Commit 1ad2134f authored by Paul Brook's avatar Paul Brook

Hardware convenience library

The only target dependency for most hardware is sizeof(target_phys_addr_t).
Build these files into a convenience library, and use that instead of
building for every target.

Remove and poison various target specific macros to avoid bogus target
dependencies creeping back in.

Big/Little endian is not handled because devices should not know or care
about this to start with.
Signed-off-by: default avatarPaul Brook <paul@codesourcery.com>
parent 8a637d44
......@@ -4,6 +4,8 @@ i386
*-darwin-user
*-linux-user
*-bsd-user
libhw32
libhw64
qemu-doc.html
qemu-tech.html
qemu-doc.info
......
# Makefile for QEMU.
ifneq ($(wildcard config-host.mak),)
# Put the all: rule here so that config-host.mak can contain dependencies.
all: build-all
include config-host.mak
include $(SRC_PATH)/rules.mak
else
......@@ -41,7 +43,7 @@ ifdef CONFIG_WIN32
LIBS+=-lwinmm -lws2_32 -liphlpapi
endif
all: $(TOOLS) $(DOCS) recurse-all
build-all: $(TOOLS) $(DOCS) recurse-all
config-host.mak: configure
ifneq ($(wildcard config-host.mak),)
......@@ -237,14 +239,14 @@ clean:
rm -f *.o *.d *.a $(TOOLS) TAGS cscope.* *.pod *~ */*~
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
$(MAKE) -C tests clean
for d in $(TARGET_DIRS); do \
for d in $(TARGET_DIRS) libhw32 libhw64; do \
$(MAKE) -C $$d $@ || exit 1 ; \
done
distclean: clean
rm -f config-host.mak config-host.h $(DOCS) qemu-options.texi
rm -f qemu-{doc,tech}.{info,aux,cp,dvi,fn,info,ky,log,pg,toc,tp,vr}
for d in $(TARGET_DIRS); do \
for d in $(TARGET_DIRS) libhw32 libhw64; do \
rm -rf $$d || exit 1 ; \
done
......
# Makefile for qemu target independent devices.
include config.mak
include ../config-host.mak
include $(SRC_PATH)/rules.mak
.PHONY: all
VPATH=$(SRC_PATH):$(SRC_PATH)/hw
CFLAGS += $(OS_CFLAGS) $(ARCH_CFLAGS)
LDFLAGS += $(OS_LDFLAGS) $(ARCH_LDFLAGS)
CPPFLAGS += -I. -I$(SRC_PATH) -MMD -MP -MT $@
CPPFLAGS += -D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
CPPFLAGS+=-I$(SRC_PATH)/fpu
OBJS=
OBJS+= virtio.o virtio-pci.o
OBJS+= fw_cfg.o
OBJS+= watchdog.o
OBJS+= nand.o ecc.o
OBJS+= m48t59.o
OBJS+= dma-helpers.o sysbus.o
all: $(HWLIB)
$(HWLIB): $(OBJS)
clean:
rm -f *.o *.d *.a *~
# Include automatically generated dependency files
-include $(wildcard *.d */*.d)
......@@ -485,13 +485,11 @@ endif #CONFIG_BSD_USER
# System emulator target
ifndef CONFIG_USER_ONLY
OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o dma-helpers.o \
gdbstub.o gdbstub-xml.o sysbus.o
OBJS=vl.o osdep.o monitor.o pci.o loader.o isa_mmio.o machine.o \
gdbstub.o gdbstub-xml.o
# virtio has to be here due to weird dependency between PCI and virtio-net.
# need to fix this properly
OBJS+=virtio.o virtio-pci.o
OBJS+=virtio-blk.o virtio-balloon.o virtio-net.o virtio-console.o
OBJS+=fw_cfg.o
ifdef CONFIG_KVM
OBJS+=kvm.o kvm-all.o
endif
......@@ -564,7 +562,6 @@ OBJS += rtl8139.o
OBJS += e1000.o
# Generic watchdog support and some watchdog devices
OBJS += watchdog.o
OBJS += wdt_ib700.o wdt_i6300esb.o
ifeq ($(TARGET_BASE_ARCH), i386)
......@@ -581,7 +578,7 @@ CPPFLAGS += -DHAS_AUDIO -DHAS_AUDIO_CHOICE
# shared objects
OBJS+= ppc.o ide.o vga.o $(SOUND_HW) dma.o openpic.o
# PREP target
OBJS+= pckbd.o serial.o i8259.o i8254.o fdc.o m48t59.o mc146818rtc.o
OBJS+= pckbd.o serial.o i8259.o i8254.o fdc.o mc146818rtc.o
OBJS+= prep_pci.o ppc_prep.o
# Mac shared devices
OBJS+= macio.o cuda.o adb.o mac_nvram.o mac_dbdma.o escc.o
......@@ -624,15 +621,15 @@ OBJS+= etraxfs_eth.o
OBJS+= etraxfs_timer.o
OBJS+= etraxfs_ser.o
OBJS+= pflash_cfi02.o nand.o
OBJS+= pflash_cfi02.o
endif
ifeq ($(TARGET_BASE_ARCH), sparc)
ifeq ($(TARGET_ARCH), sparc64)
OBJS+= sun4u.o ide.o pckbd.o vga.o apb_pci.o
OBJS+= fdc.o mc146818rtc.o serial.o m48t59.o
OBJS+= fdc.o mc146818rtc.o serial.o
OBJS+= cirrus_vga.o parallel.o
else
OBJS+= sun4m.o tcx.o iommu.o m48t59.o slavio_intctl.o
OBJS+= sun4m.o tcx.o iommu.o slavio_intctl.o
OBJS+= slavio_timer.o escc.o slavio_misc.o fdc.o sparc32_dma.o
OBJS+= cs4231.o eccmemctl.o sbi.o sun4c_intctl.o
endif
......@@ -648,7 +645,7 @@ OBJS+= arm-semi.o
OBJS+= pxa2xx.o pxa2xx_pic.o pxa2xx_gpio.o pxa2xx_timer.o pxa2xx_dma.o
OBJS+= pxa2xx_lcd.o pxa2xx_mmci.o pxa2xx_pcmcia.o pxa2xx_keypad.o
OBJS+= pflash_cfi01.o gumstix.o
OBJS+= zaurus.o ide.o serial.o nand.o ecc.o spitz.o tosa.o tc6393xb.o
OBJS+= zaurus.o ide.o serial.o spitz.o tosa.o tc6393xb.o
OBJS+= omap1.o omap_lcdc.o omap_dma.o omap_clk.o omap_mmc.o omap_i2c.o
OBJS+= omap2.o omap_dss.o soc_dma.o
OBJS+= omap_sx1.o palm.o tsc210x.o
......@@ -717,8 +714,8 @@ endif
vl.o: qemu-options.h
$(QEMU_PROG): LIBS += $(SDL_LIBS) $(COCOA_LIBS) $(CURSES_LIBS) $(BRLAPI_LIBS) $(VDE_LIBS)
$(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a
$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a
$(QEMU_PROG): ARLIBS=../libqemu_common.a libqemu.a $(HWLIB)
$(QEMU_PROG): $(OBJS) ../libqemu_common.a libqemu.a $(HWLIB)
$(call LINK,$(OBJS))
endif # !CONFIG_USER_ONLY
......
......@@ -1724,6 +1724,7 @@ fi
echo "TOOLS=$tools" >> $config_mak
test -f ${config_h}~ && cmp -s $config_h ${config_h}~ && mv ${config_h}~ $config_h
config_host_mak=${config_mak}
for target in $target_list; do
target_dir="$target"
......@@ -1844,6 +1845,7 @@ case "$target_cpu" in
echo "CONFIG_XEN=yes" >> $config_mak
echo "#define CONFIG_XEN 1" >> $config_h
fi
target_phys_bits=32
;;
x86_64)
echo "TARGET_ARCH=x86_64" >> $config_mak
......@@ -1865,11 +1867,13 @@ case "$target_cpu" in
echo "CONFIG_XEN=yes" >> $config_mak
echo "#define CONFIG_XEN 1" >> $config_h
fi
target_phys_bits=64
;;
alpha)
echo "TARGET_ARCH=alpha" >> $config_mak
echo "#define TARGET_ARCH \"alpha\"" >> $config_h
echo "#define TARGET_ALPHA 1" >> $config_h
target_phys_bits=64
;;
arm|armeb)
echo "TARGET_ARCH=arm" >> $config_mak
......@@ -1878,12 +1882,14 @@ case "$target_cpu" in
bflt="yes"
target_nptl="yes"
gdb_xml_files="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
target_phys_bits=32
;;
cris)
echo "TARGET_ARCH=cris" >> $config_mak
echo "#define TARGET_ARCH \"cris\"" >> $config_h
echo "#define TARGET_CRIS 1" >> $config_h
target_nptl="yes"
target_phys_bits=32
;;
m68k)
echo "TARGET_ARCH=m68k" >> $config_mak
......@@ -1891,18 +1897,21 @@ case "$target_cpu" in
echo "#define TARGET_M68K 1" >> $config_h
bflt="yes"
gdb_xml_files="cf-core.xml cf-fp.xml"
target_phys_bits=32
;;
mips|mipsel)
echo "TARGET_ARCH=mips" >> $config_mak
echo "#define TARGET_ARCH \"mips\"" >> $config_h
echo "#define TARGET_MIPS 1" >> $config_h
echo "#define TARGET_ABI_MIPSO32 1" >> $config_h
target_phys_bits=64
;;
mipsn32|mipsn32el)
echo "TARGET_ARCH=mipsn32" >> $config_mak
echo "#define TARGET_ARCH \"mipsn32\"" >> $config_h
echo "#define TARGET_MIPS 1" >> $config_h
echo "#define TARGET_ABI_MIPSN32 1" >> $config_h
target_phys_bits=64
;;
mips64|mips64el)
echo "TARGET_ARCH=mips64" >> $config_mak
......@@ -1910,12 +1919,14 @@ case "$target_cpu" in
echo "#define TARGET_MIPS 1" >> $config_h
echo "#define TARGET_MIPS64 1" >> $config_h
echo "#define TARGET_ABI_MIPSN64 1" >> $config_h
target_phys_bits=64
;;
ppc)
echo "TARGET_ARCH=ppc" >> $config_mak
echo "#define TARGET_ARCH \"ppc\"" >> $config_h
echo "#define TARGET_PPC 1" >> $config_h
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
target_phys_bits=32
;;
ppcemb)
echo "TARGET_ARCH=ppcemb" >> $config_mak
......@@ -1929,6 +1940,7 @@ case "$target_cpu" in
echo "#define CONFIG_KVM 1" >> $config_h
fi
gdb_xml_files="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
target_phys_bits=64
;;
ppc64)
echo "TARGET_ARCH=ppc64" >> $config_mak
......@@ -1937,6 +1949,7 @@ case "$target_cpu" in
echo "#define TARGET_PPC 1" >> $config_h
echo "#define TARGET_PPC64 1" >> $config_h
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
target_phys_bits=64
;;
ppc64abi32)
echo "TARGET_ARCH=ppc64" >> $config_mak
......@@ -1947,6 +1960,7 @@ case "$target_cpu" in
echo "#define TARGET_PPC64 1" >> $config_h
echo "#define TARGET_ABI32 1" >> $config_h
gdb_xml_files="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
target_phys_bits=64
;;
sh4|sh4eb)
echo "TARGET_ARCH=sh4" >> $config_mak
......@@ -1954,11 +1968,13 @@ case "$target_cpu" in
echo "#define TARGET_SH4 1" >> $config_h
bflt="yes"
target_nptl="yes"
target_phys_bits=32
;;
sparc)
echo "TARGET_ARCH=sparc" >> $config_mak
echo "#define TARGET_ARCH \"sparc\"" >> $config_h
echo "#define TARGET_SPARC 1" >> $config_h
target_phys_bits=64
;;
sparc64)
echo "TARGET_ARCH=sparc64" >> $config_mak
......@@ -1966,6 +1982,7 @@ case "$target_cpu" in
echo "#define TARGET_SPARC 1" >> $config_h
echo "#define TARGET_SPARC64 1" >> $config_h
elfload32="yes"
target_phys_bits=64
;;
sparc32plus)
echo "TARGET_ARCH=sparc64" >> $config_mak
......@@ -1975,12 +1992,19 @@ case "$target_cpu" in
echo "#define TARGET_SPARC 1" >> $config_h
echo "#define TARGET_SPARC64 1" >> $config_h
echo "#define TARGET_ABI32 1" >> $config_h
target_phys_bits=64
;;
*)
echo "Unsupported target CPU"
exit 1
;;
esac
if [ $target_phys_bits -lt $hostlongbits ] ; then
target_phys_bits=$hostlongbits
fi
echo "HWLIB=../libhw$target_phys_bits/libqemuhw$target_phys_bits.a" >> $config_mak
echo "#define TARGET_PHYS_ADDR_BITS $target_phys_bits" >> $config_h
echo "subdir-$target: subdir-libhw$target_phys_bits" >> $config_host_mak
if test "$target_bigendian" = "yes" ; then
echo "TARGET_WORDS_BIGENDIAN=yes" >> $config_mak
echo "#define TARGET_WORDS_BIGENDIAN 1" >> $config_h
......@@ -2065,3 +2089,12 @@ if test "$source_path_used" = "yes" ; then
ln -s $source_path/$f $f
done
fi
for hwlib in 32 64; do
d=libhw$hwlib
mkdir -p $d
rm -f $d/Makefile
ln -s $source_path/Makefile.hw $d/Makefile
echo "HWLIB=libqemuhw$hwlib.a" > $d/config.mak
echo "CPPFLAGS=-DTARGET_PHYS_ADDR_BITS=$hwlib" >> $d/config.mak
done
......@@ -21,10 +21,7 @@
#define CPU_ALL_H
#include "qemu-common.h"
#if defined(__arm__) || defined(__sparc__) || defined(__mips__) || defined(__hppa__)
#define WORDS_ALIGNED
#endif
#include "cpu-common.h"
/* some important defines:
*
......@@ -39,7 +36,6 @@
* TARGET_WORDS_BIGENDIAN : same for target cpu
*/
#include "bswap.h"
#include "softfloat.h"
#if defined(WORDS_BIGENDIAN) != defined(TARGET_WORDS_BIGENDIAN)
......@@ -847,13 +843,6 @@ int cpu_inw(CPUState *env, int addr);
int cpu_inl(CPUState *env, int addr);
#endif
/* address in the RAM (different from a physical address) */
#ifdef CONFIG_KQEMU
typedef uint32_t ram_addr_t;
#else
typedef unsigned long ram_addr_t;
#endif
/* memory API */
extern int phys_ram_fd;
......@@ -867,19 +856,8 @@ extern ram_addr_t last_ram_offset;
3 flags. The ROMD code stores the page ram offset in iotlb entry,
so only a limited number of ids are avaiable. */
#define IO_MEM_SHIFT 3
#define IO_MEM_NB_ENTRIES (1 << (TARGET_PAGE_BITS - IO_MEM_SHIFT))
#define IO_MEM_RAM (0 << IO_MEM_SHIFT) /* hardcoded offset */
#define IO_MEM_ROM (1 << IO_MEM_SHIFT) /* hardcoded offset */
#define IO_MEM_UNASSIGNED (2 << IO_MEM_SHIFT)
#define IO_MEM_NOTDIRTY (3 << IO_MEM_SHIFT)
/* Acts like a ROM when read and like a device when written. */
#define IO_MEM_ROMD (1)
#define IO_MEM_SUBPAGE (2)
#define IO_MEM_SUBWIDTH (4)
/* Flags stored in the low bits of the TLB virtual address. These are
defined so that fast path ram access is all zeros. */
/* Zero if TLB entry is valid. */
......@@ -890,67 +868,6 @@ extern ram_addr_t last_ram_offset;
/* Set if TLB entry is an IO callback. */
#define TLB_MMIO (1 << 5)
typedef void CPUWriteMemoryFunc(void *opaque, target_phys_addr_t addr, uint32_t value);
typedef uint32_t CPUReadMemoryFunc(void *opaque, target_phys_addr_t addr);
void cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
ram_addr_t size,
ram_addr_t phys_offset,
ram_addr_t region_offset);
static inline void cpu_register_physical_memory(target_phys_addr_t start_addr,
ram_addr_t size,
ram_addr_t phys_offset)
{
cpu_register_physical_memory_offset(start_addr, size, phys_offset, 0);
}
ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr);
ram_addr_t qemu_ram_alloc(ram_addr_t);
void qemu_ram_free(ram_addr_t addr);
/* This should only be used for ram local to a device. */
void *qemu_get_ram_ptr(ram_addr_t addr);
/* This should not be used by devices. */
ram_addr_t qemu_ram_addr_from_host(void *ptr);
int cpu_register_io_memory(int io_index,
CPUReadMemoryFunc **mem_read,
CPUWriteMemoryFunc **mem_write,
void *opaque);
void cpu_unregister_io_memory(int table_address);
void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
int len, int is_write);
static inline void cpu_physical_memory_read(target_phys_addr_t addr,
uint8_t *buf, int len)
{
cpu_physical_memory_rw(addr, buf, len, 0);
}
static inline void cpu_physical_memory_write(target_phys_addr_t addr,
const uint8_t *buf, int len)
{
cpu_physical_memory_rw(addr, (uint8_t *)buf, len, 1);
}
void *cpu_physical_memory_map(target_phys_addr_t addr,
target_phys_addr_t *plen,
int is_write);
void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len,
int is_write, target_phys_addr_t access_len);
void *cpu_register_map_client(void *opaque, void (*callback)(void *opaque));
void cpu_unregister_map_client(void *cookie);
uint32_t ldub_phys(target_phys_addr_t addr);
uint32_t lduw_phys(target_phys_addr_t addr);
uint32_t ldl_phys(target_phys_addr_t addr);
uint64_t ldq_phys(target_phys_addr_t addr);
void stl_phys_notdirty(target_phys_addr_t addr, uint32_t val);
void stq_phys_notdirty(target_phys_addr_t addr, uint64_t val);
void stb_phys(target_phys_addr_t addr, uint32_t val);
void stw_phys(target_phys_addr_t addr, uint32_t val);
void stl_phys(target_phys_addr_t addr, uint32_t val);
void stq_phys(target_phys_addr_t addr, uint64_t val);
void cpu_physical_memory_write_rom(target_phys_addr_t addr,
const uint8_t *buf, int len);
int cpu_memory_rw_debug(CPUState *env, target_ulong addr,
uint8_t *buf, int len, int is_write);
......
#ifndef CPU_COMMON_H
#define CPU_COMMON_H 1
/* CPU interfaces that are target indpendent. */
#if defined(__arm__) || defined(__sparc__) || defined(__mips__) || defined(__hppa__)
#define WORDS_ALIGNED
#endif
#include "bswap.h"
/* address in the RAM (different from a physical address) */
#ifdef CONFIG_KQEMU
/* FIXME: This is wrong. */
typedef uint32_t ram_addr_t;
#else
typedef unsigned long ram_addr_t;
#endif
/* memory API */
typedef void CPUWriteMemoryFunc(void *opaque, target_phys_addr_t addr, uint32_t value);
typedef uint32_t CPUReadMemoryFunc(void *opaque, target_phys_addr_t addr);
void cpu_register_physical_memory_offset(target_phys_addr_t start_addr,
ram_addr_t size,
ram_addr_t phys_offset,
ram_addr_t region_offset);
static inline void cpu_register_physical_memory(target_phys_addr_t start_addr,
ram_addr_t size,
ram_addr_t phys_offset)
{
cpu_register_physical_memory_offset(start_addr, size, phys_offset, 0);
}
ram_addr_t cpu_get_physical_page_desc(target_phys_addr_t addr);
ram_addr_t qemu_ram_alloc(ram_addr_t);
void qemu_ram_free(ram_addr_t addr);
/* This should only be used for ram local to a device. */
void *qemu_get_ram_ptr(ram_addr_t addr);
/* This should not be used by devices. */
ram_addr_t qemu_ram_addr_from_host(void *ptr);
int cpu_register_io_memory(int io_index,
CPUReadMemoryFunc **mem_read,
CPUWriteMemoryFunc **mem_write,
void *opaque);
void cpu_unregister_io_memory(int table_address);
void cpu_physical_memory_rw(target_phys_addr_t addr, uint8_t *buf,
int len, int is_write);
static inline void cpu_physical_memory_read(target_phys_addr_t addr,
uint8_t *buf, int len)
{
cpu_physical_memory_rw(addr, buf, len, 0);
}
static inline void cpu_physical_memory_write(target_phys_addr_t addr,
const uint8_t *buf, int len)
{
cpu_physical_memory_rw(addr, (uint8_t *)buf, len, 1);
}
void *cpu_physical_memory_map(target_phys_addr_t addr,
target_phys_addr_t *plen,
int is_write);
void cpu_physical_memory_unmap(void *buffer, target_phys_addr_t len,
int is_write, target_phys_addr_t access_len);
void *cpu_register_map_client(void *opaque, void (*callback)(void *opaque));
void cpu_unregister_map_client(void *cookie);
uint32_t ldub_phys(target_phys_addr_t addr);
uint32_t lduw_phys(target_phys_addr_t addr);
uint32_t ldl_phys(target_phys_addr_t addr);
uint64_t ldq_phys(target_phys_addr_t addr);
void stl_phys_notdirty(target_phys_addr_t addr, uint32_t val);
void stq_phys_notdirty(target_phys_addr_t addr, uint64_t val);
void stb_phys(target_phys_addr_t addr, uint32_t val);
void stw_phys(target_phys_addr_t addr, uint32_t val);
void stl_phys(target_phys_addr_t addr, uint32_t val);
void stq_phys(target_phys_addr_t addr, uint64_t val);
void cpu_physical_memory_write_rom(target_phys_addr_t addr,
const uint8_t *buf, int len);
#define IO_MEM_SHIFT 3
#define IO_MEM_RAM (0 << IO_MEM_SHIFT) /* hardcoded offset */
#define IO_MEM_ROM (1 << IO_MEM_SHIFT) /* hardcoded offset */
#define IO_MEM_UNASSIGNED (2 << IO_MEM_SHIFT)
#define IO_MEM_NOTDIRTY (3 << IO_MEM_SHIFT)
/* Acts like a ROM when read and like a device when written. */
#define IO_MEM_ROMD (1)
#define IO_MEM_SUBPAGE (2)
#define IO_MEM_SUBWIDTH (4)
#endif /* !CPU_COMMON_H */
......@@ -30,19 +30,12 @@
#include <signal.h>
#include "osdep.h"
#include "sys-queue.h"
#include "targphys.h"
#ifndef TARGET_LONG_BITS
#error TARGET_LONG_BITS must be defined before including this header
#endif
#ifndef TARGET_PHYS_ADDR_BITS
#if TARGET_LONG_BITS >= HOST_LONG_BITS
#define TARGET_PHYS_ADDR_BITS TARGET_LONG_BITS
#else
#define TARGET_PHYS_ADDR_BITS HOST_LONG_BITS
#endif
#endif
#define TARGET_LONG_SIZE (TARGET_LONG_BITS / 8)
/* target_ulong is the type of a virtual address */
......@@ -62,22 +55,6 @@ typedef uint64_t target_ulong;
#error TARGET_LONG_SIZE undefined
#endif
/* target_phys_addr_t is the type of a physical address (its size can
be different from 'target_ulong'). We have sizeof(target_phys_addr)
= max(sizeof(unsigned long),
sizeof(size_of_target_physical_address)) because we must pass a
host pointer to memory operations in some cases */
#if TARGET_PHYS_ADDR_BITS == 32
typedef uint32_t target_phys_addr_t;
#define TARGET_FMT_plx "%08x"
#elif TARGET_PHYS_ADDR_BITS == 64
typedef uint64_t target_phys_addr_t;
#define TARGET_FMT_plx "%016" PRIx64
#else
#error TARGET_PHYS_ADDR_BITS undefined
#endif
#define HOST_LONG_SIZE (HOST_LONG_BITS / 8)
#define EXCP_INTERRUPT 0x10000 /* async interruption */
......
......@@ -11,7 +11,8 @@
#define DMA_H
#include <stdio.h>
#include "cpu.h"
//#include "cpu.h"
#include "hw/hw.h"
#include "block.h"
typedef struct {
......
......@@ -24,8 +24,8 @@
#include "sysbus.h"
#include "hw.h"
#include "pc.h"
#include "etraxfs.h"
//#include "pc.h"
//#include "etraxfs.h"
#define D(x)
......
......@@ -3,6 +3,13 @@
#define QEMU_HW_H
#include "qemu-common.h"
#if defined(TARGET_PHYS_ADDR_BITS) && !defined(NEED_CPU_H)
#include "targphys.h"
#include "poison.h"
#include "cpu-common.h"
#endif
#include "irq.h"
/* VM Load/Save */
......
/* Poison identifiers that should not be used when building
target independent device code. */
#ifndef HW_POISON_H
#define HW_POISON_H
#ifdef __GNUC__
#pragma GCC poison TARGET_I386
#pragma GCC poison TARGET_X86_64
#pragma GCC poison TARGET_ALPHA
#pragma GCC poison TARGET_ARM
#pragma GCC poison TARGET_CRIS
#pragma GCC poison TARGET_M68K
#pragma GCC poison TARGET_MIPS
#pragma GCC poison TARGET_MIPS64
#pragma GCC poison TARGET_PPC
#pragma GCC poison TARGET_PPCEMB
#pragma GCC poison TARGET_PPC64
#pragma GCC poison TARGET_ABI32
#pragma GCC poison TARGET_SH4
#pragma GCC poison TARGET_SPARC
#pragma GCC poison TARGET_SPARC64
#pragma GCC poison TARGET_WORDS_BIGENDIAN
#endif
#endif
......@@ -17,7 +17,7 @@
#include "virtio.h"
#include "pci.h"
#include "sysemu.h"
//#include "sysemu.h"
/* from Linux's linux/virtio_pci.h */
......
......@@ -38,12 +38,14 @@ void qemu_system_powerdown_request(void);
int qemu_shutdown_requested(void);
int qemu_reset_requested(void);
int qemu_powerdown_requested(void);
#ifdef NEED_CPU_H
#if !defined(TARGET_SPARC) && !defined(TARGET_I386)
// Please implement a power failure function to signal the OS
#define qemu_system_powerdown() do{}while(0)
#else
void qemu_system_powerdown(void);
#endif
#endif
void qemu_system_reset(void);
void do_savevm(Monitor *mon, const char *name);
......@@ -117,11 +119,13 @@ extern uint64_t node_mem[MAX_NODES];
extern const char *option_rom[MAX_OPTION_ROMS];
extern int nb_option_roms;
#ifdef NEED_CPU_H
#if defined(TARGET_SPARC) || defined(TARGET_PPC)
#define MAX_PROM_ENVS 128
extern const char *prom_envs[MAX_PROM_ENVS];
extern unsigned int nb_prom_envs;
#endif
#endif
typedef enum {
IF_IDE, IF_SCSI, IF_FLOPPY, IF_PFLASH, IF_MTD, IF_SD, IF_VIRTIO, IF_XEN,
......
......@@ -14,9 +14,6 @@
#define TARGET_LONG_BITS 32
#endif
/* Even MIPS32 can have 36 bits physical address space. */
#define TARGET_PHYS_ADDR_BITS 64
/* Masks used to mark instructions to indicate which ISA level they
were introduced in. */
#define ISA_MIPS1 0x00000001
......
......@@ -37,7 +37,6 @@
#if defined(TARGET_PPCEMB)
/* Specific definitions for PowerPC embedded */
/* BookE have 36 bits physical address space */
#define TARGET_PHYS_ADDR_BITS 64
#if defined(CONFIG_USER_ONLY)
/* It looks like a lot of Linux programs assume page size
* is 4kB long. This is evil, but we have to deal with it...
......
......@@ -13,8 +13,6 @@
#define TARGET_PAGE_BITS 13 /* 8k */
#endif
#define TARGET_PHYS_ADDR_BITS 64
#define CPUState struct CPUSPARCState
#include "cpu-defs.h"
......
/* Define target_phys_addr_t if it exists. */
#ifndef TARGPHYS_H
#define TARGPHYS_H
#ifdef TARGET_PHYS_ADDR_BITS
/* target_phys_addr_t is the type of a physical address (its size can
be different from 'target_ulong'). We have sizeof(target_phys_addr)
= max(sizeof(unsigned long),
sizeof(size_of_target_physical_address)) because we must pass a
host pointer to memory operations in some cases */
#if TARGET_PHYS_ADDR_BITS == 32
typedef uint32_t target_phys_addr_t;
#define TARGET_FMT_plx "%08x"
#elif TARGET_PHYS_ADDR_BITS == 64
typedef uint64_t target_phys_addr_t;
#define TARGET_FMT_plx "%016" PRIx64
#endif
#endif
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment