librem5: Set the SoC voltages lower

They're still in the operating range and appear stable on my devices. YMMV.
parent 2bf7c3f3
......@@ -35,7 +35,7 @@ reg_camera1_pwr_en: regulator-camera1-pwr-en {
&a53_opp_table {
opp-1000000000 {
opp-microvolt = <1000000>;
opp-microvolt = <930000>;
};
};
......
......@@ -1107,8 +1107,8 @@ buck1_reg: BUCK1 {
regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-idle-voltage = <850000>;
rohm,dvs-suspend-voltage = <800000>;
rohm,dvs-idle-voltage = <820000>;
rohm,dvs-suspend-voltage = <820000>;
regulator-always-on;
};
......@@ -1118,7 +1118,7 @@ buck2_reg: BUCK2 {
regulator-max-microvolt = <1300000>;
regulator-boot-on;
regulator-ramp-delay = <1250>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-run-voltage = <930000>;
rohm,dvs-idle-voltage = <900000>;
regulator-always-on;
};
......@@ -1128,14 +1128,14 @@ buck3_reg: BUCK3 {
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
regulator-boot-on;
rohm,dvs-run-voltage = <900000>;
rohm,dvs-run-voltage = <860000>;
};
buck4_reg: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <700000>;
regulator-max-microvolt = <1300000>;
rohm,dvs-run-voltage = <1000000>;
rohm,dvs-run-voltage = <860000>;
};
buck5_reg: BUCK5 {
......@@ -1746,3 +1746,9 @@ &wdog1 {
fsl,ext-reset-output;
status = "okay";
};
&a53_opp_table {
opp-1500000000 {
opp-microvolt = <930000>;
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment