• Peng Fan's avatar
    qspi:fsl implement AHB read · 5f7f70c1
    Peng Fan authored
    The QSPI controller in i.MX 6SoloX and Vybrid supports reading data using
    IP register and AHB bus.
    The original driver only supports reading data from IP interface. The IC
    team suggests to use AHB read which is faster then IP read. Using AHB read,
    we can directly memcpy, a "missed" access to the buffer will cause the
    controller to clear the buffer and use the SEQID stored in bfgencr register
    to initiate a read from flash device.
    Since AHB bus is 64 bit width, we can not set MCR register using 32bit. In
    order to minimize code change, redefine QSPI_MCR_END_CFD_LE to 64bit Little
    endian but not 32bit Little endia.
    Introduce a new configuration option CONFIG_SYS_FSL_QSPI_AHB. If want to
    use AHB read, just define CONFIG_SYS_FSL_QSPI_AHB. If not, just ignore it.
    Actually if Vybrid is migrated to use AHB read, this option can be removed and
    IP read function can be discared. The reason to introduce this option
    is that only i.MX SOC is tested in my side, no Vybrid platform for me.
    In spi_setup_slave, the original piece code to set AHB is deleted, since
    Vybrid platform does not use this to intiate AHB read. Instead, add
    qspi_init_ahb_read function if defined CONFIG_SYS_FSL_QSPI_AHB.
    Signed-off-by: default avatarPeng Fan <Peng.Fan@freescale.com>
    Reviewed-by: default avatarJagannadha Sutradharudu Teki <jagannadh.teki@gmail.com>
fsl_qspi.h 3.56 KB