- Nov 13, 2020
-
-
Dan Carpenter authored
The spin_lock/unlock_irq() functions cannot be nested. The problem is that presumably we would want the IRQs to be re-enabled on the second call the spin_unlock_irq() but instead it will be enabled at the first call so IRQs will be enabled earlier than expected. In this situation the copy_resp_to_buf() function is only called from one function and it is called with IRQs disabled. We can just use the regular spin_lock/unlock() functions. Fixes: 555e8a8f ("ALSA: fireworks: Add command/response functionality into hwdep interface") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
- Oct 12, 2020
-
-
Julia Lawall authored
Replace commas with semicolons. What is done is essentially described by the following Coccinelle semantic patch (http://coccinelle.lip6.fr/ ): // <smpl> @@ expression e1,e2; @@ e1 -, +; e2 ... when any // </smpl> Signed-off-by:
-
- Oct 07, 2020
-
-
Dan Carpenter authored
The "count" variable needs to be capped on every path so that we don't copy too much information to the user. Fixes: 618eabea ("ALSA: bebob: Add hwdep interface") Signed-off-by:
-
- Sep 11, 2020
-
-
Takashi Iwai authored
The tasklet is an old API that should be deprecated, usually can be converted to another decent API. In FireWire driver, a tasklet is still used for offloading the AMDTP PCM stream handling. It can be achieved gracefully with a work queued, too. This patch replaces the tasklet usage in firewire-lib driver with a simple work. The conversion is fairly straightforward but for the in_interrupt() checks that are replaced with the check using the current_work(). Note that in_interrupt() in amdtp_packet tracepoint is still kept as is. This is the place that is probed by both softirq of 1394 OHCI and a user task of a PCM application, and the work handling is already filtered in amdtp_domain_stream_pcm_pointer(). Tested-by:
-
- Sep 02, 2020
-
-
Allen Pais authored
In preparation for unconditionally passing the struct tasklet_struct pointer to all tasklet callbacks, switch to using the new tasklet_setup() and from_tasklet() to pass the tasklet pointer explicitly. Signed-off-by:
-
- Aug 23, 2020
-
-
Takashi Sakamoto authored
Avid Adrenaline is reported that ALSA firewire-digi00x driver is bound to. However, as long as he investigated, the design of this model is hardly similar to the one of Digi 00x family. It's better to exclude the model from modalias of ALSA firewire-digi00x driver. This commit changes device entries so that the model is excluded. $ python3 crpp < ~/git/am-config-rom/misc/avid-adrenaline.img ROM header and bus information block ----------------------------------------------------------------- 400 04203a9c bus_info_length 4, crc_length 32, crc 15004 404 31333934 bus_name "1394" 408 e064a002 irmc 1, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 10 (2048) 40c 00a07e01 company_id 00a07e | 410 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 root directory ----------------------------------------------------------------- 414 0005d08c directory_length 5, crc 53388 418 0300a07e vendor 41c 8100000c --> descriptor leaf at 44c 420 0c008380 node capabilities 424 8d000002 --> eui-64 leaf at 42c 428 d1000004 --> unit directory at 438 eui-64 leaf at 42c ----------------------------------------------------------------- 42c 0002410f leaf_length 2, crc 16655 430 00a07e01 company_id 00a07e | 434 00085257 device_id 0100085257 | EUI-64 00a07e0100085257 unit directory at 438 ----------------------------------------------------------------- 438 0004d6c9 directory_length 4, crc 54985 43c 1200a02d specifier id: 1394 TA 440 13014001 version: Vender Unique and AV/C 444 17000001 model 448 81000009 --> descriptor leaf at 46c descriptor leaf at 44c ----------------------------------------------------------------- 44c 00077205 leaf_length 7, crc 29189 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 41766964 "Avid" 45c 20546563 " Tec" 460 686e6f6c "hnol" 464 6f677900 "ogy" 468 00000000 descriptor leaf at 46c ----------------------------------------------------------------- 46c 000599a5 leaf_length 5, crc 39333 470 00000000 textual descriptor 474 00000000 minimal ASCII 478 41647265 "Adre" 47c 6e616c69 "nali" 480 6e650000 "ne" Reported-by: -
Takashi Sakamoto authored
Tascam FE-8 is known to support communication by asynchronous transaction only. The support can be implemented in userspace application and snd-firewire-ctl-services project has the support. However, ALSA firewire-tascam driver is bound to the model. This commit changes device entries so that the model is excluded. In a commit 53b3ffee ("ALSA: firewire-tascam: change device probing processing"), I addressed to the concern that version field in configuration differs depending on installed firmware. However, as long as I checked, the version number is fixed. It's safe to return version number back to modalias. Fixes: 53b3ffee ("ALSA: firewire-tascam: change device probing processing") Cc: <stable@vger.kernel.org> # 4.4+ Signed-off-by:
-
- Jul 07, 2020
-
-
Pierre-Louis Bossart authored
Fix W=1 warning. Remove excess function parameter from description Fixes: 7bc93821 ("ALSA: firewire-lib: split allocation of isochronous resources from establishment of connection") Acked-by:
-
- Jun 15, 2020
-
-
Takashi Sakamoto authored
It costs expensive to change clock configuration for models of protocol version 3. In current implementation, speculative strategy is used to finish the operation; just waiting for 4 seconds. As long as I investigate, when accepting and changing clock status actually, the device sends notification with mask. This commit uses wise way to wait for the notification after changing sampling clock rate during 4 seconds. Signed-off-by:
-
- May 25, 2020
-
-
Takashi Sakamoto authored
UltraLite-mk3 was shipped 2008 by MOTU. This model has two lineups; FireWire-only and FireWire/USB2.0 Hybrid model. Additionally, the latter has two variants in respect of the type of IEEE 1394 connector; alpha and beta connector. This commit adds support for the FireWire-only model, which is already discontinued. $ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0410353a bus_info_length 4, crc_length 16, crc 13626 404 31333934 bus_name "1394" 408 20ff7000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 255, max_rec 7 (256) 40c 0001f200 company_id 0001f2 | 410 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7 root directory ----------------------------------------------------------------- 414 0004ef04 directory_length 4, crc 61188 418 030001f2 vendor 41c 0c0083c0 node capabilities per IEEE 1394 420 d1000002 --> unit directory at 428 424 8d000005 --> eui-64 leaf at 438 unit directory at 428 ----------------------------------------------------------------- 428 00035556 directory_length 3, crc 21846 42c 120001f2 specifier id 430 13000019 version 434 17100800 model eui-64 leaf at 438 ----------------------------------------------------------------- 438 0002f3c5 leaf_length 2, crc 62405 43c 0001f200 company_id 0001f2 | 440 000902c7 device_id 00000902c7 | EUI-64 0001f200000902c7 Signed-off-by:
-
- May 22, 2020
-
-
Takashi Sakamoto authored
This commit splits the method to switch fetching mode for protocol version 2 so that model-dependent operations are explicitly defined. Signed-off-by:
-
Takashi Sakamoto authored
This commit splits the method to get clock source for protocol version 3 so that model-dependent operations are explicitly defined. Signed-off-by:
-
Takashi Sakamoto authored
This commit splits the method to get clock source for protocol version 2 so that model-dependent operations are explicitly defined. Signed-off-by:
-
Takashi Sakamoto authored
The way to decide CIP payload size by calculation with any flag is now obsoleted. This commit removes the codes. Signed-off-by:
-
Takashi Sakamoto authored
This commit uses table-based calculation of packet formats for stream management. Signed-off-by:
-
Takashi Sakamoto authored
This commit uses table-based calculation of packet formats for proc nodes. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds alternative functions to detect packet format so that each function corresponds to each model. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds alternative functions to detect packet format so that each function corresponds to each model. Signed-off-by:
-
Takashi Sakamoto authored
In MOTU protocol, data block consists of SPH and 24-bit chunks aligned to quadlet. The number of chunks per data block is specific to model. For models with optical interface, the number differs depending on I/O settings for the interface (ADAT, TOSLINK). Currently the number is calculated from flags in model-specific data. However this is weak in the case that the model has quirks. Actually, for quirks of some models, flags are used against their original meanings. This commit adds model-specific table of chunk count. For future integration, this table is based on the calculation. Signed-off-by:
-
Takashi Sakamoto authored
Now protocol structure becomes useless. This commit drops it. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds helper functions which wraps function call for each protocol. Signed-off-by:
-
Takashi Sakamoto authored
This commit adds enumerations of protocol version to localize protocol data. Signed-off-by:
-
Takashi Sakamoto authored
The most of members in spec data is used in each protocol file. It's better to capsulate the data to the file. This commit moves the data to the file for protocol version 3. Signed-off-by:
-
Takashi Sakamoto authored
The most of members in spec data is used in each protocol file. It's better to capsulate the data to the file. This commit moves the data to the file for protocol version 2. Signed-off-by:
-
- May 11, 2020
-
-
Takashi Sakamoto authored
This is trivial commit but fulfill missing entries in Kconfig for devices supported by ALSA firewire-motu driver. Signed-off-by:
-
- May 10, 2020
-
-
Takashi Sakamoto authored
Fireface UFX was shipped by RME GmbH in 2010, and now discontinued. Although this model has some enhanced feature which Fireface 802 doesn't have (e.g. on-board USB mass storage device class, configuration interface with color display), the functionality relevant to packet communication on IEEE 1394 bus seems to be the same as Fireface 802 (e.g. available number of channels for PCM frame in each sampling transfer frequency). With the assumption, this commit adds support for Fireface UFX. In ALSA fireface driver, these two models are handled as the same one. Signed-off-by:
-
Takashi Sakamoto authored
Fireface 802 was shipped by RME GmbH in 2014. This model supports later protocol for management of isochronous communication and synchronization of sampling transmission frequency. This model consists of below ICs: * TI TSB41AB2 * Xilinx Spartan-6 FPGA XC6SLX16 * TI TMS320 C6747 * SMSC USB3250 Especially, this model just supports IEEE 1394a, against its name which evokes Fireface 800. This commit adds support for Fireface 802 (tested). Userspace applications can transfer PCM frames and MIDI messages via ALSA PCM/Rawmidi interface. I note that 4 channels for ADAt1 and ADAT2 are disabled at higher sampling transfer frequency since isochronous resources reservation fails due to bandwidth limitation of IEEE 1394a. The value read from LATTER_SYNC_STATUS register is slightly different from the one of Fireface UCX. The higher 4 bits and lower 4 bits are swapped within the same byte. Without any assist of userspace application, transmitted MIDI messages from the device are not going to be processed. For detail, please refer to my comment in code of latter protocol. $ python crpp < /sys/bus/firewire/devices/fw1/config_rom ROM header and bus information block ----------------------------------------------------------------- 400 0404ffff bus_info_length 4, crc_length 4, crc 65535 (should be 26805) 404 31333934 bus_name "1394" 408 20008000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 8 (512) 40c 000a3504 company_id 000a35 | 410 38077423 device_id 0438077423 | EUI-64 000a350438077423 root directory ----------------------------------------------------------------- 414 0005ffff directory_length 5, crc 65535 (should be 9514) 418 0c0083c0 node capabilities per IEEE 1394 41c 03000a35 vendor 420 8100000b --> descriptor leaf at 44c 424 8d000007 --> eui-64 leaf at 440 428 d1000001 --> unit directory at 42c unit directory at 42c ----------------------------------------------------------------- 42c 0004ffff directory_length 4, crc 65535 (should be 45134) 430 12000a35 specifier id 434 13000005 version 438 17101800 model 43c 81000008 --> descriptor leaf at 45c eui-64 leaf at 440 ----------------------------------------------------------------- 440 0002ffff leaf_length 2, crc 65535 (should be 60131) 444 000a3504 company_id 000a35 | 448 38077423 device_id 0438077423 | EUI-64 000a350438077423 descriptor leaf at 44c ----------------------------------------------------------------- 44c 0003ffff leaf_length 3, crc 65535 (should be 469) 450 00000000 textual descriptor 454 00000000 minimal ASCII 458 524d4521 "RME!" descriptor leaf at 45c ----------------------------------------------------------------- 45c 0005ffff leaf_length 5, crc 65535 (should be 10561) 460 00000000 textual descriptor 464 00000000 minimal ASCII 468 46697265 "Fire" 46c 66616365 "face" 470 20383032 " 802" Signed-off-by: -
Takashi Sakamoto authored
This commit uses enumeration constants as index of table for the list of name of sound card. Signed-off-by:
-
Takashi Sakamoto authored
In RME fireface series, version field of unit directory in configuration ROM is used to distinguish each model. The value of field is known and it's better to use enumeration constants for code representation. This commit adds enumeration constants for model identification. Signed-off-by:
-
Takashi Sakamoto authored
In the latter models of RME Fireface series, device start to transfer packets several dozens of milliseconds. On the other hand, ALSA fireface driver starts IR context 2 milliseconds after the start. This results in loss to handle incoming packets on the context. This commit changes to start IR context immediately instead of postponement. For Fireface 800, this affects nothing because the device transfer packets 100 milliseconds or so after the start and this is within wait timeout. Cc: <stable@vger.kernel.org> Fixes: acfedcbe ("ALSA: firewire-lib: postpone to start IR context") Signed-off-by:
-
Takashi Sakamoto authored
128000 and 192000 are congruence modulo 32000, thus it's wrong to distinguish them as multiple of 32000 and 48000 by modulo 32000 at first. Additionally, used condition statement to detect quadruple speed can cause missing bit flag. Furthermore, counter to ensure the configuration is wrong and it causes false positive. This commit fixes the above three bugs. Cc: <stable@vger.kernel.org> Fixes: 60aec494 ("ALSA: fireface: support allocate_resources operation in latter protocol") Signed-off-by:
-
- May 08, 2020
-
-
Takashi Sakamoto authored
In previous commit, the sequence of syt offset and the number of data blocks per packet is calculated for pool in AMDTP domain structure in advance of processing outgoing packets. This commit uses the sequence for outgoing packet processing to obsolete per-stream processing of the sequence. Signed-off-by:
-
Takashi Sakamoto authored
In current implementation, sequence of syt offset and the number of data blocks is generated when packets for outgoing stream are going to be queued. This commit generates and pools the sequence independently of the processing of outgoing packets for future extension. Signed-off-by:
-
Takashi Sakamoto authored
For future extension, storage is required to store packet sequence in incoming AMDTP stream to recover media clock for outgoing AMDTP stream. This commit adds the storage to AMDTP domain for this purpose. The packet sequence is represented by 'struct seq_desc' which has two members; syt_offset and the number of data blocks. The size of storage is decided according to the size of packet queue. Signed-off-by:
-
Takashi Sakamoto authored
When calculating the number of data blocks per packet, some states are stored in AMDTP stream structure. This is inconvenient when reuse the calculation from non-stream structure. This commit applies refactoring to helper function for the calculation so that the function doesn't touch AMDTP stream structure. Signed-off-by:
-
Takashi Sakamoto authored
When calculating syt offset, some states are stored in AMDTP stream structure. This is inconvenient when reuse the calculation from non-stream structure. This commit applies refactoring to helper function for the calculation so that the function doesn't touch AMDTP stream structure. Signed-off-by:
-
Takashi Sakamoto authored
In current implementation for outgoing AMDTP packet, the value of syt field in CIP header is computed when calculating syt offset. For future extension, it's convenient to split the computation and calculation. This commit splits them. Signed-off-by:
-
Takashi Sakamoto authored
Although the parameter for packet queue and IRQ timing is calculated when AMDTP stream starts, the calculated parameters are the same between streams in AMDTP domain. This commit moves the calculation and decide the parameters when AMDTP domain starts. Signed-off-by:
-
Takashi Sakamoto authored
In current implementation, AMDTP domain structure and AMDTP stream structure has one way of reference from the former to the latter. For future extension, bidirectional reference is needed. This commit adds a member into stream structure to refer to domain structure to which the stream belongs. Signed-off-by:
-
Takashi Sakamoto authored
In descriptor of isochronous context in 1394 OHCI, the field of second has 3 bit, thus the maximum value is 8. The value is used for correct cycle calculation. This commit replaces hard-coded value with macro to obsolete magic number. Signed-off-by:
-