sparc|hppa
 libnuma-dev   [i386 amd64 ia64 mips mipsel powerpc powerpcspe x32 ppc64 ppc64el arm64 sparc hppa],
# --enable-smartcard
 libcacard-dev,
# --with-system-pixman
 libpixman-1-dev,
# audio-drv-list += pa
 libpulse-dev,
# --enable-rbd		linux-*
 librados-dev [linux-any], librbd-dev [linux-any],
# --enable-glusterfs
 glusterfs-common,
# --enable-vnc-sasl
 libsasl2-dev,
# note: libsdl2-dev is in universe on ubuntu
# --enable-sdl --with-sdlabi=1.2
 libsdl1.2-dev (>> 1.2.1),
# --enable-seccomp	linux-amd64|linux-i386
 libseccomp-dev (>> 2.1.0) [linux-amd64 linux-i386],
# --enable-spice	linux-amd64|linux-i386
 libspice-server-dev (>= 0.12.2~) [linux-amd64 linux-i386],
 libspice-protocol-dev (>= 0.12.3~) [linux-amd64 linux-i386],
# --enable-libusb	linux-*
 libusb-1.0-0-dev (>= 2:1.0.13~) [linux-any],
# --enable-usb-redir	linux-*
 libusbredirparser-dev (>= 0.6~) [linux-any],
# libssh2 is debian-only since ubuntu/libssh2 is in universe
:debian:# --enable-libssh2
:debian: libssh2-1-dev,
# vde is debian-only since ubuntu/vde2 is in universe
:debian:# --enable-vde
:debian: libvdeplug-dev,
# needed for sdl
 libx11-dev,
# --enable-xen	linux-amd64|linux-i386
 libxen-dev [linux-amd64 linux-i386],
# XXX need to check minimum linux-headers requiriment
 linux-libc-dev (>= 2.6.34) [linux-any],
## always enabled: --enable-uuid
 uuid-dev,
# --enable-xfsctl	linux-*
 xfslibs-dev [linux-any],
# always needed
 zlib1g-dev,
# other optional features we enable
# --enable-vnc
# --enable-vnc-jpeg
 libjpeg-dev,
# --enable-vnc-png
 libpng-dev,
# --enable-kvm		linux-*
# --enable-vhost-net	linux-*	# is it really linux-specific?
##--enable-lzo todo
##--enable-netmap todo bsd
##--enable-quorum todo needs gcrypt
##--enable-xen-pci-passthrough todo
Build-Conflicts: oss4-dev
Standards-Version: 3.9.8
Homepage: http://www.qemu.org/
:debian:Vcs-Browser: https://anonscm.debian.org/gitweb/?p=pkg-qemu/qemu.git
:ubuntu:Vcs-Browser: https://anonscm.debian.org/gitweb/?p=pkg-qemu/qemu.git;a=shortlog;h=refs/heads/ubuntu-utopic
:ubuntu:XS-Debian-Vcs-Browser: https://anonscm.debian.org/gitweb/?p=pkg-qemu/qemu.git
:debian:Vcs-Git: git://anonscm.debian.org/pkg-qemu/qemu.git
:ubuntu:Vcs-Git: git://anonscm.debian.org/pkg-qemu/qemu.git -b ubuntu-utopic
:ubuntu:XS-Debian-Vcs-Git: git://anonscm.debian.org/pkg-qemu/qemu.git

Package: qemu
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${misc:Depends}, qemu-system (>= ${source:Version}), qemu-user (>= ${source:Version}) [linux-any], qemu-utils (>= ${source:Version})
Suggests: qemu-user-static [linux-any]
Description: fast processor emulator
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs. QEMU has
 two operating modes:
 .
  * User mode emulation: QEMU can launch Linux processes compiled for
    one CPU on another CPU.
  * Full system emulation: QEMU emulates a full system, including a
    processor and various peripherals. It enables easier testing and
    debugging of system code. It can also be used to provide virtual
    hosting of several virtual machines on a single server.
 .
 As QEMU requires no host kernel patches to run, it is very safe and
 easy to use.
 .
 This package is a metapackage depending on all qemu-related packages.

Package: qemu-system
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${misc:Depends},
 qemu-system-arm,
 qemu-system-mips,
 qemu-system-ppc, 
 qemu-system-sparc, 
 qemu-system-x86,
 qemu-system-misc
Description: QEMU full system emulation binaries
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This metapackage provides the full system emulation binaries for all supported
 targets, by depending on all per-architecture system emulation packages which
 QEMU supports.

Package: qemu-block-extra
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: same
Depends: ${misc:Depends}, ${shlibs:Depends},
Enhances: qemu-utils, qemu-system-misc,
 qemu-system-arm, qemu-system-mips, qemu-system-sparc, qemu-system-x86
Description: extra block backend modules for qemu-system and qemu-utils
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides extra block device backend modules for qemu-system
 emulation and qemu-img from qemu-utils package, which are rarely used and
 has extra dependencies.

Package: qemu-system-common
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Pre-Depends: adduser
Provides: qemu-keymaps
Depends: ${misc:Depends}, ${shlibs:Depends},
# to fix wrong acl for newly created device node on ubuntu:
:ubuntu: udev, acl
Breaks:
:ubuntu: qemu-common,
# qemu-system before qemu-system-split
  qemu-system (<< 1.3.0+dfsg-5),
# qemu-utils had virtfs-proxy-helper
  qemu-utils (<< 1.3.0+dfsg-4),
# we swallowed qemu-keymaps in 2.0.0+dfsg-7
  qemu-keymaps,
# iproute before 20110315 were unable to deal with bridge (set master device)
  iproute (<< 20110315-1)
Replaces:
:ubuntu: qemu (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common,
  qemu-system (<< 1.3.0+dfsg-5),
  qemu-utils (<< 1.3.0+dfsg-4),
  qemu-keymaps,
Description: QEMU full system emulation binaries (common files)
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides common files needed for target-specific
 full system emulation (qemu-system-*) packages.

Package: qemu-system-misc
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~)
Recommends: qemu-utils,
# alpha uses vgabios
# alpha m68k sh4 uses bootroms
 seabios, ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~)
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}),
Provides: ${sysprovides:misc}
Breaks: qemu-system (<< 1.3.0+dfsg-5)
Replaces: qemu-system (<< 1.3.0+dfsg-5)
Description: QEMU full system emulation binaries (miscellaneous)
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, M68k (ColdFire), MicroBlaze, and SH4
 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 various other hardware which did not made into separate packages.
 Emulators for the following architectures are provided:
  ${sysarch:misc}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-arm
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~)
Recommends: qemu-utils,
# aarch64 arm uses bootroms
 ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~),
 qemu-efi
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}),
Provides: ${sysprovides:arm}
Breaks: qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
:ubuntu: qemu-system-aarch64 (<< 2.0.0~rc1+dfsg-0ubuntu1),
Replaces: qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
:ubuntu: qemu-system-aarch64 (<< 2.0.0~rc1+dfsg-0ubuntu1),
Description: QEMU full system emulation binaries (arm)
 QEMU is a fast processor emulator: currently the package supports
 ARM emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following arm hardware: ${sysarch:arm}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-mips
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~)
Recommends: qemu-utils,
# all mips targets uses vgabios and bootroms
 seabios, ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~)
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}),
Provides: ${sysprovides:mips}
Breaks: qemu-system (<< 1.3.0+dfsg-5)
Replaces: qemu-system (<< 1.3.0+dfsg-5)
Description: QEMU full system emulation binaries (mips)
 QEMU is a fast processor emulator: currently the package supports
 MIPS emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following mips hardware: ${sysarch:mips}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-ppc
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~),
 qemu-slof,
# ubuntu can't Depend on openbios-ppc and openhackware as they're in universe
:debian: openbios-ppc (>= 1.1+svn1229), openhackware
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}),
:ubuntu: openbios-ppc (>= 1.1+svn1229), openhackware
Recommends: qemu-utils,
# ppc targets use vgabios-stdvga and bootroms
 seabios, ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~)
Provides: ${sysprovides:ppc}
Breaks: qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Replaces: qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Description: QEMU full system emulation binaries (ppc)
 QEMU is a fast processor emulator: currently the package supports
 PowerPC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following PowerPC hardware: ${sysarch:ppc}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-sparc
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~),
# ubuntu/openbios-sparc is in universe
:debian: openbios-sparc (>> 1.1+svn1395-1~)
Recommends: qemu-utils,
# sparc64 uses vgabios-stdvga and bootroms
 seabios, ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~)
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}), 
Provides: ${sysprovides:sparc}
Breaks:
 qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Replaces:
 qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Description: QEMU full system emulation binaries (sparc)
 QEMU is a fast processor emulator: currently the package supports
 SPARC emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following sparc hardware: ${sysarch:sparc}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.

Package: qemu-system-x86
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, qemu-system-common (>> 2.0.0+dfsg-7~),
 seabios (>= 1.9.3-2~), ipxe-qemu (>= 1.0.0+git-20131111.c3d1e78-1~)
Recommends: qemu-utils,
:ubuntu: cpu-checker
Suggests: samba, vde2, qemu-block-extra (= ${binary:Version}),
 kmod [linux-any], sgabios, ovmf
Provides: ${sysprovides:x86}
:ubuntu:Conflicts: kvm (<< 1.3.0+dfsg-5)
Breaks:
 qemu-system (<< 1.3.0+dfsg-5),
# older libvirt (eg 1.0) is known broken with qemu >= 1.6
 libvirt0 (<< 1.2),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Replaces:
 qemu-system (<< 1.3.0+dfsg-5),
:ubuntu: qemu-common (<< 1.3.0+dfsg-5),
:ubuntu: qemu-kvm (<< 1.2.0.dfsg-1),
:ubuntu: kvm (<< 1.3.0+dfsg-5),
Description: QEMU full system emulation binaries (x86)
 QEMU is a fast processor emulator: currently the package supports
 i386 and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the full system emulation binaries to emulate
 the following x86 hardware: ${sysarch:x86}.
 .
 In system emulation mode QEMU emulates a full system, including a processor
 and various peripherals.  It enables easier testing and debugging of system
 code.  It can also be used to provide virtual hosting of several virtual
 machines on a single server.
 .
 On x86 host hardware this package also enables KVM kernel virtual machine
 usage on systems which supports it.

Package: qemu-user
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}
Recommends: qemu-user-binfmt
Suggests: sudo
:ubuntu:Breaks: qemu-kvm (<< 1.2.0.dfsg-1)
:ubuntu:Replaces: qemu-kvm (<< 1.2.0.dfsg-1)
Description: QEMU user mode emulation binaries
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the user mode emulation binaries. In this mode
 QEMU can launch Linux processes compiled for one CPU on another CPU.
 .
 If qemu-user-binfmt package is also installed, it will register binary
 format handlers from this qemu-user package with the kernel so it will
 be possible to run foreign binaries directly.  However, this might not
 be suitable for using inside foreign chroots, in which case it is
 possible to use qemu-user-static package instead of qemu-user-binmft, --
 qemu-user-static will register statically linked binfmt handlers instead.

Package: qemu-user-static
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Built-Using: ${built-using}
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}
Recommends: binfmt-support
Provides: qemu-user-binfmt
Conflicts: qemu-user-binfmt
Suggests: sudo
Description: QEMU user mode emulation binaries (static version)
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides the user mode emulation binaries, built
 statically. In this mode QEMU can launch Linux processes compiled for
 one CPU on another CPU.
 .
 If binfmt-support package is installed, qemu-user-static package will
 register binary formats which the provided emulators can handle, so
 that it will be possible to run foreign binaries directly.

Package: qemu-user-binfmt
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 mips mipsel powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${misc:Depends}, qemu-user (= ${binary:Version}), binfmt-support
Conflicts: qemu-user-static
Description: QEMU user mode binfmt registration for qemu-user
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides binfmt support registration for the user mode
 emulation binaries from qemu-user.  This is an empty package, it does
 not contain any additional files, only registration scripts which run
 at install and remove times.

Package: qemu-utils
Architecture: amd64 arm arm64 armel armhf hppa i386 ia64 kfreebsd-amd64 kfreebsd-i386 mips mipsel mips64 mips64el powerpc powerpcspe ppc64 ppc64el s390x sparc sparc64 x32
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}
Suggests: debootstrap, qemu-block-extra (= ${binary:Version}),
:ubuntu:Conflicts: qemu-user (<< 0.11.1-2), qemu-kvm (<< 1.2.0.dfsg-1)
:ubuntu:Replaces: qemu-user (<< 0.11.1-2), qemu-kvm (<< 1.2.0.dfsg-1)
Description: QEMU utilities
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides QEMU related utilities:
  * qemu-img: QEMU disk image utility
  * qemu-io:  QEMU disk exerciser
  * qemu-nbd: QEMU disk network block device server

Package: qemu-guest-agent
Architecture: any
Multi-Arch: foreign
Depends: ${shlibs:Depends}, ${misc:Depends}, lsb-base (>= 3.0-6)
Description: Guest-side qemu-system agent
 QEMU is a fast processor emulator: currently the package supports
 ARM, CRIS, i386, M68k (ColdFire), MicroBlaze, MIPS, PowerPC, SH4,
 SPARC and x86-64 emulation. By using dynamic translation it achieves
 reasonable speed while being easy to port on new host CPUs.
 .
 This package provides a daemon (agent) to run inside qemu-system
 guests (full system emulation).  It communicates with the host using
 a virtio-serial channel org.qemu.guest_agent.0, and allows one to perform
 some functions in the guest from the host, including:
  - querying and setting guest system time
  - performing guest filesystem sync operation
  - initiating guest shutdown or suspend to ram
  - accessing guest files
  - freezing/thawing guest filesystem operations
  - others.
 .
 Install this package on a system which is running as guest inside
 qemu virtual machine.  It is not used on the host.

Package: qemu-kvm
:debian:Architecture: i386 amd64
:ubuntu:Architecture: i386 amd64 armhf armel powerpc sparc
Multi-Arch: foreign
Pre-Depends: ${misc:Pre-Depends}
Depends: ${misc:Depends}, qemu-system-x86 (>= 1.7.0+dfsg-2~)
Provides: kvm,
:ubuntu: qemu-kvm-spice
Conflicts: kvm,
:ubuntu: qemu-kvm-spice
Breaks: qemu-system-x86 (<< 1.7.0+dfsg-2~)
Replaces: qemu-system-x86 (<< 1.7.0+dfsg-2~),
:ubuntu: qemu-kvm-spice
Description: QEMU Full virtualization on x86 hardware
 QEMU is a fast processor emulator.  This package provides just a wrapper
 script /usr/bin/kvm which run qemu-system-x86 in kvm mode for backwards
 compatibility.
 .
 Please note that old qemu-kvm configuration files (in /etc/kvm/) are
 no longer used.

:ubuntu:Package: qemu-system-aarch64
:ubuntu:Architecture: arm64
:ubuntu:Multi-Arch: foreign
:ubuntu:Depends: ${misc:Depends}, qemu-system-arm (>= 2.0~git-20140403.de03c31-0ubuntu2)
:ubuntu:Description: QEMU full system emulation binaries (aarch64)
:ubuntu: QEMU is a fast processor emulator: currently the package supports
:ubuntu: ARM emulation. By using dynamic translation it achieves
:ubuntu: reasonable speed while being easy to port on new host CPUs.
:ubuntu: .
:ubuntu: This is a transition package as qemu-system-aarch64 has been moved into
:ubuntu: qemu-system-arm.