Skip to content
i.MX device tree changes for 5.5:
 - New board support: Netronix E60K02 and Kobo Clara HD, Kontron N6311
   and N6411, OPOS6UL and OPOS6ULDev.
 - Correct speed grading fuse settings and add opp-suspend property for
   i.MX7D device tree.
 - Move usdhc clocks assignment from SoC to board level DTS for imx7ulp,
   and use APLL_PFD1 as usdhc's clock source on imx7ulp-evk board.
 - Add missing cooling device properties for CPUs for i.MX6/7 SoCs.
 - Add sensor GPIO regulator and assign power supplies for magnetometer
   for imx6ul-14x14-evk board.
 - Replace "simple-bus" with "simple-mfd" for ANATOP device for i.MX6/7
 - Fix DTC W=1 warnings by not using simple-audio-card,dai-link on
   imx6qdl-gw551x and imx6q-gw54xx board.
 - Move to use DRM bindings for the Seiko 43WVF1G panel on imx53-qsb.
 - A series from Frieder Schrempf to support more i.MX6UL/ULL-based SoMs
   and boards from Kontron Electronics GmbH.
 - A few patches from Michal Vokáč to enable more devices support on
   imx6dl-yapp4 board.
 - A patch series from Philippe Schenker to improve i.MX6/7 Apalis and
   Colibri board support.
 - A patch series from Sébastien Szymanski to update i.MX6 APF6/APF6Dev
   device tree with more devices added and adopting DRM bindings for
 - Random improvements, clean-up and device additions on various boards.