Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- Oct 15, 2020
-
-
John David Anglin authored
Increase the number of lws locks to 256 entries (instead of 16) and choose lock entry based on bits 3-11 (instead of 4-7) of the relevant address. With this change we archieve more fine-grained locking in futex syscalls and thus reduce the number of possible stalls. Signed-off-by:
-
John David Anglin authored
Let the complier treat the pointers volatile to ensure that they get accessed atomicly. Signed-off-by:
-
John David Anglin authored
Correct the comments: The jump is forwards, not backwards. Enable the interrupts after %r29 (reference param area) was loaded. Signed-off-by:
-
John David Anglin authored
This change allows the sync barrier instruction to be patched to a nop. Signed-off-by:
-
Helge Deller authored
The kernel test robot reports missing functions. Add them. hppa-linux-ld: drivers/firmware/arm_scmi/perf.o: in function `scmi_perf_fc_ring_db': (.text+0x610): undefined reference to `ioread64_hi_lo' (.text+0x63c): undefined reference to `iowrite64_hi_lo' Reported-by:
-
Christoph Hellwig authored
Enable libata support for the Nat Semi NS87415 controller, and disable the soon to be removed legacy ide driver entirely. Signed-off-by:
-
Helge Deller authored
Signed-off-by: -
Helge Deller authored
HPUX has separate NDELAY & NONBLOCK values. In the past we wanted to be able to run HP-UX binaries natively on parisc Linux which is why we defined O_NONBLOCK to 000200004 to distinguish NDELAY & NONBLOCK bits. But with 2 bits set in this bitmask we often ran into compatibility issues with other Linux applications which often only test one bit (or even compare the values). To avoid such issues in the future, this patch changes O_NONBLOCK to become 000200000. That way old programs will still be functional, and for new programs we now have only one bit set. Update the comment about SOCK_NONBLOCK too. Signed-off-by: -
Helge Deller authored
Those flags are nowhere used in the Linux kernel and were added when we still wanted to support HP-UX in a compat mode. Since we never will support HP-UX, drop those flags. Signed-off-by: -
Helge Deller authored
No need to allow external interrupts when the IPI loop is going to finish now. Signed-off-by: -
Helge Deller authored
When running on qemu, SeaBIOS-hppa stores the iomem address for the emulated fw_cfg port in PAGE0_>pad0[2/3]. Let the Linux driver auto-configure the fw_cfg interface with it, so that the fw_cfg info shows up in /sys/firmware/qemu_fw_cfg. Signed-off-by:
-
- Oct 14, 2020
-
-
Jason A. Donenfeld authored
A recent change to the checksum code removed usage of some extra arguments, alongside with storage on the stack for those, and the stack pointer no longer needed to be adjusted in the function prologue. But a left over subtraction wasn't removed in the function epilogue, causing the function to return with the stack pointer moved 16 bytes away from where it should have. This corrupted local state and lead to weird crashes. This simply removes the leftover instruction from the epilogue. Fixes: 70d65cd5 ("ppc: propagate the calling conventions change down to csum_partial_copy_generic()") Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Mike Rapoport authored
for_each_memblock() is used to iterate over memblock.memory in a few places that use data from memblock_region rather than the memory ranges. Introduce separate for_each_mem_region() and for_each_reserved_mem_region() to improve encapsulation of memblock internals from its users. Signed-off-by:
-
Mike Rapoport authored
Iteration over memblock.reserved with for_each_reserved_mem_region() used __next_reserved_mem_region() that implemented a subset of __next_mem_region(). Use __for_each_mem_range() and, essentially, __next_mem_region() with appropriate parameters to reduce code duplication. While on it, rename for_each_reserved_mem_region() to for_each_reserved_mem_range() for consistency. Signed-off-by:
-
Mike Rapoport authored
* Replace magic numbers with defines * Replace memblock_find_in_range() + memblock_reserve() with memblock_phys_alloc_range() * Stop checking for low memory size in reserve_crashkernel_low(). The allocation from limited range will anyway fail if there is no enough memory, so there is no need for extra traversal of memblock.memory Signed-off-by:
-
Mike Rapoport authored
Currently, initrd image is reserved very early during setup and then it might be relocated and re-reserved after the initial physical memory mapping is created. The "late" reservation of memblock verifies that mapped memory size exceeds the size of initrd, then checks whether the relocation required and, if yes, relocates inirtd to a new memory allocated from memblock and frees the old location. The check for memory size is excessive as memblock allocation will anyway fail if there is not enough memory. Besides, there is no point to allocate memory from memblock using memblock_find_in_range() + memblock_reserve() when there exists memblock_phys_alloc_range() with required functionality. Remove the redundant check and simplify memblock allocation. Signed-off-by:
-
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start = __pfn_to_phys(memblock_region_memory_base_pfn(reg); end = __pfn_to_phys(memblock_region_memory_end_pfn(reg)); /* do something with start and end */ } Using for_each_mem_range() iterator is more appropriate in such cases and allows simpler and cleaner code. [akpm@linux-foundation.org: fix arch/arm/mm/pmsa-v7.c build] [rppt@linux.ibm.com: mips: fix cavium-octeon build caused by memblock refactoring] Link: http://lkml.kernel.org/r/20200827124549.GD167163@linux.ibm.com Signed-off-by: -
Mike Rapoport authored
There are several occurrences of the following pattern: for_each_memblock(memory, reg) { start_pfn = memblock_region_memory_base_pfn(reg); end_pfn = memblock_region_memory_end_pfn(reg); /* do something with start_pfn and end_pfn */ } Rather than iterate over all memblock.memory regions and each time query for their start and end PFNs, use for_each_mem_pfn_range() iterator to get simpler and clearer code. Signed-off-by: -
Mike Rapoport authored
Currently for_each_mem_range() and for_each_mem_range_rev() iterators are the most generic way to traverse memblock regions. As such, they have 8 parameters and they are hardly convenient to users. Most users choose to utilize one of their wrappers and the only user that actually needs most of the parameters is memblock itself. To avoid yet another naming for memblock iterators, rename the existing for_each_mem_range[_rev]() to __for_each_mem_range[_rev]() and add a new for_each_mem_range[_rev]() wrappers with only index, start and end parameters. The new wrapper nicely fits into init_unavailable_mem() and will be used in upcoming changes to simplify memblock traversals. Signed-off-by:
-
Mike Rapoport authored
The only user of memblock_dbg() outside memblock was s390 setup code and it is converted to use pr_debug() instead. This allows to stop exposing memblock_debug and memblock_dbg() to the rest of the kernel. [akpm@linux-foundation.org: make memblock_dbg() safer and neater] Signed-off-by:
-
Mike Rapoport authored
microblaze does not support neither NUMA not SPARSMEM, so there is no point to call memblock_set_node() and sparse_memory_present_with_active_regions() functions during microblaze memory initialization. Remove these calls and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
RISC-V does not (yet) support NUMA and for UMA architectures node 0 is used implicitly during early memory initialization. There is no need to call memblock_set_node(), remove this call and the surrounding code. Signed-off-by:
-
Mike Rapoport authored
Instead of traversing memblock.memory regions to find memory_start and memory_end, simply query memblock_{start,end}_of_DRAM(). Signed-off-by: -
Mike Rapoport authored
dummy_numa_init() loops over memblock.memory and passes nid=0 to numa_add_memblk() which essentially wraps memblock_set_node(). However, memblock_set_node() can cope with entire memory span itself, so the loop over memblock.memory regions is redundant. Using a single call to memblock_set_node() rather than a loop also fixes an issue with a buggy ACPI firmware in which the SRAT table covers some but not all of the memory in the EFI memory map. Jonathan Cameron says: This issue can be easily triggered by having an SRAT table which fails to cover all elements of the EFI memory map. This firmware error is detected and a warning printed. e.g. "NUMA: Warning: invalid memblk node 64 [mem 0x240000000-0x27fffffff]" At that point we fall back to dummy_numa_init(). However, the failed ACPI init has left us with our memblocks all broken up as we split them when trying to assign them to NUMA nodes. We then iterate over the memblocks and add them to node 0. numa_add_memblk() calls memblock_set_node() which merges regions that were previously split up during the earlier attempt to add them to different nodes during parsing of SRAT. This means elements are moved in the memblock array and we can end up in a different memblock after the call to numa_add_memblk(). Result is: Unable to handle kernel paging request at virtual address 0000000000003a40 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000003a40] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP ... Call trace: sparse_init_nid+0x5c/0x2b0 sparse_init+0x138/0x170 bootmem_init+0x80/0xe0 setup_arch+0x2a0/0x5fc start_kernel+0x8c/0x648 Replace the loop with a single call to memblock_set_node() to the entire memory. Signed-off-by: -
Mike Rapoport authored
free_highpages() in both arm and xtensa essentially open-code for_each_free_mem_range() loop to detect high memory pages that were not reserved and that should be initialized and passed to the buddy allocator. Replace open-coded implementation of for_each_free_mem_range() with usage of memblock API to simplify the code. Signed-off-by:
-
Mike Rapoport authored
Patch series "memblock: seasonal cleaning^w cleanup", v3. These patches simplify several uses of memblock iterators and hide some of the memblock implementation details from the rest of the system. This patch (of 17): The memory size calculation in kvm_cma_reserve() traverses memblock.memory rather than simply call memblock_phys_mem_size(). The comment in that function suggests that at some point there should have been call to memblock_analyze() before memblock_phys_mem_size() could be used. As of now, there is no memblock_analyze() at all and memblock_phys_mem_size() can be used as soon as cold-plug memory is registered with memblock. Replace loop over memblock.memory with a call to memblock_phys_mem_size(). Signed-off-by:
-
Matthew Wilcox authored
We account the PTE level of the page tables to the process in order to make smarter OOM decisions and help diagnose why memory is fragmented. For these same reasons, we should account pages allocated for PMDs. With larger process address spaces and ASLR, the number of PMDs in use is higher than it used to be so the inaccuracy is starting to matter. [rppt@linux.ibm.com: arm: __pmd_free_tlb(): call page table destructor] Link: https://lkml.kernel.org/r/20200825111303.GB69694@linux.ibm.com Signed-off-by:
-
Dan Williams authored
In support of device-dax growing the ability to front physically dis-contiguous ranges of memory, update devm_memremap_pages() to track multiple ranges with a single reference counter and devm instance. Convert all [devm_]memremap_pages() users to specify the number of ranges they are mapping in their 'struct dev_pagemap' instance. Signed-off-by:
-
Dan Williams authored
The 'struct resource' in 'struct dev_pagemap' is only used for holding resource span information. The other fields, 'name', 'flags', 'desc', 'parent', 'sibling', and 'child' are all unused wasted space. This is in preparation for introducing a multi-range extension of devm_memremap_pages(). The bulk of this change is unwinding all the places internal to libnvdimm that used 'struct resource' unnecessarily, and replacing instances of 'struct dev_pagemap'.res with 'struct dev_pagemap'.range. P2PDMA had a minor usage of the resource flags field, but only to report failures with "%pR". That is replaced with an open coded print of the range. [dan.carpenter@oracle.com: mm/hmm/test: use after free in dmirror_allocate_chunk()] Link: https://lkml.kernel.org/r/20200926121402.GA7467@kadam Signed-off-by:
-
Dan Williams authored
In preparation to set a fallback value for dev_dax->target_node, introduce generic fallback helpers for phys_to_target_node() A generic implementation based on node-data or memblock was proposed, but as noted by Mike: "Here again, I would prefer to add a weak default for phys_to_target_node() because the "generic" implementation is not really generic. The fallback to reserved ranges is x86 specfic because on x86 most of the reserved areas is not in memblock.memory. AFAIK, no other architecture does this." The info message in the generic memory_add_physaddr_to_nid() implementation is fixed up to properly reflect that memory_add_physaddr_to_nid() communicates "online" node info and phys_to_target_node() indicates "target / to-be-onlined" node info. [akpm@linux-foundation.org: fix CONFIG_MEMORY_HOTPLUG=n build] Link: https://lkml.kernel.org/r/202008252130.7YrHIyMI%25lkp@intel.com Signed-off-by: -
Dan Williams authored
In preparation for attaching a platform device per iomem resource teach the efi_fake_mem code to create an e820 entry per instance. Similar to E820_TYPE_PRAM, bypass merging resource when the e820 map is sanitized. Signed-off-by:
-
Dan Williams authored
Disable parsing of the HMAT for debug, to workaround broken platform instances, or cases where it is otherwise not wanted. [rdunlap@infradead.org: fix build when CONFIG_ACPI is not set] Link: https://lkml.kernel.org/r/70e5ee34-9809-a997-7b49-499e4be61307@infradead.org Signed-off-by:
-
Dan Williams authored
Patch series "device-dax: Support sub-dividing soft-reserved ranges", v5. The device-dax facility allows an address range to be directly mapped through a chardev, or optionally hotplugged to the core kernel page allocator as System-RAM. It is the mechanism for converting persistent memory (pmem) to be used as another volatile memory pool i.e. the current Memory Tiering hot topic on linux-mm. In the case of pmem the nvdimm-namespace-label mechanism can sub-divide it, but that labeling mechanism is not available / applicable to soft-reserved ("EFI specific purpose") memory [3]. This series provides a sysfs-mechanism for the daxctl utility to enable provisioning of volatile-soft-reserved memory ranges. The motivations for this facility are: 1/ Allow performance differentiated memory ranges to be split between kernel-managed and directly-accessed use cases. 2/ Allow physical memory to be provisioned along performance relevant address boundaries. For example, divide a memory-side cache [4] along cache-color boundaries. 3/ Parcel out soft-reserved memory to VMs using device-dax as a security / permissions boundary [5]. Specifically I have seen people (ab)using memmap=nn!ss (mark System-RAM as Persistent Memory) just to get the device-dax interface on custom address ranges. A follow-on for the VM use case is to teach device-dax to dynamically allocate 'struct page' at runtime to reduce the duplication of 'struct page' space in both the guest and the host kernel for the same physical pages. [2]: http://lore.kernel.org/r/20200713160837.13774-11-joao.m.martins@oracle.com [3]: http://lore.kernel.org/r/157309097008.1579826.12818463304589384434.stgit@dwillia2-desk3.amr.corp.intel.com [4]: http://lore.kernel.org/r/154899811738.3165233.12325692939590944259.stgit@dwillia2-desk3.amr.corp.intel.com [5]: http://lore.kernel.org/r/20200110190313.17144-1-joao.m.martins@oracle.com This patch (of 23): In preparation for adding a new numa= option clean up the existing ones to avoid ifdefs in numa_setup(), and provide feedback when the option is numa=fake= option is invalid due to kernel config. The same does not need to be done for numa=noacpi, since the capability is already hard disabled at compile-time. Suggested-by: -
Nick Desaulniers authored
This partially reverts commit b0fe66cf. The minimum supported version of clang is now clang 10.0.1. We still want to pass -meabi=gnu. Suggested-by:
-
Nick Desaulniers authored
This reverts commit 3acf4be2. The minimum supported version of clang is clang 10.0.1. Suggested-by:
-
Nick Desaulniers authored
This reverts commit b9249cba. The minimum supported version of clang is now 10.0.1. Suggested-by:
-
- Oct 13, 2020
-
-
Mike Travis authored
Remove an unused variable. Signed-off-by:
-
Thomas Gleixner authored
The conversion of #DE to the idtentry mechanism introduced a change in the Ooops message which confuses tools which parse crash information in dmesg. Remove the underscore from 'divide_error' to restore previous behaviour. Fixes: 9d06c402 ("x86/entry: Convert Divide Error to IDTENTRY") Reported-by:
-
Nick Desaulniers authored
Clang-11 shipped support for outputs to asm goto statments along the fallthrough path. Double up some of the get_user() and related macros to be able to take advantage of this extended GNU C extension. This should help improve the generated code's performance for these accesses. Cc: Bill Wendling <morbo@google.com> Suggested-by:
-
- Oct 12, 2020
-
-
Linus Torvalds authored
Instead of inlining the stac/mov/clac sequence (which also requires individual exception table entries and several asm instruction alternatives entries), just generate "call __put_user_nocheck_X" for the __put_user() cases, the same way we changed __get_user earlier. Unlike the get_user() case, we didn't have the same nice infrastructure to just generate the call with a single case, so this actually has to change some of the infrastructure in order to do this. But that only cleans up the code further. So now, instead of using a case statement for the sizes, we just do the same thing we've done on the get_user() side for a long time: use the size as an immediate constant to the asm, and generate the asm that way directly. In order to handle the special case of 64-bit data on a 32-bit kernel, I needed to change the calling convention slightly: the data is passed in %eax[:%edx], the pointer in %ecx, and the return value is also returned in %ecx. It used to be returned in %eax, but because of how %eax can now be a double register input, we don't want mix that with a single-register output. The actual low-level asm is easier to handle: we'll just share the code between the checking and non-checking case, with the non-checking case jumping into the middle of the function. That may sound a bit too special, but this code is all very very special anyway, so... Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-