Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- Dec 08, 2021
-
-
Maxime Ripard authored
commit d134c5ff upstream. Commit 9ec03d7f ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a wait on the previous commit done on a given HVS FIFO. However, we never cleared that pointer once done. Since drm_crtc_commit_put can free the drm_crtc_commit structure directly if we were the last user, this means that it can lead to a use-after free if we were to duplicate the state, and that stale pointer would even be copied to the new state. Set the pointer to NULL once we're done with the wait so that we don't carry over a pointer to a free'd structure. Fixes: 9ec03d7f ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by:
-
Maxime Ripard authored
commit 049cfff8 upstream. Commit 9ec03d7f ("drm/vc4: kms: Wait on previous FIFO users before a commit") introduced a global state for the HVS, with each FIFO storing the current CRTC commit so that we can properly synchronize commits. However, the refcounting was off and we thus ended up leaking the drm_crtc_commit structure every commit. Add a drm_crtc_commit_put to prevent the leakage. Fixes: 9ec03d7f ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by:
-
Maxime Ripard authored
commit f9277679 upstream. The HVS global state functions return an error pointer, but in most cases we check if it's NULL, possibly resulting in an invalid pointer dereference. Fixes: 9ec03d7f ("drm/vc4: kms: Wait on previous FIFO users before a commit") Signed-off-by:
-
Maxime Ripard authored
commit 0c980a00 upstream. Several DRM/KMS atomic commits can run in parallel if they affect different CRTC. These commits share the global HVS state, so we have some code to make sure we run commits in sequence. This synchronization code is one of the first thing that runs in vc4_atomic_commit_tail(). Another constraints we have is that we need to make sure the HVS clock gets a boost during the commit. That code relies on clk_set_min_rate and will remove the old minimum and set a new one. We also need another, temporary, minimum for the duration of the commit. The algorithm is thus to set a temporary minimum, drop the previous one, do the commit, and finally set the minimum for the current mode. However, the part that sets the temporary minimum and drops the older one runs before the commit synchronization code. Thus, under the proper conditions, we can end up mixing up the minimums and ending up with the wrong one for our current step. To avoid it, let's move the clock setup in the protected section. Fixes: d7d96c00 ("drm/vc4: hvs: Boost the core clock during modeset") Signed-off-by:
-
Rob Clark authored
commit e4840d53 upstream. In particular, we need to ensure all the necessary blocks are switched to 64b mode (a5xx+) otherwise the high bits of the address of the BO to snapshot state into will be ignored, resulting in: *** gpu fault: ttbr0=0000000000000000 iova=0000000000012000 dir=READ type=TRANSLATION source=CP (0,0,0,0) platform 506a000.gmu: [drm:a6xx_gmu_set_oob] *ERROR* Timeout waiting for GMU OOB set BOOT_SLUMBER: 0x0 Fixes: 4f776f45 ("drm/msm/gpu: Convert the GPU show function to use the GPU state") Signed-off-by:
-
Douglas Anderson authored
commit b4d25abf upstream. In commit 142639a5 ("drm/msm/a6xx: fix crashstate capture for A650") we changed a6xx_get_gmu_registers() to read 3 sets of registers. Unfortunately, we didn't change the memory allocation for the array. That leads to a KASAN warning (this was on the chromeos-5.4 kernel, which has the problematic commit backported to it): BUG: KASAN: slab-out-of-bounds in _a6xx_get_gmu_registers+0x144/0x430 Write of size 8 at addr ffffff80c89432b0 by task A618-worker/209 CPU: 5 PID: 209 Comm: A618-worker Tainted: G W 5.4.156-lockdep #22 Hardware name: Google Lazor Limozeen without Touchscreen (rev5 - rev8) (DT) Call trace: dump_backtrace+0x0/0x248 show_stack+0x20/0x2c dump_stack+0x128/0x1ec print_address_description+0x88/0x4a0 __kasan_report+0xfc/0x120 kasan_report+0x10/0x18 __asan_report_store8_noabort+0x1c/0x24 _a6xx_get_gmu_registers+0x144/0x430 a6xx_gpu_state_get+0x330/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Allocated by task 209: __kasan_kmalloc+0xfc/0x1c4 kasan_kmalloc+0xc/0x14 kmem_cache_alloc_trace+0x1f0/0x2a0 a6xx_gpu_state_get+0x164/0x25d4 msm_gpu_crashstate_capture+0xa0/0x84c recover_worker+0x328/0x838 kthread_worker_fn+0x32c/0x574 kthread+0x2dc/0x39c ret_from_fork+0x10/0x18 Fixes: 142639a5 ("drm/msm/a6xx: fix crashstate capture for A650") Signed-off-by:
-
Tony Lu authored
commit 00e158fb upstream. When smc_close_final() returns error, the return code overwrites by kernel_sock_shutdown() in smc_close_active(). The return code of smc_close_final() is more important than kernel_sock_shutdown(), and it will pass to userspace directly. Fix it by keeping both return codes, if smc_close_final() raises an error, return it or kernel_sock_shutdown()'s. Link: https://lore.kernel.org/linux-s390/1f67548e-cbf6-0dce-82b5-10288a4583bd@linux.ibm.com/ Fixes: 606a63c9 ("net/smc: Ensure the active closing peer first closes clcsock") Suggested-by:
-
William Kucharski authored
commit 19f36edf upstream. Correct an error where setting /proc/sys/net/rds/tcp/rds_tcp_rcvbuf would instead modify the socket's sk_sndbuf and would leave sk_rcvbuf untouched. Fixes: c6a58ffe ("RDS: TCP: Add sysctl tunables for sndbuf/rcvbuf on rds-tcp socket") Signed-off-by:
-
Dust Li authored
commit 789b6cc2 upstream. smc_lgr_cleanup_early() meant to delete the link group from the link group list, but it deleted the list head by mistake. This may cause memory corruption since we didn't remove the real link group from the list and later memseted the link group structure. We got a list corruption panic when testing: [ 231.277259] list_del corruption. prev->next should be ffff8881398a8000, but was 0000000000000000 [ 231.278222] ------------[ cut here ]------------ [ 231.278726] kernel BUG at lib/list_debug.c:53! [ 231.279326] invalid opcode: 0000 [#1] SMP NOPTI [ 231.279803] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.46+ #435 [ 231.280466] Hardware name: Alibaba Cloud ECS, BIOS 8c24b4c 04/01/2014 [ 231.281248] Workqueue: events smc_link_down_work [ 231.281732] RIP: 0010:__list_del_entry_valid+0x70/0x90 [ 231.282258] Code: 4c 60 82 e8 7d cc 6a 00 0f 0b 48 89 fe 48 c7 c7 88 4c 60 82 e8 6c cc 6a 00 0f 0b 48 89 fe 48 c7 c7 c0 4c 60 82 e8 5b cc 6a 00 <0f> 0b 48 89 fe 48 c7 c7 00 4d 60 82 e8 4a cc 6a 00 0f 0b cc cc cc [ 231.284146] RSP: 0018:ffffc90000033d58 EFLAGS: 00010292 [ 231.284685] RAX: 0000000000000054 RBX: ffff8881398a8000 RCX: 0000000000000000 [ 231.285415] RDX: 0000000000000001 RSI: ffff88813bc18040 RDI: ffff88813bc18040 [ 231.286141] RBP: ffffffff8305ad40 R08: 0000000000000003 R09: 0000000000000001 [ 231.286873] R10: ffffffff82803da0 R11: ffffc90000033b90 R12: 0000000000000001 [ 231.287606] R13: 0000000000000000 R14: ffff8881398a8000 R15: 0000000000000003 [ 231.288337] FS: 0000000000000000(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 [ 231.289160] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 231.289754] CR2: 0000000000e72058 CR3: 000000010fa96006 CR4: 00000000003706f0 [ 231.290485] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 231.291211] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 231.291940] Call Trace: [ 231.292211] smc_lgr_terminate_sched+0x53/0xa0 [ 231.292677] smc_switch_conns+0x75/0x6b0 [ 231.293085] ? update_load_avg+0x1a6/0x590 [ 231.293517] ? ttwu_do_wakeup+0x17/0x150 [ 231.293907] ? update_load_avg+0x1a6/0x590 [ 231.294317] ? newidle_balance+0xca/0x3d0 [ 231.294716] smcr_link_down+0x50/0x1a0 [ 231.295090] ? __wake_up_common_lock+0x77/0x90 [ 231.295534] smc_link_down_work+0x46/0x60 [ 231.295933] process_one_work+0x18b/0x350 Fixes: a0a62ee1 ("net/smc: separate locks for SMCD and SMCR link group lists") Signed-off-by:
-
Eric Dumazet authored
commit 213f5f8f upstream. Before commit faa041a4 ("ipv4: Create cleanup helper for fib_nh") changes to net->ipv4.fib_num_tclassid_users were protected by RTNL. After the change, this is no longer the case, as free_fib_info_rcu() runs after rcu grace period, without rtnl being held. Fixes: faa041a4 ("ipv4: Create cleanup helper for fib_nh") Signed-off-by:
-
Eric Dumazet authored
commit 7a10d8c8 upstream. syzbot found that __dev_queue_xmit() is reading txq->xmit_lock_owner without annotations. No serious issue there, let's document what is happening there. BUG: KCSAN: data-race in __dev_queue_xmit / __dev_queue_xmit write to 0xffff888139d09484 of 4 bytes by interrupt on cpu 0: __netif_tx_unlock include/linux/netdevice.h:4437 [inline] __dev_queue_xmit+0x948/0xf70 net/core/dev.c:4229 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_hh_output include/net/neighbour.h:511 [inline] neigh_output include/net/neighbour.h:525 [inline] ip6_finish_output2+0x995/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x3e/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 read to 0xffff888139d09484 of 4 bytes by interrupt on cpu 1: __dev_queue_xmit+0x5e3/0xf70 net/core/dev.c:4213 dev_queue_xmit_accel+0x19/0x20 net/core/dev.c:4265 macvlan_queue_xmit drivers/net/macvlan.c:543 [inline] macvlan_start_xmit+0x2b3/0x3d0 drivers/net/macvlan.c:567 __netdev_start_xmit include/linux/netdevice.h:4987 [inline] netdev_start_xmit include/linux/netdevice.h:5001 [inline] xmit_one+0x105/0x2f0 net/core/dev.c:3590 dev_hard_start_xmit+0x72/0x120 net/core/dev.c:3606 sch_direct_xmit+0x1b2/0x7c0 net/sched/sch_generic.c:342 __dev_xmit_skb+0x83d/0x1370 net/core/dev.c:3817 __dev_queue_xmit+0x590/0xf70 net/core/dev.c:4194 dev_queue_xmit+0x13/0x20 net/core/dev.c:4259 neigh_resolve_output+0x3db/0x410 net/core/neighbour.c:1523 neigh_output include/net/neighbour.h:527 [inline] ip6_finish_output2+0x9be/0xbb0 net/ipv6/ip6_output.c:126 __ip6_finish_output net/ipv6/ip6_output.c:191 [inline] ip6_finish_output+0x444/0x4c0 net/ipv6/ip6_output.c:201 NF_HOOK_COND include/linux/netfilter.h:296 [inline] ip6_output+0x10e/0x210 net/ipv6/ip6_output.c:224 dst_output include/net/dst.h:450 [inline] NF_HOOK include/linux/netfilter.h:307 [inline] ndisc_send_skb+0x486/0x610 net/ipv6/ndisc.c:508 ndisc_send_rs+0x3b0/0x3e0 net/ipv6/ndisc.c:702 addrconf_rs_timer+0x370/0x540 net/ipv6/addrconf.c:3898 call_timer_fn+0x2e/0x240 kernel/time/timer.c:1421 expire_timers+0x116/0x240 kernel/time/timer.c:1466 __run_timers+0x368/0x410 kernel/time/timer.c:1734 run_timer_softirq+0x2e/0x60 kernel/time/timer.c:1747 __do_softirq+0x158/0x2de kernel/softirq.c:558 __irq_exit_rcu kernel/softirq.c:636 [inline] irq_exit_rcu+0x37/0x70 kernel/softirq.c:648 sysvec_apic_timer_interrupt+0x8d/0xb0 arch/x86/kernel/apic/apic.c:1097 asm_sysvec_apic_timer_interrupt+0x12/0x20 kcsan_setup_watchpoint+0x94/0x420 kernel/kcsan/core.c:443 folio_test_anon include/linux/page-flags.h:581 [inline] PageAnon include/linux/page-flags.h:586 [inline] zap_pte_range+0x5ac/0x10e0 mm/memory.c:1347 zap_pmd_range mm/memory.c:1467 [inline] zap_pud_range mm/memory.c:1496 [inline] zap_p4d_range mm/memory.c:1517 [inline] unmap_page_range+0x2dc/0x3d0 mm/memory.c:1538 unmap_single_vma+0x157/0x210 mm/memory.c:1583 unmap_vmas+0xd0/0x180 mm/memory.c:1615 exit_mmap+0x23d/0x470 mm/mmap.c:3170 __mmput+0x27/0x1b0 kernel/fork.c:1113 mmput+0x3d/0x50 kernel/fork.c:1134 exit_mm+0xdb/0x170 kernel/exit.c:507 do_exit+0x608/0x17a0 kernel/exit.c:819 do_group_exit+0xce/0x180 kernel/exit.c:929 get_signal+0xfc3/0x1550 kernel/signal.c:2852 arch_do_signal_or_restart+0x8c/0x2e0 arch/x86/kernel/signal.c:868 handle_signal_work kernel/entry/common.c:148 [inline] exit_to_user_mode_loop kernel/entry/common.c:172 [inline] exit_to_user_mode_prepare+0x113/0x190 kernel/entry/common.c:207 __syscall_exit_to_user_mode_work kernel/entry/common.c:289 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:300 do_syscall_64+0x50/0xd0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0xffffffff Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 28712 Comm: syz-executor.0 Tainted: G W 5.16.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Zhou Qingyang authored
commit e07a097b upstream. In rvu_mbox_init(), mbox_regions is not freed or passed out under the switch-default region, which could lead to a memory leak. Fix this bug by changing 'return err' to 'goto free_regions'. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_OCTEONTX2_AF=y show no new warnings, and our static analyzer no longer warns about this code. Fixes: 98c56111 (“octeontx2-af: cn10k: Add mbox support for CN10K platform”) Signed-off-by:
-
Dongliang Mu authored
commit f4a8adbf upstream. The commit c5521189 ("dpaa2-eth: support PTP Sync packet one-step timestamping") forgets to destroy workqueue at the end of remove function. Fix this by adding destroy_workqueue before fsl_mc_portal_free and free_netdev. Fixes: c5521189 ("dpaa2-eth: support PTP Sync packet one-step timestamping") Signed-off-by:
-
Christophe JAILLET authored
commit b83f5ac7 upstream. 'bitmap_fill()' fills a bitmap one 'long' at a time. It is likely that an exact number of bits is expected. Use 'bitmap_set()' instead in order not to set unexpected bits. Fixes: e531f767 ("net: mvpp2: handle cases where more CPUs are available than s/w threads") Signed-off-by:
-
Sven Schuchmann authored
commit 817b6531 upstream. On most systems request for IRQ 0 will fail, phylib will print an error message and fall back to polling. To fix this set the phydev->irq to PHY_POLL if no IRQ is available. Fixes: cc89c323 ("lan78xx: Use irq_domain for phy interrupt from USB Int. EP") Reviewed-by:
-
Vincent Whitchurch authored
commit f8e7dfd6 upstream. The driver assumes that split headers can be enabled/disabled without stopping/starting the device, so it writes DMA_CHAN_CONTROL from stmmac_set_features(). However, on my system (IP v5.10a without Split Header support), simply writing DMA_CHAN_CONTROL when DMA is running (for example, with the commands below) leads to a TX watchdog timeout. host$ socat TCP-LISTEN:1024,fork,reuseaddr - & device$ ethtool -K eth0 tso off device$ ethtool -K eth0 tso on device$ dd if=/dev/zero bs=1M count=10 | socat - TCP4:host:1024 <tx watchdog timeout> Note that since my IP is configured without Split Header support, the driver always just reads and writes the same value to the DMA_CHAN_CONTROL register. I don't have access to any platforms with Split Header support so I don't know if these writes to the DMA_CHAN_CONTROL while DMA is running actually work properly on such systems. I could not find anything in the databook that says that DMA_CHAN_CONTROL should not be written when the DMA is running. But on systems without Split Header support, there is in any case no need to call enable_sph() in stmmac_set_features() at all since SPH can never be toggled, so we can avoid the watchdog timeout there by skipping this call. Fixes: 8c6fc097 ("net: stmmac: gmac4+: Add Split Header support") Signed-off-by:
-
Pierre-Louis Bossart authored
commit ae26c08e upstream. We've added quirks for ESS8336 but missed CML, add quirks for both LP and H versions. BugLink: https://github.com/thesofproject/linux/issues/3248 Fixes: 9d36ceab ("ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec") Signed-off-by:
-
Eiichi Tsukata authored
commit beacff50 upstream. Need to call rxrpc_put_local() for peer candidate before kfree() as it holds a ref to rxrpc_local. [DH: v2: Changed to abstract the peer freeing code out into a function] Fixes: 9ebeddef ("rxrpc: rxrpc_peer needs to hold a ref on the rxrpc_local record") Signed-off-by:
-
Eiichi Tsukata authored
commit ca77fba8 upstream. Need to call rxrpc_put_peer() for bundle candidate before kfree() as it holds a ref to rxrpc_peer. [DH: v2: Changed to abstract out the bundle freeing code into a function] Fixes: 245500d8 ("rxrpc: Rewrite the client connection manager") Signed-off-by:
-
Sameer Pujar authored
commit a4e37950 upstream. The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the AHUB driver accordingly. Fixes: 16e1bcc2 ("ASoC: tegra: Add Tegra210 based AHUB driver") Signed-off-by:
-
Sameer Pujar authored
commit d6202a57 upstream. The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the DSPK driver accordingly. Fixes: 327ef647 ("ASoC: tegra: Add Tegra186 based DSPK driver") Suggested-by:
-
Sameer Pujar authored
commit a347dfa1 upstream. The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the DMIC driver accordingly. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Suggested-by:
-
Sameer Pujar authored
commit f21a9df3 upstream. The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the I2S driver accordingly. Fixes: c0bfa983 ("ASoC: tegra: Add Tegra210 based I2S driver") Suggested-by:
-
Sameer Pujar authored
commit e2b87a18 upstream. The kcontrol put callback is expected to return 1 when there is change in HW or when the update is acknowledged by driver. This would ensure that change notifications are sent to subscribed applications. Update the ADMAIF driver accordingly. Fixes: f74028e1 ("ASoC: tegra: Add Tegra210 based ADMAIF driver") Suggested-by:
-
Sameer Pujar authored
commit 3aa0d5c8 upstream. The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 327ef647 ("ASoC: tegra: Add Tegra186 based DSPK driver") Suggested-by:
-
Sameer Pujar authored
commit 559d2345 upstream. The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: 8c8ff982 ("ASoC: tegra: Add Tegra210 based DMIC driver") Suggested-by:
-
Sameer Pujar authored
commit 8a2c2fa0 upstream. The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: c0bfa983 ("ASoC: tegra: Add Tegra210 based I2S driver") Suggested-by:
-
Sameer Pujar authored
commit 884c6cb3 upstream. The enum controls are expected to use enumerated value type. Update relevant references in control get/put callbacks. Fixes: f74028e1 ("ASoC: tegra: Add Tegra210 based ADMAIF driver") Suggested-by:
-
Lorenzo Bianconi authored
commit 6e53d6d2 upstream. Fix the following NULL pointer dereference in mt7915_get_phy_mode routine adding an ibss interface to the mt7915 driver. [ 101.137097] wlan0: Trigger new scan to find an IBSS to join [ 102.827039] wlan0: Creating new IBSS network, BSSID 26:a4:50:1a:6e:69 [ 103.064756] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 103.073670] Mem abort info: [ 103.076520] ESR = 0x96000005 [ 103.079614] EC = 0x25: DABT (current EL), IL = 32 bits [ 103.084934] SET = 0, FnV = 0 [ 103.088042] EA = 0, S1PTW = 0 [ 103.091215] Data abort info: [ 103.094104] ISV = 0, ISS = 0x00000005 [ 103.098041] CM = 0, WnR = 0 [ 103.101044] user pgtable: 4k pages, 39-bit VAs, pgdp=00000000460b1000 [ 103.107565] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 [ 103.116590] Internal error: Oops: 96000005 [#1] SMP [ 103.189066] CPU: 1 PID: 333 Comm: kworker/u4:3 Not tainted 5.10.75 #0 [ 103.195498] Hardware name: MediaTek MT7622 RFB1 board (DT) [ 103.201124] Workqueue: phy0 ieee80211_iface_work [mac80211] [ 103.206695] pstate: 20000005 (nzCv daif -PAN -UAO -TCO BTYPE=--) [ 103.212705] pc : mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.218103] lr : mt7915_mcu_add_bss_info+0x11c/0x760 [mt7915e] [ 103.223927] sp : ffffffc011cdb9e0 [ 103.227235] x29: ffffffc011cdb9e0 x28: ffffff8006563098 [ 103.232545] x27: ffffff8005f4da22 x26: ffffff800685ac40 [ 103.237855] x25: 0000000000000001 x24: 000000000000011f [ 103.243165] x23: ffffff8005f4e260 x22: ffffff8006567918 [ 103.248475] x21: ffffff8005f4df80 x20: ffffff800685ac58 [ 103.253785] x19: ffffff8006744400 x18: 0000000000000000 [ 103.259094] x17: 0000000000000000 x16: 0000000000000001 [ 103.264403] x15: 000899c3a2d9d2e4 x14: 000899bdc3c3a1c8 [ 103.269713] x13: 0000000000000000 x12: 0000000000000000 [ 103.275024] x11: ffffffc010e30c20 x10: 0000000000000000 [ 103.280333] x9 : 0000000000000050 x8 : ffffff8006567d88 [ 103.285642] x7 : ffffff8006563b5c x6 : ffffff8006563b44 [ 103.290952] x5 : 0000000000000002 x4 : 0000000000000001 [ 103.296262] x3 : 0000000000000001 x2 : 0000000000000001 [ 103.301572] x1 : 0000000000000000 x0 : 0000000000000011 [ 103.306882] Call trace: [ 103.309328] mt7915_get_phy_mode+0x68/0x120 [mt7915e] [ 103.314378] mt7915_bss_info_changed+0x198/0x200 [mt7915e] [ 103.319941] ieee80211_bss_info_change_notify+0x128/0x290 [mac80211] [ 103.326360] __ieee80211_sta_join_ibss+0x308/0x6c4 [mac80211] [ 103.332171] ieee80211_sta_create_ibss+0x8c/0x10c [mac80211] [ 103.337895] ieee80211_ibss_work+0x3dc/0x614 [mac80211] [ 103.343185] ieee80211_iface_work+0x388/0x3f0 [mac80211] [ 103.348495] process_one_work+0x288/0x690 [ 103.352499] worker_thread+0x70/0x464 [ 103.356157] kthread+0x144/0x150 [ 103.359380] ret_from_fork+0x10/0x18 [ 103.362952] Code: 394008c3 52800220 394000e4 7100007f (39400023) Fixes: 37f4ca90 ("mt76: mt7915: register per-phy HE capabilities for each interface") Fixes: e57b7901 ("mt76: add mac80211 driver for MT7915 PCIe-based chipsets") Signed-off-by:
-
Florian Fainelli authored
commit 88362ebf upstream. Currently autoloading for SPI devices does not use the DT ID table, it uses SPI modalises. Supporting OF modalises is going to be difficult if not impractical, an attempt was made but has been reverted, so ensure that module autoloading works for this driver by adding an id_table listing the SPI IDs for everything. Fixes: 96c8395e ("spi: Revert modalias changes") Signed-off-by:
-
Li Zhijian authored
commit a05431b2 upstream. ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test would not be run by default due to the wrong case names Fixes: 34d0302a ("selftests: Add ipv6 address bind tests to fcnal-test") Fixes: 75b2b2b3 ("selftests: Add ipv4 address bind tests to fcnal-test") Signed-off-by:
-
Zhou Qingyang authored
commit addad764 upstream. In mlx4_en_try_alloc_resources(), mlx4_en_copy_priv() is called and tmp->tx_cq will be freed on the error path of mlx4_en_copy_priv(). After that mlx4_en_alloc_resources() is called and there is a dereference of &tmp->tx_cq[t][i] in mlx4_en_alloc_resources(), which could lead to a use after free problem on failure of mlx4_en_copy_priv(). Fix this bug by adding a check of mlx4_en_copy_priv() This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_MLX4_EN=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: ec25bc04 ("net/mlx4_en: Add resilience in low memory systems") Signed-off-by:
-
Raed Salem authored
commit c65d638a upstream. Current code wrongly uses the skb->protocol field which reflects the outer l3 protocol to set the inner l3 type in Software Parser (SWP) fields settings in the ethernet segment (eseg) in flows where inner l3 exists like in Vxlan over ESP flow, the above method wrongly use the outer protocol type instead of the inner one. thus breaking cases where inner and outer headers have different protocols. Fix by setting the inner l3 type in SWP according to the inner l3 ip header version. Fixes: 2ac9cfe7 ("net/mlx5e: IPSec, Add Innova IPSec offload TX data path") Signed-off-by:
-
Łukasz Bartosik authored
commit f5cecf1d upstream. Fix warnings produced by: - lockdep_assert_wiphy() in function reg_process_self_managed_hint(), - wiphy_dereference() in function iwl_mvm_init_fw_regd(). Both function are expected to be called in critical section. The warnings were discovered when running v5.15 kernel with debug options enabled: 1) Hardware name: Google Delbin/Delbin RIP: 0010:reg_process_self_managed_hint+0x254/0x347 [cfg80211] ... Call Trace: regulatory_set_wiphy_regd_sync+0x3d/0xb0 iwl_mvm_init_mcc+0x49d/0x5a2 iwl_op_mode_mvm_start+0x1b58/0x2507 ? iwl_mvm_reprobe_wk+0x94/0x94 _iwl_op_mode_start+0x146/0x1a3 iwl_opmode_register+0xda/0x13d init_module+0x28/0x1000 2) drivers/net/wireless/intel/iwlwifi/mvm/mac80211.c:263 suspicious rcu_dereference_protected() usage! ... Hardware name: Google Delbin/Delbin, BIOS Google_Delbin Call Trace: dump_stack_lvl+0xb1/0xe6 iwl_mvm_init_fw_regd+0x2e7/0x379 iwl_mvm_init_mcc+0x2c6/0x5a2 iwl_op_mode_mvm_start+0x1b58/0x2507 ? iwl_mvm_reprobe_wk+0x94/0x94 _iwl_op_mode_start+0x146/0x1a3 iwl_opmode_register+0xda/0x13d init_module+0x28/0x100 Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver") Signed-off-by:
-
Mark Rutland authored
commit 35b6b28e upstream. When branch target identifiers are in use, code reachable via an indirect branch requires a BTI landing pad at the branch target site. When building FTRACE_WITH_REGS atop patchable-function-entry, we miss BTIs at the start start of the `ftrace_caller` and `ftrace_regs_caller` trampolines, and when these are called from a module via a PLT (which will use a `BR X16`), we will encounter a BTI failure, e.g. | # insmod lkdtm.ko | lkdtm: No crash points registered, enable through debugfs | # echo function_graph > /sys/kernel/debug/tracing/current_tracer | # cat /sys/kernel/debug/provoke-crash/DIRECT | Unhandled 64-bit el1h sync exception on CPU0, ESR 0x34000001 -- BTI | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | pstate: 60400405 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=jc) | pc : ftrace_caller+0x0/0x3c | lr : lkdtm_debugfs_open+0xc/0x20 [lkdtm] | sp : ffff800012e43b00 | x29: ffff800012e43b00 x28: 0000000000000000 x27: ffff800012e43c88 | x26: 0000000000000000 x25: 0000000000000000 x24: ffff0000c171f200 | x23: ffff0000c27b1e00 x22: ffff0000c2265240 x21: ffff0000c23c8c30 | x20: ffff8000090ba380 x19: 0000000000000000 x18: 0000000000000000 | x17: 0000000000000000 x16: ffff80001002bb4c x15: 0000000000000000 | x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000900ff0 | x11: ffff0000c4166310 x10: ffff800012e43b00 x9 : ffff8000104f2384 | x8 : 0000000000000001 x7 : 0000000000000000 x6 : 000000000000003f | x5 : 0000000000000040 x4 : ffff800012e43af0 x3 : 0000000000000001 | x2 : ffff8000090b0000 x1 : ffff0000c171f200 x0 : ffff0000c23c8c30 | Kernel panic - not syncing: Unhandled exception | CPU: 0 PID: 174 Comm: cat Not tainted 5.16.0-rc2-dirty #3 | Hardware name: linux,dummy-virt (DT) | Call trace: | dump_backtrace+0x0/0x1a4 | show_stack+0x24/0x30 | dump_stack_lvl+0x68/0x84 | dump_stack+0x1c/0x38 | panic+0x168/0x360 | arm64_exit_nmi.isra.0+0x0/0x80 | el1h_64_sync_handler+0x68/0xd4 | el1h_64_sync+0x78/0x7c | ftrace_caller+0x0/0x3c | do_dentry_open+0x134/0x3b0 | vfs_open+0x38/0x44 | path_openat+0x89c/0xe40 | do_filp_open+0x8c/0x13c | do_sys_openat2+0xbc/0x174 | __arm64_sys_openat+0x6c/0xbc | invoke_syscall+0x50/0x120 | el0_svc_common.constprop.0+0xdc/0x100 | do_el0_svc+0x84/0xa0 | el0_svc+0x28/0x80 | el0t_64_sync_handler+0xa8/0x130 | el0t_64_sync+0x1a0/0x1a4 | SMP: stopping secondary CPUs | Kernel Offset: disabled | CPU features: 0x0,00000f42,da660c5f | Memory Limit: none | ---[ end Kernel panic - not syncing: Unhandled exception ]--- Fix this by adding the required `BTI C`, as we only require these to be reachable via BL for direct calls or BR X16/X17 for PLTs. For now, these are open-coded in the function prologue, matching the style of the `__hwasan_tag_mismatch` trampoline. In future we may wish to consider adding a new SYM_CODE_START_*() variant which has an implicit BTI. When ftrace is built atop mcount, the trampolines are marked with SYM_FUNC_START(), and so get an implicit BTI. We may need to change these over to SYM_CODE_START() in future for RELIABLE_STACKTRACE, in case we need to apply special care aroud the return address being rewritten. Fixes: 97fed779 ("arm64: bti: Provide Kconfig for kernel mode BTI") Signed-off-by:
-
Arnd Bergmann authored
commit f7e5b9bf upstream. On ARM v6 and later, we define CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS because the ordinary load/store instructions (ldr, ldrh, ldrb) can tolerate any misalignment of the memory address. However, load/store double and load/store multiple instructions (ldrd, ldm) may still only be used on memory addresses that are 32-bit aligned, and so we have to use the CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS macro with care, or we may end up with a severe performance hit due to alignment traps that require fixups by the kernel. Testing shows that this currently happens with clang-13 but not gcc-11. In theory, any compiler version can produce this bug or other problems, as we are dealing with undefined behavior in C99 even on architectures that support this in hardware, see also https://gcc.gnu.org/bugzilla/show_bug.cgi?id=100363. Fortunately, the get_unaligned() accessors do the right thing: when building for ARMv6 or later, the compiler will emit unaligned accesses using the ordinary load/store instructions (but avoid the ones that require 32-bit alignment). When building for older ARM, those accessors will emit the appropriate sequence of ldrb/mov/orr instructions. And on architectures that can truly tolerate any kind of misalignment, the get_unaligned() accessors resolve to the leXX_to_cpup accessors that operate on aligned addresses. Since the compiler will in fact emit ldrd or ldm instructions when building this code for ARM v6 or later, the solution is to use the unaligned accessors unconditionally on architectures where this is known to be fast. The _aligned version of the hash function is however still needed to get the best performance on architectures that cannot do any unaligned access in hardware. This new version avoids the undefined behavior and should produce the fastest hash on all architectures we support. Link: https://lore.kernel.org/linux-arm-kernel/20181008211554.5355-4-ard.biesheuvel@linaro.org/ Link: https://lore.kernel.org/linux-crypto/CAK8P3a2KfmmGDbVHULWevB0hv71P2oi2ZCHEAqT=8dQfa0=cqQ@mail.gmail.com/ Reported-by:
-
Benjamin Poirier authored
commit 7d4741ea upstream. There are various problems related to netlink notifications for mpls route changes in response to interfaces being deleted: * delete interface of only nexthop DELROUTE notification is missing RTA_OIF attribute * delete interface of non-last nexthop NEWROUTE notification is missing entirely * delete interface of last nexthop DELROUTE notification is missing nexthop All of these problems stem from the fact that existing routes are modified in-place before sending a notification. Restructure mpls_ifdown() to avoid changing the route in the DELROUTE cases and to create a copy in the NEWROUTE case. Fixes: f8efb73c ("mpls: multipath route support") Signed-off-by:
-
Zhou Qingyang authored
commit e2dabc4f upstream. In qlcnic_83xx_add_rings(), the indirect function of ahw->hw_ops->alloc_mbx_args will be called to allocate memory for cmd.req.arg, and there is a dereference of it in qlcnic_83xx_add_rings(), which could lead to a NULL pointer dereference on failure of the indirect function like qlcnic_83xx_alloc_mbx_args(). Fix this bug by adding a check of alloc_mbx_args(), this patch imitates the logic of mbx_cmd()'s failure handling. This bug was found by a static analyzer. The analysis employs differential checking to identify inconsistent security operations (e.g., checks or kfrees) between two code paths and confirms that the inconsistent operations are not recovered in the current function or the callers, so they constitute bugs. Note that, as a bug found by static analysis, it can be a false positive or hard to trigger. Multiple researchers have cross-reviewed the bug. Builds with CONFIG_QLCNIC=m show no new warnings, and our static analyzer no longer warns about this code. Fixes: 7f966452 ("qlcnic: 83xx memory map and HW access routine") Signed-off-by:
-
Paolo Abeni authored
commit dacb5d88 upstream. Steffen reported a TCP stream corruption for HTTP requests served by the apache web-server using a cifs mount-point and memory mapping the relevant file. The root cause is quite similar to the one addressed by commit 20eb4f29 ("net: fix sk_page_frag() recursion from memory reclaim"). Here the nested access to the task page frag is caused by a page fault on the (mmapped) user-space memory buffer coming from the cifs file. The page fault handler performs an smb transaction on a different socket, inside the same process context. Since sk->sk_allaction for such socket does not prevent the usage for the task_frag, the nested allocation modify "under the hood" the page frag in use by the outer sendmsg call, corrupting the stream. The overall relevant stack trace looks like the following: httpd 78268 [001] 3461630.850950: probe:tcp_sendmsg_locked: ffffffff91461d91 tcp_sendmsg_locked+0x1 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139814e sock_sendmsg+0x3e ffffffffc06dfe1d smb_send_kvec+0x28 [...] ffffffffc06cfaf8 cifs_readpages+0x213 ffffffff90e83c4b read_pages+0x6b ffffffff90e83f31 __do_page_cache_readahead+0x1c1 ffffffff90e79e98 filemap_fault+0x788 ffffffff90eb0458 __do_fault+0x38 ffffffff90eb5280 do_fault+0x1a0 ffffffff90eb7c84 __handle_mm_fault+0x4d4 ffffffff90eb8093 handle_mm_fault+0xc3 ffffffff90c74f6d __do_page_fault+0x1ed ffffffff90c75277 do_page_fault+0x37 ffffffff9160111e page_fault+0x1e ffffffff9109e7b5 copyin+0x25 ffffffff9109eb40 _copy_from_iter_full+0xe0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462370 tcp_sendmsg_locked+0x5e0 ffffffff91462b57 tcp_sendmsg+0x27 ffffffff9139815c sock_sendmsg+0x4c ffffffff913981f7 sock_write_iter+0x97 ffffffff90f2cc56 do_iter_readv_writev+0x156 ffffffff90f2dff0 do_iter_write+0x80 ffffffff90f2e1c3 vfs_writev+0xa3 ffffffff90f2e27c do_writev+0x5c ffffffff90c042bb do_syscall_64+0x5b ffffffff916000ad entry_SYSCALL_64_after_hwframe+0x65 The cifs filesystem rightfully sets sk_allocations to GFP_NOFS, we can avoid the nesting using the sk page frag for allocation lacking the __GFP_FS flag. Do not define an additional mm-helper for that, as this is strictly tied to the sk page frag usage. v1 -> v2: - use a stricted sk_page_frag() check instead of reordering the code (Eric) Reported-by:
-
Randy Dunlap authored
commit b0f38e15 upstream. Fix section mismatch warnings in xtsonic. The first one appears to be bogus and after fixing the second one, the first one is gone. WARNING: modpost: vmlinux.o(.text+0x529adc): Section mismatch in reference from the function sonic_get_stats() to the function .init.text:set_reset_devices() The function sonic_get_stats() references the function __init set_reset_devices(). This is often because sonic_get_stats lacks a __init annotation or the annotation of set_reset_devices is wrong. WARNING: modpost: vmlinux.o(.text+0x529b3b): Section mismatch in reference from the function xtsonic_probe() to the function .init.text:sonic_probe1() The function xtsonic_probe() references the function __init sonic_probe1(). This is often because xtsonic_probe lacks a __init annotation or the annotation of sonic_probe1 is wrong. Fixes: 74f2a5f0 ("xtensa: Add support for the Sonic Ethernet device for the XT2000 board.") Signed-off-by:
-