Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- May 12, 2022
-
-
Vlad Buslov authored
commit 4a2a664e upstream. Referenced change added check to skip updating fib when new fib instance has same or lower priority. However, new fib instance can be an update on same dst address as existing one even though the structure is another instance that has different address. Ignoring events on such instances causes multipath LAG state to not be correctly updated. Track 'dst' and 'dst_len' fields of fib event fib_entry_notifier_info structure and don't skip events that have the same value of that fields. Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:
-
Vlad Buslov authored
commit a6589155 upstream. Referenced change incorrectly sets single path fib_info even when LAG is not active. Fix it by moving call to mlx5_lag_fib_set() into conditional that verifies LAG state. Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:
-
Vlad Buslov authored
commit 27b0420f upstream. Recent commit that modified fib route event handler to handle events according to their priority introduced use-after-free[0] in mp->mfi pointer usage. The pointer now is not just cached in order to be compared to following fib_info instances, but is also dereferenced to obtain fib_priority. However, since mlx5 lag code doesn't hold the reference to fin_info during whole mp->mfi lifetime, it could be used after fib_info instance has already been freed be kernel infrastructure code. Don't ever dereference mp->mfi pointer. Refactor it to be 'const void*' type and cache fib_info priority in dedicated integer. Group fib_info-related data into dedicated 'fib' structure that will be further extended by following patches in the series. [0]: [ 203.588029] ================================================================== [ 203.590161] BUG: KASAN: use-after-free in mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.592386] Read of size 4 at addr ffff888144df2050 by task kworker/u20:4/138 [ 203.594766] CPU: 3 PID: 138 Comm: kworker/u20:4 Tainted: G B 5.17.0-rc7+ #6 [ 203.596751] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 203.598813] Workqueue: mlx5_lag_mp mlx5_lag_fib_update [mlx5_core] [ 203.600053] Call Trace: [ 203.600608] <TASK> [ 203.601110] dump_stack_lvl+0x48/0x5e [ 203.601860] print_address_description.constprop.0+0x1f/0x160 [ 203.602950] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.604073] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.605177] kasan_report.cold+0x83/0xdf [ 203.605969] ? mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.607102] mlx5_lag_fib_update+0xabd/0xd60 [mlx5_core] [ 203.608199] ? mlx5_lag_init_fib_work+0x1c0/0x1c0 [mlx5_core] [ 203.609382] ? read_word_at_a_time+0xe/0x20 [ 203.610463] ? strscpy+0xa0/0x2a0 [ 203.611463] process_one_work+0x722/0x1270 [ 203.612344] worker_thread+0x540/0x11e0 [ 203.613136] ? rescuer_thread+0xd50/0xd50 [ 203.613949] kthread+0x26e/0x300 [ 203.614627] ? kthread_complete_and_exit+0x20/0x20 [ 203.615542] ret_from_fork+0x1f/0x30 [ 203.616273] </TASK> [ 203.617174] Allocated by task 3746: [ 203.617874] kasan_save_stack+0x1e/0x40 [ 203.618644] __kasan_kmalloc+0x81/0xa0 [ 203.619394] fib_create_info+0xb41/0x3c50 [ 203.620213] fib_table_insert+0x190/0x1ff0 [ 203.621020] fib_magic.isra.0+0x246/0x2e0 [ 203.621803] fib_add_ifaddr+0x19f/0x670 [ 203.622563] fib_inetaddr_event+0x13f/0x270 [ 203.623377] blocking_notifier_call_chain+0xd4/0x130 [ 203.624355] __inet_insert_ifa+0x641/0xb20 [ 203.625185] inet_rtm_newaddr+0xc3d/0x16a0 [ 203.626009] rtnetlink_rcv_msg+0x309/0x880 [ 203.626826] netlink_rcv_skb+0x11d/0x340 [ 203.627626] netlink_unicast+0x4cc/0x790 [ 203.628430] netlink_sendmsg+0x762/0xc00 [ 203.629230] sock_sendmsg+0xb2/0xe0 [ 203.629955] ____sys_sendmsg+0x58a/0x770 [ 203.630756] ___sys_sendmsg+0xd8/0x160 [ 203.631523] __sys_sendmsg+0xb7/0x140 [ 203.632294] do_syscall_64+0x35/0x80 [ 203.633045] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.634427] Freed by task 0: [ 203.635063] kasan_save_stack+0x1e/0x40 [ 203.635844] kasan_set_track+0x21/0x30 [ 203.636618] kasan_set_free_info+0x20/0x30 [ 203.637450] __kasan_slab_free+0xfc/0x140 [ 203.638271] kfree+0x94/0x3b0 [ 203.638903] rcu_core+0x5e4/0x1990 [ 203.639640] __do_softirq+0x1ba/0x5d3 [ 203.640828] Last potentially related work creation: [ 203.641785] kasan_save_stack+0x1e/0x40 [ 203.642571] __kasan_record_aux_stack+0x9f/0xb0 [ 203.643478] call_rcu+0x88/0x9c0 [ 203.644178] fib_release_info+0x539/0x750 [ 203.644997] fib_table_delete+0x659/0xb80 [ 203.645809] fib_magic.isra.0+0x1a3/0x2e0 [ 203.646617] fib_del_ifaddr+0x93f/0x1300 [ 203.647415] fib_inetaddr_event+0x9f/0x270 [ 203.648251] blocking_notifier_call_chain+0xd4/0x130 [ 203.649225] __inet_del_ifa+0x474/0xc10 [ 203.650016] devinet_ioctl+0x781/0x17f0 [ 203.650788] inet_ioctl+0x1ad/0x290 [ 203.651533] sock_do_ioctl+0xce/0x1c0 [ 203.652315] sock_ioctl+0x27b/0x4f0 [ 203.653058] __x64_sys_ioctl+0x124/0x190 [ 203.653850] do_syscall_64+0x35/0x80 [ 203.654608] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 203.666952] The buggy address belongs to the object at ffff888144df2000 which belongs to the cache kmalloc-256 of size 256 [ 203.669250] The buggy address is located 80 bytes inside of 256-byte region [ffff888144df2000, ffff888144df2100) [ 203.671332] The buggy address belongs to the page: [ 203.672273] page:00000000bf6c9314 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x144df0 [ 203.674009] head:00000000bf6c9314 order:2 compound_mapcount:0 compound_pincount:0 [ 203.675422] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [ 203.676819] raw: 002ffff800010200 0000000000000000 dead000000000122 ffff888100042b40 [ 203.678384] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 203.679928] page dumped because: kasan: bad access detected [ 203.681455] Memory state around the buggy address: [ 203.682421] ffff888144df1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.683863] ffff888144df1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.685310] >ffff888144df2000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.686701] ^ [ 203.687820] ffff888144df2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 203.689226] ffff888144df2100: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 203.690620] ================================================================== Fixes: ad11c4f1 ("net/mlx5e: Lag, Only handle events from highest priority multipath entry") Signed-off-by:
-
Moshe Shemesh authored
commit cb7786a7 upstream. The sync reset flow can lead to the following deadlock when poll_sync_reset() is called by timer softirq and waiting on del_timer_sync() for the same timer. Fix that by moving the part of the flow that waits for the timer to reset_reload_work. It fixes the following kernel Trace: RIP: 0010:del_timer_sync+0x32/0x40 ... Call Trace: <IRQ> mlx5_sync_reset_clear_reset_requested+0x26/0x50 [mlx5_core] poll_sync_reset.cold+0x36/0x52 [mlx5_core] call_timer_fn+0x32/0x130 __run_timers.part.0+0x180/0x280 ? tick_sched_handle+0x33/0x60 ? tick_sched_timer+0x3d/0x80 ? ktime_get+0x3e/0xa0 run_timer_softirq+0x2a/0x50 __do_softirq+0xe1/0x2d6 ? hrtimer_interrupt+0x136/0x220 irq_exit+0xae/0xb0 smp_apic_timer_interrupt+0x7b/0x140 apic_timer_interrupt+0xf/0x20 </IRQ> Fixes: 3c5193a8 ("net/mlx5: Use del_timer_sync in fw reset flow of halting poll") Signed-off-by:
-
Moshe Shemesh authored
commit fc3d3db0 upstream. Double clear of reset requested state can lead to NULL pointer as it will try to delete the timer twice. This can happen for example on a race between abort from FW and pci error or reset. Avoid such case using test_and_clear_bit() to verify only one time reset requested state clear flow. Similarly use test_and_set_bit() to verify only one time reset requested state set flow. Fixes: 7dd6df32 ("net/mlx5: Handle sync reset abort event") Signed-off-by:
-
Mark Bloch authored
commit a042d7f5 upstream. The cited commits didn't use proper matching on inner TTC as a result distribution of encapsulated packets wasn't symmetric between the physical ports. Fixes: 4c71ce50 ("net/mlx5: Support partial TTC rules") Fixes: 8e25a2bc ("net/mlx5: Lag, add support to create TTC tables for LAG port selection") Signed-off-by:
-
Mark Zhang authored
commit c4d963a5 upstream. The arguments of update_buffer_lossy() is in a wrong order. Fix it. Fixes: 88b3d5c9 ("net/mlx5e: Fix port buffers cell size value") Signed-off-by:
-
Paul Blakey authored
commit b069e14f upstream. __mlx5_tc_ct_entry_put() queues release of tuple related to some ct FT, if that is the last reference to that tuple, the actual deletion of the tuple can happen after the FT is already destroyed and freed. Flush the used workqueue before destroying the ct FT. Fixes: a2173131 ("net/mlx5e: CT: manage the lifetime of the ct entry object") Reviewed-by:
-
Vlad Buslov authored
commit ada09af9 upstream. Currently, match VLAN rule also matches packets that have multiple VLAN headers. This behavior is similar to buggy flower classifier behavior that has recently been fixed. Fix the issue by matching on outer_second_cvlan_tag with value 0 which will cause the HW to verify the packet doesn't contain second vlan header. Fixes: 699e96dd ("net/mlx5e: Support offloading tc double vlan headers match") Signed-off-by:
-
Ariel Levkovich authored
commit cb0d54cb upstream. When OVS internal port is the vtep device, the first decap rule is matching on the internal port's vport metadata value and then changes the metadata to be the uplink's value. Therefore, following rules on the tunnel, in chain > 0, should avoid matching on internal port metadata and use the uplink vport metadata instead. Select the uplink's metadata value for the source vport match in case the rule is in chain greater than zero, even if the tunnel route device is internal port. Fixes: 166f431e ("net/mlx5e: Add indirect tc offload of ovs internal port") Signed-off-by:
-
Aya Levin authored
commit 7ba2d9d8 upstream. Resource dump menu may span over more than a single page, support it. Otherwise, menu read may result in a memory access violation: reading outside of the allocated page. Note that page format of the first menu page contains menu headers while the proceeding menu pages contain only records. The KASAN logs are as follows: BUG: KASAN: slab-out-of-bounds in strcmp+0x9b/0xb0 Read of size 1 at addr ffff88812b2e1fd0 by task systemd-udevd/496 CPU: 5 PID: 496 Comm: systemd-udevd Tainted: G B 5.16.0_for_upstream_debug_2022_01_10_23_12 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_address_description.constprop.0+0x1f/0x140 ? strcmp+0x9b/0xb0 ? strcmp+0x9b/0xb0 kasan_report.cold+0x83/0xdf ? strcmp+0x9b/0xb0 strcmp+0x9b/0xb0 mlx5_rsc_dump_init+0x4ab/0x780 [mlx5_core] ? mlx5_rsc_dump_destroy+0x80/0x80 [mlx5_core] ? lockdep_hardirqs_on_prepare+0x286/0x400 ? raw_spin_unlock_irqrestore+0x47/0x50 ? aomic_notifier_chain_register+0x32/0x40 mlx5_load+0x104/0x2e0 [mlx5_core] mlx5_init_one+0x41b/0x610 [mlx5_core] .... The buggy address belongs to the object at ffff88812b2e0000 which belongs to the cache kmalloc-4k of size 4096 The buggy address is located 4048 bytes to the right of 4096-byte region [ffff88812b2e0000, ffff88812b2e1000) The buggy address belongs to the page: page:000000009d69807a refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88812b2e6000 pfn:0x12b2e0 head:000000009d69807a order:3 compound_mapcount:0 compound_pincount:0 flags: 0x8000000000010200(slab|head|zone=2) raw: 8000000000010200 0000000000000000 dead000000000001 ffff888100043040 raw: ffff88812b2e6000 0000000080040000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88812b2e1e80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88812b2e1f00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc >ffff88812b2e1f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ^ ffff88812b2e2000: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88812b2e2080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ================================================================== Fixes: 12206b17 ("net/mlx5: Add support for resource dump") Signed-off-by:
-
Moshe Tal authored
commit b781bff8 upstream. Setting dscp2prio during the driver reload can cause dcb ieee app list to be not empty after the reload finish and as a result to a conflict between the priority trust state reported by the app and the state in the device register. Reset the dcb ieee app list on initialization in case this is conflicting with the register status. Fixes: 2a5e7a13 ("net/mlx5e: Add dcbnl dscp to priority support") Signed-off-by:
-
Yang Yingliang authored
commit a15932f4 upstream. It will cause null-ptr-deref in resource_size(), if platform_get_resource() returns NULL, move calling resource_size() after devm_ioremap_resource() that will check 'res' to avoid null-ptr-deref. And use devm_platform_get_and_ioremap_resource() to simplify code. Fixes: 46d1fb07 ("iommu/dart: Add DART iommu driver") Signed-off-by:
-
Lu Baolu authored
commit da8669ff upstream. The page fault handling framework in the IOMMU core explicitly states that it doesn't handle PCI PASID Stop Marker and the IOMMU drivers must discard them before reporting faults. This handles Stop Marker messages in prq_event_thread() before reporting events to the core. The VT-d driver explicitly drains the pending page requests when a CPU page table (represented by a mm struct) is unbound from a PASID according to the procedures defined in the VT-d spec. The Stop Marker messages do not need a response. Hence, it is safe to drop the Stop Marker messages silently if any of them is found in the page request queue. Fixes: d5b9e4bf ("iommu/vt-d: Report prq to io-pgfault framework") Signed-off-by:
-
Pierre-Louis Bossart authored
commit eb577320 upstream. cppcheck throws the following warning: sound/soc/soc-ops.c:461:8: style: Variable 'ret' is assigned a value that is never used. [unreadVariable] ret = err; ^ This seems to be a missing change in the return value. Fixes: 7f3d90a3 ("ASoC: ops: Fix stereo change notifications in snd_soc_put_volsw_sx()") Signed-off-by:
-
Neil Armstrong authored
commit 0c9b152c upstream. This commit e138233e causes the following system crash when using audio on G12A/G12B & SM1 systems: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282 in_atomic(): 1, irqs_disabled(): 128, non_block: 0, pid: 0, name: swapper/0 preempt_count: 10001, expected: 0 RCU nest depth: 0, expected: 0 Preemption disabled at: schedule_preempt_disabled+0x20/0x2c mutex_lock+0x24/0x60 _snd_pcm_stream_lock_irqsave+0x20/0x3c snd_pcm_period_elapsed+0x24/0xa4 axg_fifo_pcm_irq_block+0x64/0xdc __handle_irq_event_percpu+0x104/0x264 handle_irq_event+0x48/0xb4 ... start_kernel+0x3f0/0x484 __primary_switched+0xc0/0xc8 Revert this commit until the crash is fixed. Fixes: e138233e ("ASoC: meson: axg-card: make links nonatomic") Reported-by:
-
Neil Armstrong authored
commit c26830b6 upstream. This reverts commit bf5e4887 because the following and required commit e138233e causes the following system crash when using audio: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:282 Fixes: bf5e4887 ("ASoC: meson: axg-tdm-interface: manage formatters in trigger") Reported-by:
-
Codrin Ciubotariu authored
commit 660564fc upstream. As pointed out by Sascha Hauer, this patch changes: if (pmc->config && !pcm->config->prepare_slave_config) <do nothing> to: if (pmc->config && !pcm->config->prepare_slave_config) snd_dmaengine_pcm_prepare_slave_config() This breaks the drivers that do not need a call to dmaengine_slave_config(). Drivers that still need to call snd_dmaengine_pcm_prepare_slave_config(), but have a NULL pcm->config->prepare_slave_config should use snd_dmaengine_pcm_prepare_slave_config() as their prepare_slave_config callback. Fixes: 9a1e1344 ("ASoC: dmaengine: do not use a NULL prepare_slave_config() callback") Reported-by:
-
Adam Wujek authored
commit 75d2b2b0 upstream. Explicitly disable PEC when the client does not support it. The problematic scenario is the following. A device with enabled PEC support is up and running and a kernel driver is loaded. Then the driver is unloaded (or device unbound), the HW device is reconfigured externally (e.g. by i2cset) to advertise itself as not supporting PEC. Without a new code, at the second load of the driver (or bind) the "flags" variable is not updated to avoid PEC usage. As a consequence the further communication with the device is done with the PEC enabled, which is wrong and may fail. The implementation first disable the I2C_CLIENT_PEC flag, then the old code enable it if needed. Fixes: 4e5418f7 ("hwmon: (pmbus_core) Check adapter PEC support") Signed-off-by:
-
Armin Wolf authored
commit 7b2666ce upstream. When removing the adt7470 module, a warning might be printed: do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffffa006052b>] adt7470_update_thread+0x7b/0x130 [adt7470] This happens because adt7470_update_thread() can leave the kthread in TASK_INTERRUPTIBLE state when the kthread is being stopped before the call of set_current_state(). Since kthread_exit() might sleep in exit_signals(), the warning is printed. Fix that by using schedule_timeout_interruptible() and removing the call of set_current_state(). This causes TASK_INTERRUPTIBLE to be set after kthread_should_stop() which might cause the kthread to exit. Reported-by:
-
Puyou Lu authored
commit dba78579 upstream. When one port's input state get inverted (eg. from low to hight) after pca953x_irq_setup but before setting irq_mask (by some other driver such as "gpio-keys"), the next inversion of this port (eg. from hight to low) will not be triggered any more (because irq_stat is not updated at the first time). Issue should be fixed after this commit. Fixes: 89ea8bbe ("gpio: pca953x.c: add interrupt handling capability") Signed-off-by:
-
Nobuhiro Iwamatsu authored
commit 171865da upstream. The fwnode of GPIO IRQ must be set to its own fwnode, not the fwnode of the parent IRQ. Therefore, this sets own fwnode instead of the parent IRQ fwnode to GPIO IRQ's. Fixes: 2ad74f40 ("gpio: visconti: Add Toshiba Visconti GPIO support") Signed-off-by:
-
Duoming Zhou authored
commit 4071bf12 upstream. There are sleep in atomic bug that could cause kernel panic during firmware download process. The root cause is that nlmsg_new with GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer handler. The call trace is shown below: BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265 Call Trace: kmem_cache_alloc_node __alloc_skb nfc_genl_fw_download_done call_timer_fn __run_timers.part.0 run_timer_softirq __do_softirq ... The nlmsg_new with GFP_KERNEL parameter may sleep during memory allocation process, and the timer handler is run as the result of a "software interrupt" that should not call any other function that could sleep. This patch changes allocation mode of netlink message from GFP_KERNEL to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: 9674da87 ("NFC: Add firmware upload netlink command") Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD") Signed-off-by:
-
Duoming Zhou authored
commit d270453a upstream. There are destructive operations such as nfcmrvl_fw_dnld_abort and gpio_free in nfcmrvl_nci_unregister_dev. The resources such as firmware, gpio and so on could be destructed while the upper layer functions such as nfcmrvl_fw_dnld_start and nfcmrvl_nci_recv_frame is executing, which leads to double-free, use-after-free and null-ptr-deref bugs. There are three situations that could lead to double-free bugs. The first situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | nfcmrvl_nci_unregister_dev release_firmware() | nfcmrvl_fw_dnld_abort kfree(fw) //(1) | fw_dnld_over | release_firmware ... | kfree(fw) //(2) | ... The second situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_fw_dnld_start | ... | mod_timer | (wait a time) | fw_dnld_timeout | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware ... | kfree(fw) //(2) The third situation is shown below: (Thread 1) | (Thread 2) nfcmrvl_nci_recv_frame | if(..->fw_download_in_progress)| nfcmrvl_fw_dnld_recv_frame | queue_work | | fw_dnld_rx_work | nfcmrvl_nci_unregister_dev fw_dnld_over | nfcmrvl_fw_dnld_abort release_firmware | fw_dnld_over kfree(fw) //(1) | release_firmware | kfree(fw) //(2) The firmware struct is deallocated in position (1) and deallocated in position (2) again. The crash trace triggered by POC is like below: BUG: KASAN: double-free or invalid-free in fw_dnld_over Call Trace: kfree fw_dnld_over nfcmrvl_nci_unregister_dev nci_uart_tty_close tty_ldisc_kill tty_ldisc_hangup __tty_hangup.part.0 tty_release ... What's more, there are also use-after-free and null-ptr-deref bugs in nfcmrvl_fw_dnld_start. If we deallocate firmware struct, gpio or set null to the members of priv->fw_dnld in nfcmrvl_nci_unregister_dev, then, we dereference firmware, gpio or the members of priv->fw_dnld in nfcmrvl_fw_dnld_start, the UAF or NPD bugs will happen. This patch reorders destructive operations after nci_unregister_device in order to synchronize between cleanup routine and firmware download routine. The nci_unregister_device is well synchronized. If the device is detaching, the firmware download routine will goto error. If firmware download routine is executing, nci_unregister_device will wait until firmware download routine is finished. Fixes: 3194c687 ("NFC: nfcmrvl: add firmware download support") Signed-off-by:
-
Duoming Zhou authored
commit da5c0f11 upstream. The device_is_registered() in nfc core is used to check whether nfc device is registered in netlink related functions such as nfc_fw_download(), nfc_dev_up() and so on. Although device_is_registered() is protected by device_lock, there is still a race condition between device_del() and device_is_registered(). The root cause is that kobject_del() in device_del() is not protected by device_lock. (cleanup task) | (netlink task) | nfc_unregister_device | nfc_fw_download device_del | device_lock ... | if (!device_is_registered)//(1) kobject_del//(2) | ... ... | device_unlock The device_is_registered() returns the value of state_in_sysfs and the state_in_sysfs is set to zero in kobject_del(). If we pass check in position (1), then set zero in position (2). As a result, the check in position (1) is useless. This patch uses bool variable instead of device_is_registered() to judge whether the nfc device is registered, which is well synchronized. Fixes: 3e256b8f ("NFC: add nfc subsystem core") Signed-off-by:
-
Andreas Larsson authored
commit 2873d4d5 upstream. The previous split budget between TX and RX made it return not using the entire budget but at the same time not having calling called napi_complete. This sometimes led to the poll to not be called, and at the same time having TX and RX interrupts disabled resulting in the driver getting stuck. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-4-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
-
Andreas Larsson authored
commit 1e93ed26 upstream. The systemid property was checked for in the wrong place of the device tree and compared to the wrong value. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-3-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
-
Daniel Hellstrom authored
commit 101da426 upstream. Use the device of the device tree node should be rather than the device of the struct net_device when allocating DMA buffers. The driver got away with it on sparc32 until commit 53b7670e ("sparc: factor the dma coherent mapping into helper") after which the driver oopses. Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Link: https://lore.kernel.org/all/20220429084656.29788-2-andreas@gaisler.com Cc: stable@vger.kernel.org Signed-off-by:
-
Oliver Hartkopp authored
commit 72ed3ee9 upstream. As a carry over from the CAN_RAW socket (which allows to change the CAN interface while mantaining the filter setup) the re-binding of the CAN_ISOTP socket needs to take care about CAN ID address information and subscriptions. It turned out that this feature is so limited (e.g. the sockopts remain fix) that it finally has never been needed/used. In opposite to the stateless CAN_RAW socket the switching of the CAN ID subscriptions might additionally lead to an interrupted ongoing PDU reception. So better remove this unneeded complexity. Fixes: e057dd3f ("can: add ISO 15765-2:2016 transport protocol") Link: https://lore.kernel.org/all/20220422082337.1676-1-socketcan@hartkopp.net Cc: stable@vger.kernel.org Signed-off-by:
-
Duoming Zhou authored
commit 47f070a6 upstream. There are deadlocks caused by del_timer_sync(&priv->hang_timer) and del_timer_sync(&priv->rr_timer) in grcan_close(), one of the deadlocks are shown below: (Thread 1) | (Thread 2) | grcan_reset_timer() grcan_close() | mod_timer() spin_lock_irqsave() //(1) | (wait a time) ... | grcan_initiate_running_reset() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold priv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need priv->lock in position (2) of thread 2. As a result, grcan_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Link: https://lore.kernel.org/all/20220425042400.66517-1-duoming@zju.edu.cn Fixes: 6cec9b07 ("can: grcan: Add device driver for GRCAN and GRHCAN cores") Cc: stable@vger.kernel.org Signed-off-by:
-
Jan Höppner authored
commit b9c10f68 upstream. Read requests that return with NRF error are partially completed in dasd_eckd_ese_read(). The function keeps track of the amount of processed bytes and the driver will eventually return this information back to the block layer for further processing via __dasd_cleanup_cqr() when the request is in the final stage of processing (from the driver's perspective). For this, blk_update_request() is used which requires the number of bytes to complete the request. As per documentation the nr_bytes parameter is described as follows: "number of bytes to complete for @req". This was mistakenly interpreted as "number of bytes _left_ for @req" leading to new requests with incorrect data length. The consequence are inconsistent and completely wrong read requests as data from random memory areas are read back. Fix this by correctly specifying the amount of bytes that should be used to complete the request. Fixes: 5e6bdd37 ("s390/dasd: fix data corruption for thin provisioned devices") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
-
Jan Höppner authored
commit cd68c48e upstream. When reading unformatted tracks on ESE devices, the corresponding memory areas are simply set to zero for each segment. This is done incorrectly for blocksizes < 4096. There are two problems. First, the increment of dst is done using the counter of the loop (off), which is increased by blksize every iteration. This leads to a much bigger increment for dst as actually intended. Second, the increment of dst is done before the memory area is set to 0, skipping a significant amount of bytes of memory. This leads to illegal overwriting of memory and ultimately to a kernel panic. This is not a problem with 4k blocksize because blk_queue_max_segment_size is set to PAGE_SIZE, always resulting in a single iteration for the inner segment loop (bv.bv_len == blksize). The incorrectly used 'off' value to increment dst is 0 and the correct memory area is used. In order to fix this for blksize < 4k, increment dst correctly using the blksize and only do it at the end of the loop. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # v5.3+ Signed-off-by:
-
Stefan Haberland authored
commit 71f38716 upstream. For ESE devices we get an error for write operations on an unformatted track. Afterwards the track will be formatted and the IO operation restarted. When using alias devices a track might be accessed by multiple requests simultaneously and there is a race window that a track gets formatted twice resulting in data loss. Prevent this by remembering the amount of formatted tracks when starting a request and comparing this number before actually formatting a track on the fly. If the number has changed there is a chance that the current track was finally formatted in between. As a result do not format the track and restart the current IO to check. The number of formatted tracks does not match the overall number of formatted tracks on the device and it might wrap around but this is no problem. It is only needed to recognize that a track has been formatted at all in between. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
-
Stefan Haberland authored
commit 5b53a405 upstream. For ESE devices we get an error when accessing an unformatted track. The handling of this error will return zero data for read requests and format the track on demand before writing to it. To do this the code needs to distinguish between read and write requests. This is done with data from the blocklayer request. A pointer to the blocklayer request is stored in the CQR. If there is an error on the device an ERP request is built to do error recovery. While the ERP request is mostly a copy of the original CQR the pointer to the blocklayer request is not copied to not accidentally pass it back to the blocklayer without cleanup. This leads to the error that during ESE handling after an ERP request was built it is not possible to determine the IO direction. This leads to the formatting of a track for read requests which might in turn lead to data corruption. Fixes: 5e2b17e7 ("s390/dasd: Add dynamic formatting support for ESE volumes") Cc: stable@vger.kernel.org # 5.3+ Signed-off-by:
-
Mark Brown authored
commit fce49921 upstream. The AIU CODEC has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
Mark Brown authored
commit 12131008 upstream. The G12A tohdmi has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
Mark Brown authored
commit 2e3a0d1b upstream. The AIU ACODEC has a custom put() operation which returns 0 when the value of the mux changes, meaning that events are not generated for userspace. Change to return 1 in this case, the function returns early in the case where there is no change. Signed-off-by:
-
Mark Brown authored
commit b4f5c6b2 upstream. The WM8958 DSP controls all return 0 on successful write, not a boolean value indicating if the write changed the value of the control. Fix this by returning 1 after a change, there is already a check at the start of each put() that skips the function in the case that there is no change. Signed-off-by:
-
ChiYuan Huang authored
commit 87c18514 upstream. Correct the reg 0x09 size to one byte. Signed-off-by:
-
Mark Brown authored
commit 08ef4840 upstream. The tone generator frequency control just returns 0 on successful write, not a boolean value indicating if there was a change or not. Compare what was written with the value that was there previously so that notifications are generated appropriately when the value changes. Signed-off-by:
-