Select Git revision
Search by author
- Any Author
- authors
-
Angus Ainslie
angus.ainslie
-
Eric Kuzmenko
eric.kuzmenko
-
Evangelos Ribeiro Tzaras
evangelos.tzaras
-
Francois Techene
francois.techene
-
Guido Gunther
guido.gunther
-
JC Staudt
jcstaudt
-
Jonathon Hall
jonathon.hall
-
Julian Sparber
julian.sparber
-
Martin Kepplinger
martin.kepplinger
-
Mohammed Sadiq
mohammed.sadiq
-
Richard Kolla
richard.kolla
-
Sam Hewitt sam.hewitt
-
Sebastian Krzyszkowiak
sebastian.krzyszkowiak
- Jan 11, 2022
-
-
Tejun Heo authored
commit 1756d799 upstream. cgroup process migration permission checks are performed at write time as whether a given operation is allowed or not is dependent on the content of the write - the PID. This currently uses current's credentials which is a potential security weakness as it may allow scenarios where a less privileged process tricks a more privileged one into writing into a fd that it created. This patch makes both cgroup2 and cgroup1 process migration interfaces to use the credentials saved at the time of open (file->f_cred) instead of current's. Reported-by:
-
Nikunj A Dadhania authored
commit fffb5323 upstream. With TDP MMU being the default now, access to mmu_rmaps_stat debugfs file causes following oops: BUG: kernel NULL pointer dereference, address: 0000000000000000 PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP NOPTI CPU: 7 PID: 3185 Comm: cat Not tainted 5.16.0-rc4+ #204 RIP: 0010:pte_list_count+0x6/0x40 Call Trace: <TASK> ? kvm_mmu_rmaps_stat_show+0x15e/0x320 seq_read_iter+0x126/0x4b0 ? aa_file_perm+0x124/0x490 seq_read+0xf5/0x140 full_proxy_read+0x5c/0x80 vfs_read+0x9f/0x1a0 ksys_read+0x67/0xe0 __x64_sys_read+0x19/0x20 do_syscall_64+0x3b/0xc0 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fca6fc13912 Return early when rmaps are not present. Reported-by:
-
Qiuxu Zhuo authored
commit c370baa3 upstream. On systems without HBM (High Bandwidth Memory) mdev/mbase are not released/unmapped. Add the code to release mdev/mbase when failing to detect HBM. [Tony: re-word commit message] Cc: <stable@vger.kernel.org> Fixes: c9450883 ("EDAC/i10nm: Add support for high bandwidth memory") Reported-by:
-
Song Liu authored
commit 46669e86 upstream. commit [1] causes missing bitmap updates when there isn't any WriteMostly devices. Detailed steps to reproduce by Norbert (which somehow didn't make to lore): # setup md10 (raid1) with two drives (1 GByte sparse files) dd if=/dev/zero of=disk1 bs=1024k seek=1024 count=0 dd if=/dev/zero of=disk2 bs=1024k seek=1024 count=0 losetup /dev/loop11 disk1 losetup /dev/loop12 disk2 mdadm --create /dev/md10 --level=1 --raid-devices=2 /dev/loop11 /dev/loop12 # add bitmap (aka write-intent log) mdadm /dev/md10 --grow --bitmap=internal echo check > /sys/block/md10/md/sync_action root:# cat /sys/block/md10/md/mismatch_cnt 0 root:# # remove member drive disk2 (loop12) mdadm /dev/md10 -f loop12 ; mdadm /dev/md10 -r loop12 # modify degraded md device dd if=/dev/urandom of=/dev/md10 bs=512 count=1 # no blocks recorded as out of sync on the remaining member disk1/loop11 root:# mdadm -X /dev/loop11 | grep Bitmap Bitmap : 16 bits (chunks), 0 dirty (0.0%) root:# # re-add disk2, nothing synced because of empty bitmap mdadm /dev/md10 --re-add /dev/loop12 # check integrity again echo check > /sys/block/md10/md/sync_action # disk1 and disk2 are no longer in sync, reads return differend data root:# cat /sys/block/md10/md/mismatch_cnt 128 root:# # clean up mdadm -S /dev/md10 losetup -d /dev/loop11 losetup -d /dev/loop12 rm disk1 disk2 Fix this by moving the WriteMostly check to the if condition for alloc_behind_master_bio(). [1] commit fd3b6975 ("md/raid1: only allocate write behind bio for WriteMostly device") Fixes: fd3b6975 ("md/raid1: only allocate write behind bio for WriteMostly device") Cc: stable@vger.kernel.org # v5.12+ Cc: Guoqing Jiang <guoqing.jiang@linux.dev> Cc: Jens Axboe <axboe@kernel.dk> Reported-by:
-
Arthur Kiyanovski authored
commit 5055dc03 upstream. The role of ena_calc_max_io_queue_num() is to return the number of queues supported by the device, which means the return value should be >=0. The function that calls ena_calc_max_io_queue_num(), checks the return value. If it is 0, it means the device reported it supports 0 IO queues. This case is considered an error and is handled by the calling function accordingly. However the current implementation of ena_calc_max_io_queue_num() is wrong, since when it detects the device supports 0 IO queues, it returns -EFAULT. In such a case the calling function doesn't detect the error, and therefore doesn't handle it. This commit changes ena_calc_max_io_queue_num() to return 0 in case the device reported it supports 0 queues, allowing the calling function to properly handle the error case. Fixes: 736ce3f4 ("net: ena: make ethtool -l show correct max number of queues") Signed-off-by:
-
Arthur Kiyanovski authored
commit cb3d4f98 upstream. A wrong request id received from the device is a sign that something is wrong with it, therefore trigger a device reset. Also add some debug info to the "Page is NULL" print to make it easier to debug. Fixes: 1738cd3e ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)") Signed-off-by:
-
Arthur Kiyanovski authored
commit c255a34e upstream. ena_com_tx_comp_req_id_get() checks the req_id of a received completion, and if it is out of bounds returns -EINVAL. This is a sign that something is wrong with the device and it needs to be reset. The current code does not reset the device in this case, which leaves the driver in an undefined state, where this completion is not properly handled. This commit adds a call to handle_invalid_req_id() in ena_clean_tx_irq() and ena_clean_xdp_irq() which resets the device to fix the issue. This commit also removes unnecessary request id checks from validate_tx_req_id() and validate_xdp_req_id(). This check is unneeded because it was already performed in ena_com_tx_comp_req_id_get(), which is called right before these functions. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
-
Eric Dumazet authored
commit 7d18a078 upstream. tx_queue_len can be set to ~0U, we need to be more careful about overflows. __fls(0) is undefined, as this report shows: UBSAN: shift-out-of-bounds in net/sched/sch_qfq.c:1430:24 shift exponent 51770272 is too large for 32-bit type 'int' CPU: 0 PID: 25574 Comm: syz-executor.0 Not tainted 5.16.0-rc7-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x201/0x2d8 lib/dump_stack.c:106 ubsan_epilogue lib/ubsan.c:151 [inline] __ubsan_handle_shift_out_of_bounds+0x494/0x530 lib/ubsan.c:330 qfq_init_qdisc+0x43f/0x450 net/sched/sch_qfq.c:1430 qdisc_create+0x895/0x1430 net/sched/sch_api.c:1253 tc_modify_qdisc+0x9d9/0x1e20 net/sched/sch_api.c:1660 rtnetlink_rcv_msg+0x934/0xe60 net/core/rtnetlink.c:5571 netlink_rcv_skb+0x200/0x470 net/netlink/af_netlink.c:2496 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x814/0x9f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0xaea/0xe60 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:704 [inline] sock_sendmsg net/socket.c:724 [inline] ____sys_sendmsg+0x5b9/0x910 net/socket.c:2409 ___sys_sendmsg net/socket.c:2463 [inline] __sys_sendmsg+0x280/0x370 net/socket.c:2492 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: 462dbc91 ("pkt_sched: QFQ Plus: fair-queueing service at DRR cost") Signed-off-by:
-
Linus Lüssing authored
commit 938f2e0b upstream. The addition of routable multicast TX handling introduced a bug/regression for packets with a link-local multicast destination: These packets would be sent to all batman-adv nodes with a multicast router and to all batman-adv nodes with an old version without multicast router detection. This even disregards the batman-adv multicast fanout setting, which can potentially lead to an unwanted, high number of unicast transmissions or even congestion. Fixing this by avoiding to send link-local multicast packets to nodes in the multicast router list. Fixes: 11d458c1 ("batman-adv: mcast: apply optimizations for routable packets, too") Signed-off-by:
-
Xin Long authored
commit f9d31c4c upstream. The same fix in commit 5ec7d18d ("sctp: use call_rcu to free endpoint") is also needed for dumping one asoc and sock after the lookup. Fixes: 86fdb344 ("sctp: ensure ep is not destroyed before doing the dump") Signed-off-by:
-
Jianguo Wu authored
commit 5e75d0b2 upstream. As Paolo pointed out, the result of ping IPv6 address depends on the running distro. So explicitly checking the available ping feature, as e.g. do the bareudp.sh self-tests. Fixes: 8b3170e0 ("selftests: net: using ping6 for IPv6 in udpgro_fwd.sh") Signed-off-by:
-
David Ahern authored
commit 8bda81a4 upstream. lwtunnel_valid_encap_type_attr is used to validate encap attributes within a multipath route. Add length validation checking to the type. lwtunnel_valid_encap_type_attr is called converting attributes to fib{6,}_config struct which means it is used before fib_get_nhs, ip6_route_multipath_add, and ip6_route_multipath_del - other locations that use rtnh_ok and then nla_get_u16 on RTA_ENCAP_TYPE attribute. Fixes: 9ed59592 ("lwtunnel: fix autoload of lwt modules") Signed-off-by:
-
David Ahern authored
commit 1ff15a71 upstream. Make sure RTA_GATEWAY for IPv6 multipath route has enough bytes to hold an IPv6 address. Fixes: 6b9ea5a6 ("ipv6: fix multipath route replace error recovery") Signed-off-by:
-
David Ahern authored
commit 4619bcf9 upstream. Commit referenced in the Fixes tag used nla_memcpy for RTA_GATEWAY as does the current nla_get_in6_addr. nla_memcpy protects against accessing memory greater than what is in the attribute, but there is no check requiring the attribute to have an IPv6 address. Add it. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
-
David Ahern authored
commit 664b9c4b upstream. Make sure RTA_FLOW is at least 4B before using. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Signed-off-by:
-
David Ahern authored
commit 7a3429ba upstream. syzbot reported uninit-value: ============================================================ BUG: KMSAN: uninit-value in fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_get_nhs+0xac4/0x1f80 net/ipv4/fib_semantics.c:708 fib_create_info+0x2411/0x4870 net/ipv4/fib_semantics.c:1453 fib_table_insert+0x45c/0x3a10 net/ipv4/fib_trie.c:1224 inet_rtm_newroute+0x289/0x420 net/ipv4/fib_frontend.c:886 Add helper to validate RTA_GATEWAY length before using the attribute. Fixes: 4e902c57 ("[IPv4]: FIB configuration using struct fib_config") Reported-by:
-
Jiri Olsa authored
commit 0daf5cb2 upstream. There's another compilation fail (first here [1]) reported by kernel test robot for W=1 clang build: >> samples/ftrace/ftrace-direct-multi-modify.c:7:6: warning: no previous prototype for function 'my_direct_func1' [-Wmissing-prototypes] void my_direct_func1(unsigned long ip) Direct functions in ftrace direct sample modules need to have prototypes defined. They are already global in order to be visible for the inline assembly, so there's no problem. The kernel test robot reported just error for ftrace-direct-multi-modify, but I got same errors also for the rest of the modules touched by this patch. [1] 67d4f6e3 ftrace/samples: Add missing prototype for my_direct_func Link: https://lkml.kernel.org/r/20211219135317.212430-1-jolsa@kernel.org Reported-by:
-
Jedrzej Jagielski authored
commit e738451d upstream. There was a wrong queues representation in sysfs during driver's reinitialization in case of online cpus number is less than combined queues. It was caused by stopped NetworkManager, which is responsible for calling vsi_open function during driver's initialization. In specific situation (ex. 12 cpus online) there were 16 queues in /sys/class/net/<iface>/queues. In case of modifying queues with value higher, than number of online cpus, then it caused write errors and other errors. Add updating of sysfs's queues representation during driver initialization. Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
-
Mateusz Palczewski authored
commit 40feded8 upstream. When loading the i40e driver, it prints a message like: 'The driver for the device detected a newer version of the NVM image v1.x than expected v1.y. Please install the most recent version of the network driver.' This is misleading as the driver is working as expected. Fix that by removing the second part of message and changing it from dev_info to dev_dbg. Fixes: 4fb29bdd ("i40e: The driver now prints the API version in error message") Signed-off-by:
-
Di Zhu authored
commit 3116f59c upstream. Using ifconfig command to delete the ipv6 address will cause the i40e network card driver to delete its internal mac_filter and i40e_service_task kernel thread will concurrently access the mac_filter. These two processes are not protected by lock so causing the following use-after-free problems. print_address_description+0x70/0x360 ? vprintk_func+0x5e/0xf0 kasan_report+0x1b2/0x330 i40e_sync_vsi_filters+0x4f0/0x1850 [i40e] i40e_sync_filters_subtask+0xe3/0x130 [i40e] i40e_service_task+0x195/0x24c0 [i40e] process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 ? process_one_work+0x7d0/0x7d0 kthread+0x1c3/0x1f0 ? kthread_park+0xc0/0xc0 ret_from_fork+0x35/0x40 Allocated by task 2279810: kasan_kmalloc+0xa0/0xd0 kmem_cache_alloc_trace+0xf3/0x1e0 i40e_add_filter+0x127/0x2b0 [i40e] i40e_add_mac_filter+0x156/0x190 [i40e] i40e_addr_sync+0x2d/0x40 [i40e] __hw_addr_sync_dev+0x154/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_add+0x6c/0x90 igmp6_group_added+0x214/0x230 __ipv6_dev_mc_inc+0x338/0x4f0 addrconf_join_solict.part.7+0xa2/0xd0 addrconf_dad_work+0x500/0x980 process_one_work+0x3f5/0x7d0 worker_thread+0x61/0x6c0 kthread+0x1c3/0x1f0 ret_from_fork+0x35/0x40 Freed by task 2547073: __kasan_slab_free+0x130/0x180 kfree+0x90/0x1b0 __i40e_del_filter+0xa3/0xf0 [i40e] i40e_del_mac_filter+0xf3/0x130 [i40e] i40e_addr_unsync+0x85/0xa0 [i40e] __hw_addr_sync_dev+0x9d/0x210 i40e_set_rx_mode+0x6d/0xf0 [i40e] __dev_set_rx_mode+0xfb/0x1f0 __dev_mc_del+0x69/0x80 igmp6_group_dropped+0x279/0x510 __ipv6_dev_mc_dec+0x174/0x220 addrconf_leave_solict.part.8+0xa2/0xd0 __ipv6_ifa_notify+0x4cd/0x570 ipv6_ifa_notify+0x58/0x80 ipv6_del_addr+0x259/0x4a0 inet6_addr_del+0x188/0x260 addrconf_del_ifaddr+0xcc/0x130 inet6_ioctl+0x152/0x190 sock_do_ioctl+0xd8/0x2b0 sock_ioctl+0x2e5/0x4c0 do_vfs_ioctl+0x14e/0xa80 ksys_ioctl+0x7c/0xa0 __x64_sys_ioctl+0x42/0x50 do_syscall_64+0x98/0x2c0 entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 41c445ff ("i40e: main driver core") Signed-off-by:
-
Martin Habets authored
commit 1d5a4742 upstream. The RX page_ring is an optional feature that improves performance. When allocation fails the driver can still function, but possibly with a lower bandwidth. Guard against dereferencing a NULL page_ring. Fixes: 2768935a ("sfc: reuse pages to avoid DMA mapping/unmapping costs") Signed-off-by:
-
Pavel Skripkin authored
commit 8b5cb7e4 upstream. Syzbot hit NULL deref in rhashtable_free_and_destroy(). The problem was in mesh_paths and mpp_paths being NULL. mesh_pathtbl_init() could fail in case of memory allocation failure, but nobody cared, since ieee80211_mesh_init_sdata() returns void. It led to leaving 2 pointers as NULL. Syzbot has found null deref on exit path, but it could happen anywhere else, because code assumes these pointers are valid. Since all ieee80211_*_setup_sdata functions are void and do not fail, let's embedd mesh_paths and mpp_paths into parent struct to avoid adding error handling on higher levels and follow the pattern of others setup_sdata functions Fixes: 60854fd9 ("mac80211: mesh: convert path table to rhashtable") Reported-and-tested-by:
-
Tom Rix authored
commit 68a18ad7 upstream. Clang static analysis reports this warnings mlme.c:5332:7: warning: Branch condition evaluates to a garbage value have_higher_than_11mbit) ^~~~~~~~~~~~~~~~~~~~~~~ have_higher_than_11mbit is only set to true some of the time in ieee80211_get_rates() but is checked all of the time. So have_higher_than_11mbit needs to be initialized to false. Fixes: 5d6a1b06 ("mac80211: set basic rates earlier") Signed-off-by:
-
Jiasheng Jiang authored
commit 7694a7de upstream. Because of the possible failure of the allocation, data might be NULL pointer and will cause the dereference of the NULL pointer later. Therefore, it might be better to check it and return -ENOMEM. Fixes: 6884c6c4 ("RDMA/verbs: Store the write/write_ex uapi entry points in the uverbs_api") Link: https://lore.kernel.org/r/20211231093315.1917667-1-jiasheng@iscas.ac.cn Signed-off-by:
-
Christoph Hellwig authored
commit 3087a6f3 upstream. This code used to copy in an unsigned long worth of data before the sockptr_t conversion, so restore that. Fixes: a7b75c5a ("net: pass a sockptr_t into ->setsockopt") Reported-by:
-
Aaron Ma authored
commit 00fcf8c7 upstream. This reverts commit f77b83b5. This change breaks multiple usb to ethernet dongles attached on Lenovo USB hub. Fixes: f77b83b5 ("net: usb: r8152: Add MAC passthrough support for more Lenovo Docks") Signed-off-by:
-
Leon Romanovsky authored
commit b35a0f4d upstream. If dst->is_global field is not set, the GRH fields are not cleared and the following infoleak is reported. ===================================================== BUG: KMSAN: kernel-infoleak in instrument_copy_to_user include/linux/instrumented.h:121 [inline] BUG: KMSAN: kernel-infoleak in _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 instrument_copy_to_user include/linux/instrumented.h:121 [inline] _copy_to_user+0x1c9/0x270 lib/usercopy.c:33 copy_to_user include/linux/uaccess.h:209 [inline] ucma_init_qp_attr+0x8c7/0xb10 drivers/infiniband/core/ucma.c:1242 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732 vfs_write+0x8ce/0x2030 fs/read_write.c:588 ksys_write+0x28b/0x510 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __ia32_sys_write+0xdb/0x120 fs/read_write.c:652 do_syscall_32_irqs_on arch/x86/entry/common.c:114 [inline] __do_fast_syscall_32+0x96/0xf0 arch/x86/entry/common.c:180 do_fast_syscall_32+0x34/0x70 arch/x86/entry/common.c:205 do_SYSENTER_32+0x1b/0x20 arch/x86/entry/common.c:248 entry_SYSENTER_compat_after_hwframe+0x4d/0x5c Local variable resp created at: ucma_init_qp_attr+0xa4/0xb10 drivers/infiniband/core/ucma.c:1214 ucma_write+0x637/0x6c0 drivers/infiniband/core/ucma.c:1732 Bytes 40-59 of 144 are uninitialized Memory access of size 144 starts at ffff888167523b00 Data copied to user address 0000000020000100 CPU: 1 PID: 25910 Comm: syz-executor.1 Not tainted 5.16.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 ===================================================== Fixes: 4ba66093 ("IB/core: Check for global flag when using ah_attr") Link: https://lore.kernel.org/r/0e9dd51f93410b7b2f4f5562f52befc878b71afa.1641298868.git.leonro@nvidia.com Reported-by:
-
Karen Sornek authored
commit b712941c upstream. In the absence of this validation, if the user requests to configure queues more than the enabled queues, it results in sending the requested number of queues to the kernel stack (due to the asynchronous nature of VF response), in which case the stack might pick a queue to transmit that is not enabled and result in Tx hang. Fix this bug by limiting the total number of queues allocated for VF to active queues of VF. Fixes: d5b33d02 ("i40evf: add ndo_setup_tc callback to i40evf") Signed-off-by:
-
Mateusz Palczewski authored
commit 01cbf508 upstream. Hide i40e opcode information sent during response to VF in case when untrusted VF tried to change MAC on the VF interface. This is implemented by adding an additional parameter 'hide' to the response sent to VF function that hides the display of error information, but forwards the error code to VF. Previously it was not possible to send response with some error code to VF without displaying opcode information. Fixes: 5c3c48ac ("i40e: implement virtual device interface") Signed-off-by:
-
Pavel Skripkin authored
commit 754e4382 upstream. Alexander reported a use of uninitialized value in atusb_set_extended_addr(), that is caused by reading 0 bytes via usb_control_msg(). Fix it by validating if the number of bytes transferred is actually correct, since usb_control_msg() may read less bytes, than was requested by caller. Fail log: BUG: KASAN: uninit-cmp in ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] BUG: KASAN: uninit-cmp in atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] BUG: KASAN: uninit-cmp in atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 Uninit value used in comparison: 311daa649a2003bd stack handle: 000000009a2003bd ieee802154_is_valid_extended_unicast_addr include/linux/ieee802154.h:310 [inline] atusb_set_extended_addr drivers/net/ieee802154/atusb.c:1000 [inline] atusb_probe.cold+0x29f/0x14db drivers/net/ieee802154/atusb.c:1056 usb_probe_interface+0x314/0x7f0 drivers/usb/core/driver.c:396 Fixes: 7490b008 ("ieee802154: add support for atusb transceiver") Reported-by:
-
Maor Gottlieb authored
commit 4163cb3d upstream. This patch is not the full fix and still causes to call traces during mlx5_ib_dereg_mr(). This reverts commit f0ae4afe. Fixes: f0ae4afe ("RDMA/mlx5: Fix releasing unallocated memory in dereg MR flow") Link: https://lore.kernel.org/r/20211222101312.1358616-1-maorg@nvidia.com Signed-off-by:
-
Naveen N. Rao authored
commit f28439db upstream. Tag trace_percpu_buffer as a percpu pointer to resolve warnings reported by sparse: /linux/kernel/trace/trace.c:3218:46: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3218:46: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3218:46: got struct trace_buffer_struct * /linux/kernel/trace/trace.c:3234:9: warning: incorrect type in initializer (different address spaces) /linux/kernel/trace/trace.c:3234:9: expected void const [noderef] __percpu *__vpp_verify /linux/kernel/trace/trace.c:3234:9: got int * Link: https://lkml.kernel.org/r/ebabd3f23101d89cb75671b68b6f819f5edc830b.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Reported-by:
-
Naveen N. Rao authored
commit 823e670f upstream. With the new osnoise tracer, we are seeing the below splat: Kernel attempted to read user page (c7d880000) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0xc7d880000 Faulting instruction address: 0xc0000000002ffa10 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries ... NIP [c0000000002ffa10] __trace_array_vprintk.part.0+0x70/0x2f0 LR [c0000000002ff9fc] __trace_array_vprintk.part.0+0x5c/0x2f0 Call Trace: [c0000008bdd73b80] [c0000000001c49cc] put_prev_task_fair+0x3c/0x60 (unreliable) [c0000008bdd73be0] [c000000000301430] trace_array_printk_buf+0x70/0x90 [c0000008bdd73c00] [c0000000003178b0] trace_sched_switch_callback+0x250/0x290 [c0000008bdd73c90] [c000000000e70d60] __schedule+0x410/0x710 [c0000008bdd73d40] [c000000000e710c0] schedule+0x60/0x130 [c0000008bdd73d70] [c000000000030614] interrupt_exit_user_prepare_main+0x264/0x270 [c0000008bdd73de0] [c000000000030a70] syscall_exit_prepare+0x150/0x180 [c0000008bdd73e10] [c00000000000c174] system_call_vectored_common+0xf4/0x278 osnoise tracer on ppc64le is triggering osnoise_taint() for negative duration in get_int_safe_duration() called from trace_sched_switch_callback()->thread_exit(). The problem though is that the check for a valid trace_percpu_buffer is incorrect in get_trace_buf(). The check is being done after calculating the pointer for the current cpu, rather than on the main percpu pointer. Fix the check to be against trace_percpu_buffer. Link: https://lkml.kernel.org/r/a920e4272e0b0635cf20c444707cbce1b2c8973d.1640255304.git.naveen.n.rao@linux.vnet.ibm.com Cc: stable@vger.kernel.org Fixes: e2ace001 ("tracing: Choose static tp_printk buffer by explicit nesting count") Signed-off-by:
-
Shuah Khan authored
commit dd40f44e upstream. Fix the following [-Wstringop-overread] by passing in the variable instead of the value. test_vsyscall.c: In function ‘test_process_vm_readv’: test_vsyscall.c:500:22: warning: ‘__builtin_memcmp_eq’ specified bound 4096 exceeds source size 0 [-Wstringop-overread] 500 | if (!memcmp(buf, (const void *)0xffffffffff600000, 4096)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
-
Dominique Martinet authored
commit 0dc54bd4 upstream. fscache_cookie_enabled() could be called on NULL cookies and cause a null pointer dereference when accessing cookie flags: just make sure the cookie is valid first Suggested-by:
-
- Jan 05, 2022
-
-
Greg Kroah-Hartman authored
Link: https://lore.kernel.org/r/20220103142056.911344037@linuxfoundation.org Tested-by:
-
Adrian Hunter authored
commit 0f80bfbf upstream. The intel-pt-events.py script displays only the last of consecutive switch statements but that may not be the last switch event for the CPU. Fix by keeping a dictionary of last context switch keyed by CPU, and make it possible to see all switch events by adding option --all-switch-events. Fixes: a92bf335 ("perf scripts python: intel-pt-events.py: Add branches to script") Signed-off-by:
-
Adrian Hunter authored
commit 5e0c325c upstream. CPU filtering was not being applied to a script's switch events. Fixes: 5bf83c29 ("perf script: Add scripting operation process_switch()") Signed-off-by:
-
Adrian Hunter authored
commit a78abde2 upstream. Parser did not take ':' into account. Example: Before: $ perf record -e intel_pt//u uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.026 MB perf.data ] $ perf inject -i perf.data --vm-time-correlation="dry-run 123" $ perf inject -i perf.data --vm-time-correlation="dry-run 123:456" Failed to parse VM Time Correlation options 0x620 [0x98]: failed to process type: 70 [Invalid argument] $ After: $ perf inject -i perf.data --vm-time-correlation="dry-run 123:456" $ Fixes: e3ff42bd ("perf intel-pt: Parse VM Time Correlation options and set up decoding") Signed-off-by:
-
Christian Brauner authored
commit 012e3322 upstream. Make sure that finish_mount_kattr() is called after mount_kattr was succesfully built in both the success and failure case to prevent leaking any references we took when we built it. We returned early if path lookup failed thereby risking to leak an additional reference we took when building mount_kattr when an idmapped mount was requested. Cc: linux-fsdevel@vger.kernel.org Cc: stable@vger.kernel.org Fixes: 9caccd41 ("fs: introduce MOUNT_ATTR_IDMAP") Signed-off-by:
-