Skip to content

Tags

Tags give the ability to mark specific points in history as being important
  • pureos/5.3.0+librem5.10
    linux-5.3.0-librem5-h1 v5.3.0+librem5.10
    
  • v5.6-rc2
    11a48a5a · Linux 5.6-rc2 ·
    Linux 5.6-rc2
    
  • v5.6-rc1
    bb6d3fb3 · Linux 5.6-rc1 ·
    Linux 5.6-rc1
    
  • v5.5
    d5226fa6 · Linux 5.5 ·
    Linux 5.5
    
  • pureos/5.3.0+librem5.9
    linux-5.3.0-librem5-h1 v5.3.0+librem5.9
    
  • v5.5-rc7
    def9d278 · Linux 5.5-rc7 ·
    Linux 5.5-rc7
    
  • imx-clk-5.6
    i.MX clock changes for 5.6:
    
     - A series from Abel Vesa to do some trivial cleanups which will be
       helpful for i.MX clock driver switching to clk_hw based API.
     - A series from Anson Huang to add i.MX8MP clock driver support.
     - Disable non-functional divider between pll4_audio_div and
       pll4_post_div on imx6q.
     - Fix watchdog2 clock name typo in imx7ulp clock driver.
     - A couple of patches from Leonard Crestez to set CLK_GET_RATE_NOCACHE
       flag for DRAM related clocks on i.MX8M SoCs.
     - Suppress bind attrs for i.MX8M clock driver to avoid the possibility
       of reloading the driver at runtime.
     - Add a big comment in imx8qxp-lpcg driver to tell why
       devm_platform_ioremap_resource() shouldn't be used for the driver.
     - A correction on i.MX8MN usb1_ctrl parent clock setting.
     - A couple of trivial cleanup on clk-divider-gate driver.
     - A series from Peng Fan to convert i.MX8M clock drivers to clk_hw
       based API.
    
  • imx-defconfig-5.6
    i.MX defconfig update for 5.6:
    
     - Enable i.MX8MP clock driver in arm64 defconfig.
     - Enable Crypto CAAM driver support as module in arm64 defconfig.
     - Enable ILI210X touch driver, USB CDC ACM function, NFS_V4 support and
       TFP410 DVI bridge driver support in arm32 imx_v6_v7_defconfig.
    
  • imx-dt64-5.6
    i.MX arm64 device tree update for 5.6:
    
     - New board support: i.MX8MQ based Thor96 board, Google i.MX8MQ Phanbell
       board, LX2160A based Solidrun Clearfog CX and Honeycomb boards.
     - Add eLCDIF controller and missing SAI nodes for i.MX8MQ SoC.
     - Add Crypto CAAM support for i.MX8MM and i.MX8MN.
     - Drop unneeded "simple-bus" from anatop node on i.MX8MM and i.MX8MN.
     - Drop unused/undocumented "fsl,aips-bus" and "fsl,imx8mq-aips-bus"
       compatibles from i.MX8M SoCs.
     - Add DDR controller nodes for i.MX8M devices.
     - Add EEPROM description for imx8mq-hummingboard-pulse and
       imx8mq-sr-som boards.
     - Enable USB1 and TypeC support for imx8mn-evk board.
     - Add FlexSPI and QSPI support for a few Layerscape SoCs and boards.
     - Add External MDIO1 node and the two RGMII PHYs connected on LX2160A.
     - Add missing SAI devices and set SAIs into async mode on LS1028A.
     - Other random device additions and enhancement for various platforms.
    
  • imx-dt-5.6
    i.MX device tree update for 5.6:
    
     - New board support: i.MX6SL based Tolino Shine 3 eBook reader,
       i.MX7ULP Embedded Artists COM Board, i.MX6Q/DL based Gateworks
       Ventana Boards.
     - A couple of series from Andrey Smirnov to enhance i.MX6 RDU2 and
       VF610 ZII boards.
     - Add revision in board compatible string for imx6sx-sdb-reva and
       imx7d-sdb-reva board.
     - A fixup on imx6sl-tolino-shine3 board to remove incorrect power
       supply assignment.
     - Set initial buck regulator modes explicitly for phycore-imx6 board,
       so that a wrong initial mode set by bootloader does not interfere.
     - Add Add LCD support for imx7d-pico board.
     - A couple of patches from Michael Grzeschik to enhance USB Host
       support on i.MX25.
     - A couple of patches from Michael Trimarchi to remove duplicate
       Ethernet PHY reset properties on imx6qdl-icore and switch to
       phy-handle.
     - A couple of changes to add extirq node support on LS1021A SoC and
       make use of it on the LS1021A-TSN board.
     - A few random device additions and improvements on various boards.
    
  • v5.5-rc6
    b3a987b0 · Linux 5.5-rc6 ·
    Linux 5.5-rc6
    
  • imx-bindings-5.6
    i.MX DT bindings update for 5.6:
    
     - Add compatibles for boards:
         i.MX6 SoloX SDB Rev-A Board
         i.MX7 SabreSD Rev-A Board
         i.MX6SL based Tolino Shine 3 eBook reader
         i.MX7ULP Embedded Artists COM Board
         i.MX8MQ Thor96 Board
         i.MX8MQ based Google Coral Edge TPU
         i.MX6Q/DL based Gateworks Ventana Boards
         LX2160A based QDS and RDB Boards
     - Add missing imx6sll into fsl-pxp bindings.
     - Add i.MX8MQ LCDIF compatible into mxsfb bindings.
    
  • imx-soc-5.6
    i.MX SoC changes for 5.6:
    
     - Add support for reading serial number from OCOTP on i.MX7ULP.
     - A patch from Anson to enable ARM_ERRATA_814220 for i.MX6UL & i.MX7D,
       and a fixup patch from Arnd to select the option only for ARMv7-A.
    
  • imx-driver-5.6
    i.MX driver changes for 5.6:
    
     - Add i.MX8MP SoC driver support.
     - Allow IMX DSP Protocol driver to be built as module.
     - Add COMPILE_TEST for IMX_SCU_SOC driver to increase build coverage.
     - Print SoC type and revision in i.MX8 SoC driver, as this is useful
       information to have when looking through boot log.
    
  • imx-fixes-5.5-2
    i.MX fixes for 5.5, round 2:
    
     - Fix i.MX8MM SDMA1 AHB clock setting to remove a "Timeout waiting for CH0"
       error seen with UART1.
     - Correct compatible of RV3029 RTC device on imx6q-dhcom board.
     - Correct interrupt trigger type for magnetometer on board
       imx8mq-librem5-devkit.
     - A series from Anson Huang to fix vdd3p0 power supplier for a few NXP
       development board.
     - Fix imx6q-icore-mipi board to use 1.5 version of i.Core MX6DL, so
       that Ethernet interface on the board works properly.
     - Fix Toradex Colibri board to get NAND flash support back.
     - Fix SGTL5000 VDDIO regulator connection for imx6q-dhcom, which
       is connected to PMIC SW2 output rather than a fixed 3V3 rail.
     - Fix 'reg' of CPU node on imx7ulp to get rid of a warning given by
       kernel.
     - Fix endian setting for DCFG on LS1028A SoC, so that register access
       of DCFG becomes correct.
    
  • pureos/5.3.0+librem5.8
    linux-5.3.0-librem5-h1 v5.3.0+librem5.8
    
  • v5.5-rc5
    c79f46a2 · Linux 5.5-rc5 ·
    Linux 5.5-rc5
    
  • pureos/5.3.0+librem5.7
    linux-5.3.0-librem5-h1 v5.3.0+librem5.7
    
  • v5.5-rc4
    fd698849 · Linux 5.5-rc4 ·
    Linux 5.5-rc4
    
  • pureos/5.3.0+librem5.6
    linux-5.3.0-librem5-h1 v5.3.0+librem5.6