- Sep 12, 2020
-
-
Greg Kroah-Hartman authored
Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Florian Westphal authored
[ Upstream commit 1cec170d ] After subflow lock is dropped, more wmem might have been made available. This fixes a deadlock in mptcp_connect.sh 'mmap' mode: wmem is exhausted. But as the mptcp socket holds on to already-acked data (for retransmit) no wakeup will occur. Using 'goto restart' calls mptcp_clean_una(sk) which will free pages that have been acked completely in the mean time. Fixes: fb529e62 ("mptcp: break and restart in case mptcp sndbuf is full") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jakub Kicinski authored
[ Upstream commit 96e97bc0 ] napi_disable() makes sure to set the NAPI_STATE_NPSVC bit to prevent netpoll from accessing rings before init is complete. However, the same is not done for fresh napi instances in netif_napi_add(), even though we expect NAPI instances to be added as disabled. This causes crashes during driver reconfiguration (enabling XDP, changing the channel count) - if there is any printk() after netif_napi_add() but before napi_enable(). To ensure memory ordering is correct we need to use RCU accessors. Reported-by: Rob Sherwood <rsher@fb.com> Fixes: 2d8bff12 ("netpoll: Close race condition between poll_one_napi and napi_disable") Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tuong Lien authored
[ Upstream commit bb8872a1 ] The 'this_cpu_ptr()' is used to obtain the AEAD key' TFM on the current CPU for encryption, however the execution can be preemptible since it's actually user-space context, so the 'using smp_processor_id() in preemptible' has been observed. We fix the issue by using the 'get/put_cpu_ptr()' API which consists of a 'preempt_disable()' instead. Fixes: fc1b6d6d ("tipc: introduce TIPC encryption & authentication") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Tuong Lien <tuong.t.lien@dektech.com.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tetsuo Handa authored
[ Upstream commit 2a63866c ] syzbot is reporting hung task at nbd_ioctl() [1], for there are two problems regarding TIPC's connectionless socket's shutdown() operation. ---------- #include <fcntl.h> #include <sys/socket.h> #include <sys/ioctl.h> #include <linux/nbd.h> #include <unistd.h> int main(int argc, char *argv[]) { const int fd = open("/dev/nbd0", 3); alarm(5); ioctl(fd, NBD_SET_SOCK, socket(PF_TIPC, SOCK_DGRAM, 0)); ioctl(fd, NBD_DO_IT, 0); /* To be interrupted by SIGALRM. */ return 0; } ---------- One problem is that wait_for_completion() from flush_workqueue() from nbd_start_device_ioctl() from nbd_ioctl() cannot be completed when nbd_start_device_ioctl() received a signal at wait_event_interruptible(), for tipc_shutdown() from kernel_sock_shutdown(SHUT_RDWR) from nbd_mark_nsock_dead() from sock_shutdown() from nbd_start_device_ioctl() is failing to wake up a WQ thread sleeping at wait_woken() from tipc_wait_for_rcvmsg() from sock_recvmsg() from sock_xmit() from nbd_read_stat() from recv_work() scheduled by nbd_start_device() from nbd_start_device_ioctl(). Fix this problem by always invoking sk->sk_state_change() (like inet_shutdown() does) when tipc_shutdown() is called. The other problem is that tipc_wait_for_rcvmsg() cannot return when tipc_shutdown() is called, for tipc_shutdown() sets sk->sk_shutdown to SEND_SHUTDOWN (despite "how" is SHUT_RDWR) while tipc_wait_for_rcvmsg() needs sk->sk_shutdown set to RCV_SHUTDOWN or SHUTDOWN_MASK. Fix this problem by setting sk->sk_shutdown to SHUTDOWN_MASK (like inet_shutdown() does) when the socket is connectionless. [1] https://syzkaller.appspot.com/bug?id=3fe51d307c1f0a845485cf1798aa059d12bf18b2 Reported-by: syzbot <syzbot+e36f41d207137b5d12f7@syzkaller.appspotmail.com> Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vinicius Costa Gomes authored
[ Upstream commit 09e31cf0 ] Since commit 9c66d156 ("taprio: Add support for hardware offloading") there's a bit of inconsistency when offloading schedules to the hardware: In software mode, the gate masks are specified in terms of traffic classes, so if say "sched-entry S 03 20000", it means that the traffic classes 0 and 1 are open for 20us; when taprio is offloaded to hardware, the gate masks are specified in terms of hardware queues. The idea here is to fix hardware offloading, so schedules in hardware and software mode have the same behavior. What's needed to do is to map traffic classes to queues when applying the offload to the driver. Fixes: 9c66d156 ("taprio: Add support for hardware offloading") Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xin Long authored
[ Upstream commit 3106ecb4 ] With disabling bh in the whole sctp_get_port_local(), when snum == 0 and too many ports have been used, the do-while loop will take the cpu for a long time and cause cpu stuck: [ ] watchdog: BUG: soft lockup - CPU#11 stuck for 22s! [ ] RIP: 0010:native_queued_spin_lock_slowpath+0x4de/0x940 [ ] Call Trace: [ ] _raw_spin_lock+0xc1/0xd0 [ ] sctp_get_port_local+0x527/0x650 [sctp] [ ] sctp_do_bind+0x208/0x5e0 [sctp] [ ] sctp_autobind+0x165/0x1e0 [sctp] [ ] sctp_connect_new_asoc+0x355/0x480 [sctp] [ ] __sctp_connect+0x360/0xb10 [sctp] There's no need to disable bh in the whole function of sctp_get_port_local. So fix this cpu stuck by removing local_bh_disable() called at the beginning, and using spin_lock_bh() instead. The same thing was actually done for inet_csk_get_port() in Commit ea8add2b ("tcp/dccp: better use of ephemeral ports in bind()"). Thanks to Marcelo for pointing the buggy code out. v1->v2: - use cond_resched() to yield cpu to other tasks if needed, as Eric noticed. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Reported-by: Ying Xu <yinxu@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kamil Lorenc authored
[ Upstream commit a609d025 ] Keenetic Plus DSL is a xDSL modem that uses dm9620 as its USB interface. Signed-off-by: Kamil Lorenc <kamil@re-ws.pl> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paul Moore authored
[ Upstream commit d3b990b7 ] This patch fixes two main problems seen when removing NetLabel mappings: memory leaks and potentially extra audit noise. The memory leaks are caused by not properly free'ing the mapping's address selector struct when free'ing the entire entry as well as not properly cleaning up a temporary mapping entry when adding new address selectors to an existing entry. This patch fixes both these problems such that kmemleak reports no NetLabel associated leaks after running the SELinux test suite. The potentially extra audit noise was caused by the auditing code in netlbl_domhsh_remove_entry() being called regardless of the entry's validity. If another thread had already marked the entry as invalid, but not removed/free'd it from the list of mappings, then it was possible that an additional mapping removal audit record would be generated. This patch fixes this by returning early from the removal function when the entry was previously marked invalid. This change also had the side benefit of improving the code by decreasing the indentation level of large chunk of code by one (accounting for most of the diffstat). Fixes: 63c41688 ("netlabel: Add network address selectors to the NetLabel/LSM domain mapping") Reported-by: Stephen Smalley <stephen.smalley.work@gmail.com> Signed-off-by: Paul Moore <paul@paul-moore.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit 05d44871 ] Cited commit added the possible value of '2', but it cannot be set. Fix it by adjusting the maximum value to '2'. This is consistent with the corresponding IPv4 sysctl. Before: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 sysctl: setting key "net.ipv6.fib_multipath_hash_policy": Invalid argument net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 0 After: # sysctl -w net.ipv6.fib_multipath_hash_policy=2 net.ipv6.fib_multipath_hash_policy = 2 # sysctl net.ipv6.fib_multipath_hash_policy net.ipv6.fib_multipath_hash_policy = 2 Fixes: d8f74f09 ("ipv6: Support multipath hashing on inner IP pkts") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Stephen Suryaputra <ssuryaextr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ido Schimmel authored
[ Upstream commit 7f6f32bb ] fib_info_notify_update() is always called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB table list is traversed with hlist_for_each_entry_rcu(), but without a proper lockdep expression. Since modification of the list is protected by RTNL, silence the warning by adding a lockdep expression which verifies RTNL is held. [1] ============================= WARNING: suspicious RCU usage 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Not tainted ----------------------------- net/ipv4/fib_trie.c:2124 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/834: #0: ffffffff85a3b6b0 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 834 Comm: ip Not tainted 5.9.0-rc1-custom-14233-g2f26e122d62f #129 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x143/0x14d fib_info_notify_update+0x8d1/0xa60 __nexthop_replace_notify+0xd2/0x290 rtm_new_nexthop+0x35e2/0x5946 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x32/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fde28c3be57 Code: 0c 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 89 54 24 1c 48 89 74 24 10 RSP: 002b:00007ffc09330028 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fde28c3be57 RDX: 0000000000000000 RSI: 00007ffc09330090 RDI: 0000000000000003 RBP: 000000005f45f911 R08: 0000000000000001 R09: 00007ffc0933012c R10: 0000000000000076 R11: 0000000000000246 R12: 0000000000000001 R13: 00007ffc09330290 R14: 00007ffc09330eee R15: 00005610e48ed020 Fixes: 1bff1a0c ("ipv4: Add function to send route updates") Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jason Gunthorpe authored
[ Upstream commit f6a9d47a ] When a rdma_cm_id needs to be destroyed after a handler callback fails, part of the destruction pattern is open coded into each call site. Unfortunately the blind assignment to state discards important information needed to do cma_cancel_operation(). This results in active operations being left running after rdma_destroy_id() completes, and the use-after-free bugs from KASAN. Consolidate this entire pattern into destroy_id_handler_unlock() and manage the locking correctly. The state should be set to RDMA_CM_DESTROYING under the handler_lock to atomically ensure no futher handlers are called. Link: https://lore.kernel.org/r/20200723070707.1771101-5-leon@kernel.org Reported-by: <syzbot+08092148130652a6faae@syzkaller.appspotmail.com> Reported-by: <syzbot+a929647172775e335941@syzkaller.appspotmail.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jason Gunthorpe authored
[ Upstream commit cc9c0373 ] The REQ flows are concerned that once the handler is called on the new cm_id the ULP can choose to trigger a rdma_destroy_id() concurrently at any time. However, this is not true, while the ULP can call rdma_destroy_id(), it immediately blocks on the handler_mutex which prevents anything harmful from running concurrently. Remove the confusing extra locking and refcounts and make the handler_mutex protecting state during destroy more clear. Link: https://lore.kernel.org/r/20200723070707.1771101-4-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jason Gunthorpe authored
[ Upstream commit 3647a28d ] Whenever an event is delivered to the handler it should be done under the handler_mutex and upon any non-zero return from the handler it should trigger destruction of the cm_id. cma_process_remove() skips some steps here, it is not necessarily wrong since the state change should prevent any races, but it is confusing and unnecessary. Follow the standard pattern here, with the slight twist that the transition to RDMA_CM_DEVICE_REMOVAL includes a cma_cancel_operation(). Link: https://lore.kernel.org/r/20200723070707.1771101-3-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jason Gunthorpe authored
[ Upstream commit d54f23c0 ] cma_process_remove() triggers an unconditional rdma_destroy_id() for internal_id's and skips the event deliver and transition through RDMA_CM_DEVICE_REMOVAL. This is confusing and unnecessary. internal_id always has cma_listen_handler() as the handler, have it catch the RDMA_CM_DEVICE_REMOVAL event and directly consume it and signal removal. This way the FSM sequence never skips the DEVICE_REMOVAL case and the logic in this hard to test area is simplified. Link: https://lore.kernel.org/r/20200723070707.1771101-2-leon@kernel.org Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Begunkov authored
[ Upstream commit c127a2a1 ] While looking for ->files in ->defer_list, consider that requests there may actually be links. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pavel Begunkov authored
[ Upstream commit b7ddce3c ] While trying to cancel requests with ->files, it also should look for requests in ->defer_list, otherwise it might end up hanging a thread. Cancel all requests in ->defer_list up to the last request there with matching ->files, that's needed to follow drain ordering semantics. Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
- Sep 09, 2020
-
-
Greg Kroah-Hartman authored
Tested-by: Shuah Khan <skhan@linuxfoundation.org> Tested-by: Linux Kernel Functional Testing <lkft@linaro.org> Tested-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Himadri Pandya authored
commit a092b723 upstream. The buffer size is 2 Bytes and we expect to receive the same amount of data. But sometimes we receive less data and run into uninit-was-stored issue upon read. Hence modify the error check on the return value to match with the buffer size as a prevention. Reported-and-tested by: syzbot+a7e220df5a81d1ab400e@syzkaller.appspotmail.com Signed-off-by: Himadri Pandya <himadrispandya@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johannes Berg authored
commit 47caf685 upstream. Reject invalid hints early in order to not cause a kernel WARN later if they're restored to or similar. Reported-by: <syzbot+d451401ffd00a60677ee@syzkaller.appspotmail.com> Link: https://syzkaller.appspot.com/bug?extid=d451401ffd00a60677ee Link: https://lore.kernel.org/r/20200819084648.13956-1-johannes@sipsolutions.net Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David Howells authored
commit e5a59d30 upstream. collapse_file() in khugepaged passes PAGE_SIZE as the number of pages to be read to page_cache_sync_readahead(). The intent was probably to read a single page. Fix it to use the number of pages to the end of the window instead. Fixes: 99cb0dbd ("mm,thp: add read-only THP support for (non-shmem) FS") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Acked-by: Song Liu <songliubraving@fb.com> Acked-by: Yang Shi <shy828301@gmail.com> Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Cc: Eric Biggers <ebiggers@google.com> Link: https://lkml.kernel.org/r/20200903140844.14194-2-willy@infradead.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Muchun Song authored
commit 17743798 upstream. There is a race between the assignment of `table->data` and write value to the pointer of `table->data` in the __do_proc_doulongvec_minmax() on the other thread. CPU0: CPU1: proc_sys_write hugetlb_sysctl_handler proc_sys_call_handler hugetlb_sysctl_handler_common hugetlb_sysctl_handler table->data = &tmp; hugetlb_sysctl_handler_common table->data = &tmp; proc_doulongvec_minmax do_proc_doulongvec_minmax sysctl_head_finish __do_proc_doulongvec_minmax unuse_table i = table->data; *i = val; // corrupt CPU1's stack Fix this by duplicating the `table`, and only update the duplicate of it. And introduce a helper of proc_hugetlb_doulongvec_minmax() to simplify the code. The following oops was seen: BUG: kernel NULL pointer dereference, address: 0000000000000000 #PF: supervisor instruction fetch in kernel mode #PF: error_code(0x0010) - not-present page Code: Bad RIP value. ... Call Trace: ? set_max_huge_pages+0x3da/0x4f0 ? alloc_pool_huge_page+0x150/0x150 ? proc_doulongvec_minmax+0x46/0x60 ? hugetlb_sysctl_handler_common+0x1c7/0x200 ? nr_hugepages_store+0x20/0x20 ? copy_fd_bitmaps+0x170/0x170 ? hugetlb_sysctl_handler+0x1e/0x20 ? proc_sys_call_handler+0x2f1/0x300 ? unregister_sysctl_table+0xb0/0xb0 ? __fd_install+0x78/0x100 ? proc_sys_write+0x14/0x20 ? __vfs_write+0x4d/0x90 ? vfs_write+0xef/0x240 ? ksys_write+0xc0/0x160 ? __ia32_sys_read+0x50/0x50 ? __close_fd+0x129/0x150 ? __x64_sys_write+0x43/0x50 ? do_syscall_64+0x6c/0x200 ? entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e5ff2159 ("hugetlb: multiple hstates for multiple page sizes") Signed-off-by: Muchun Song <songmuchun@bytedance.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Andi Kleen <ak@linux.intel.com> Link: http://lkml.kernel.org/r/20200828031146.43035-1-songmuchun@bytedance.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Li Xinhai authored
commit 953f064a upstream. Since commit cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma"), the gigantic page would be allocated from node which is not the preferred node, although there are pages available from that node. The reason is that the nid parameter has been ignored in alloc_gigantic_page(). Besides, the __GFP_THISNODE also need be checked if user required to alloc only from the preferred node. After this patch, the preferred node is tried first before other allowed nodes, and don't try to allocate from other nodes if __GFP_THISNODE is specified. If user don't specify the preferred node, the current node will be used as preferred node, which makes sure consistent behavior of allocating gigantic and non-gigantic hugetlb page. Fixes: cf11e85f ("mm: hugetlb: optionally allocate gigantic hugepages using cma") Signed-off-by: Li Xinhai <lixinhai.lxh@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Roman Gushchin <guro@fb.com> Link: https://lkml.kernel.org/r/20200902025016.697260-1-lixinhai.lxh@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alistair Popple authored
commit ebdf8321 upstream. Commit f45ec5ff ("userfaultfd: wp: support swap and page migration") introduced support for tracking the uffd wp bit during page migration. However the non-swap PTE variant was used to set the flag for zone device private pages which are a type of swap page. This leads to corruption of the swap offset if the original PTE has the uffd_wp flag set. Fixes: f45ec5ff ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Link: https://lkml.kernel.org/r/20200825064232.10023-1-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mrinal Pandey authored
commit 13e45417 upstream. The usage of "capture group (...)" in the immediate condition after `&&` results in `$1` being uninitialized. This issues a warning "Use of uninitialized value $1 in regexp compilation at ./scripts/checkpatch.pl line 2638". I noticed this bug while running checkpatch on the set of commits from v5.7 to v5.8-rc1 of the kernel on the commits with a diff content in their commit message. This bug was introduced in the script by commit e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog"). It has been in the script since then. The author intended to store the match made by capture group in variable `$1`. This should have contained the name of the file as `[\w/]+` matched. However, this couldn't be accomplished due to usage of capture group and `$1` in the same regular expression. Fix this by placing the capture group in the condition before `&&`. Thus, `$1` can be initialized to the text that capture group matches thereby setting it to the desired and required value. Fixes: e518e9a5 ("checkpatch: emit an error when there's a diff in a changelog") Signed-off-by: Mrinal Pandey <mrinalmni@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com> Cc: Joe Perches <joe@perches.com> Link: https://lkml.kernel.org/r/20200714032352.f476hanaj2dlmiot@mrinalpandey Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Sowjanya Komatineni authored
commit 8048822b upstream. commit b5a84ecf ("mmc: tegra: Add Tegra210 support") Tegra210 and later has a separate sdmmc_legacy_tm (TMCLK) used by Tegra SDMMC hawdware for data timeout to achive better timeout than using SDCLK and using TMCLK is recommended. USE_TMCLK_FOR_DATA_TIMEOUT bit in Tegra SDMMC register SDHCI_TEGRA_VENDOR_SYS_SW_CTRL can be used to choose either TMCLK or SDCLK for data timeout. Default USE_TMCLK_FOR_DATA_TIMEOUT bit is set to 1 and TMCLK is used for data timeout by Tegra SDMMC hardware and having TMCLK not enabled is not recommended. So, this patch adds quirk NVQUIRK_HAS_TMCLK for SoC having separate timeout clock and keeps TMCLK enabled all the time. Fixes: b5a84ecf ("mmc: tegra: Add Tegra210 support") Cc: stable <stable@vger.kernel.org> # 5.4 Tested-by: Jon Hunter <jonathanh@nvidia.com> Reviewed-by: Jon Hunter <jonathanh@nvidia.com> Acked-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Sowjanya Komatineni <skomatineni@nvidia.com> Link: https://lore.kernel.org/r/1598548861-32373-8-git-send-email-skomatineni@nvidia.com Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Randy Dunlap authored
commit a73fbfce upstream. A user reported: 'Use of uninitialized value $ENV{"LMC_KEEP"} in split at ./scripts/kconfig/streamline_config.pl line 596.' so first check that $ENV{LMC_KEEP} is defined before trying to use it. Fixes: c027b02d ("streamline_config.pl: add LMC_KEEP to preserve some kconfigs") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Wei Li authored
commit a060c1f1 upstream. The help info of option "--no-bpf-event" is wrongly described as "record bpf events", correct it. Committer testing: $ perf record -h bpf Usage: perf record [<options>] [<command>] or: perf record [<options>] -- <command> [<options>] --clang-opt <clang options> options passed to clang when compiling BPF scriptlets --clang-path <clang path> clang binary to use for compiling BPF scriptlets --no-bpf-event do not record bpf events $ Fixes: 71184c6a ("perf record: Replace option --bpf-event with --no-bpf-event") Signed-off-by: Wei Li <liwei391@huawei.com> Acked-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Hanjun Guo <guohanjun@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Bin <huawei.libin@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200819031947.12115-1-liwei391@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Jens Axboe authored
commit 355afaeb upstream. Actually two things that need fixing up here: - The io_rw_reissue() -EAGAIN retry is explicit to block devices and regular files, so don't ever attempt to do that on other types of files. - If we hit -EAGAIN on a nonblock marked file, don't arm poll handler for it. It should just complete with -EAGAIN. Cc: stable@vger.kernel.org Reported-by: Norman Maurer <norman.maurer@googlemail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Alistair Popple authored
commit ad7df764 upstream. During memory migration a pte is temporarily replaced with a migration swap pte. Some pte bits from the existing mapping such as the soft-dirty and uffd write-protect bits are preserved by copying these to the temporary migration swap pte. However these bits are not stored at the same location for swap and non-swap ptes. Therefore testing these bits requires using the appropriate helper function for the given pte type. Unfortunately several code locations were found where the wrong helper function is being used to test soft_dirty and uffd_wp bits which leads to them getting incorrectly set or cleared during page-migration. Fix these by using the correct tests based on pte type. Fixes: a5430dda ("mm/migrate: support un-addressable ZONE_DEVICE page in migration") Fixes: 8c3328f1 ("mm/migrate: migrate_vma() unmap page from vma while collecting pages") Fixes: f45ec5ff ("userfaultfd: wp: support swap and page migration") Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: Jérôme Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Ralph Campbell <rcampbell@nvidia.com> Cc: Alistair Popple <alistair@popple.id.au> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200825064232.10023-2-alistair@popple.id.au Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Yang Shi authored
commit 7867fd7c upstream. The syzbot reported the below use-after-free: BUG: KASAN: use-after-free in madvise_willneed mm/madvise.c:293 [inline] BUG: KASAN: use-after-free in madvise_vma mm/madvise.c:942 [inline] BUG: KASAN: use-after-free in do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 Read of size 8 at addr ffff8880a6163eb0 by task syz-executor.0/9996 CPU: 0 PID: 9996 Comm: syz-executor.0 Not tainted 5.9.0-rc1-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x18f/0x20d lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 madvise_willneed mm/madvise.c:293 [inline] madvise_vma mm/madvise.c:942 [inline] do_madvise.part.0+0x1c8b/0x1cf0 mm/madvise.c:1145 do_madvise mm/madvise.c:1169 [inline] __do_sys_madvise mm/madvise.c:1171 [inline] __se_sys_madvise mm/madvise.c:1169 [inline] __x64_sys_madvise+0xd9/0x110 mm/madvise.c:1169 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Allocated by task 9992: kmem_cache_alloc+0x138/0x3a0 mm/slab.c:3482 vm_area_alloc+0x1c/0x110 kernel/fork.c:347 mmap_region+0x8e5/0x1780 mm/mmap.c:1743 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 9992: kmem_cache_free.part.0+0x67/0x1f0 mm/slab.c:3693 remove_vma+0x132/0x170 mm/mmap.c:184 remove_vma_list mm/mmap.c:2613 [inline] __do_munmap+0x743/0x1170 mm/mmap.c:2869 do_munmap mm/mmap.c:2877 [inline] mmap_region+0x257/0x1780 mm/mmap.c:1716 do_mmap+0xcf9/0x11d0 mm/mmap.c:1545 vm_mmap_pgoff+0x195/0x200 mm/util.c:506 ksys_mmap_pgoff+0x43a/0x560 mm/mmap.c:1596 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 It is because vma is accessed after releasing mmap_lock, but someone else acquired the mmap_lock and the vma is gone. Releasing mmap_lock after accessing vma should fix the problem. Fixes: 692fe624 ("mm: Handle MADV_WILLNEED through vfs_fadvise()") Reported-by: <syzbot+b90df26038d1d5d85c97@syzkaller.appspotmail.com> Signed-off-by: Yang Shi <shy828301@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Jan Kara <jack@suse.cz> Cc: <stable@vger.kernel.org> [5.4+] Link: https://lkml.kernel.org/r/20200816141204.162624-1-shy828301@gmail.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Joerg Roedel authored
commit e80d3909 upstream. __apply_to_page_range() is also used to change and/or allocate page-table pages in the vmalloc area of the address space. Make sure these changes get synchronized to other page-tables in the system by calling arch_sync_kernel_mappings() when necessary. The impact appears limited to x86-32, where apply_to_page_range may miss updating the PMD. That leads to explosions in drivers like BUG: unable to handle page fault for address: fe036000 #PF: supervisor write access in kernel mode #PF: error_code(0x0002) - not-present page *pde = 00000000 Oops: 0002 [#1] SMP CPU: 3 PID: 1300 Comm: gem_concurrent_ Not tainted 5.9.0-rc1+ #16 Hardware name: /NUC6i3SYB, BIOS SYSKLi35.86A.0024.2015.1027.2142 10/27/2015 EIP: __execlists_context_alloc+0x132/0x2d0 [i915] Code: 31 d2 89 f0 e8 2f 55 02 00 89 45 e8 3d 00 f0 ff ff 0f 87 11 01 00 00 8b 4d e8 03 4b 30 b8 5a 5a 5a 5a ba 01 00 00 00 8d 79 04 <c7> 01 5a 5a 5a 5a c7 81 fc 0f 00 00 5a 5a 5a 5a 83 e7 fc 29 f9 81 EAX: 5a5a5a5a EBX: f60ca000 ECX: fe036000 EDX: 00000001 ESI: f43b7340 EDI: fe036004 EBP: f6389cb8 ESP: f6389c9c DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010286 CR0: 80050033 CR2: fe036000 CR3: 2d361000 CR4: 001506d0 DR0: 00000000 DR1: 00000000 DR2: 00000000 DR3: 00000000 DR6: fffe0ff0 DR7: 00000400 Call Trace: execlists_context_alloc+0x10/0x20 [i915] intel_context_alloc_state+0x3f/0x70 [i915] __intel_context_do_pin+0x117/0x170 [i915] i915_gem_do_execbuffer+0xcc7/0x2500 [i915] i915_gem_execbuffer2_ioctl+0xcd/0x1f0 [i915] drm_ioctl_kernel+0x8f/0xd0 drm_ioctl+0x223/0x3d0 __ia32_sys_ioctl+0x1ab/0x760 __do_fast_syscall_32+0x3f/0x70 do_fast_syscall_32+0x29/0x60 do_SYSENTER_32+0x15/0x20 entry_SYSENTER_32+0x9f/0xf2 EIP: 0xb7f28559 Code: 03 74 c0 01 10 05 03 74 b8 01 10 06 03 74 b4 01 10 07 03 74 b0 01 10 08 03 74 d8 01 00 00 00 00 00 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: ffffffda EBX: 00000005 ECX: c0406469 EDX: bf95556c ESI: b7e68000 EDI: c0406469 EBP: 00000005 ESP: bf9554d8 DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000296 Modules linked in: i915 x86_pkg_temp_thermal intel_powerclamp crc32_pclmul crc32c_intel intel_cstate intel_uncore intel_gtt drm_kms_helper intel_pch_thermal video button autofs4 i2c_i801 i2c_smbus fan CR2: 00000000fe036000 It looks like kasan, xen and i915 are vulnerable. Actual impact is "on thinkpad X60 in 5.9-rc1, screen starts blinking after 30-or-so minutes, and machine is unusable" [sfr@canb.auug.org.au: ARCH_PAGE_TABLE_SYNC_MASK needs vmalloc.h] Link: https://lkml.kernel.org/r/20200825172508.16800a4f@canb.auug.org.au [chris@chris-wilson.co.uk: changelog addition] [pavel@ucw.cz: changelog addition] Fixes: 2ba3e694 ("mm/vmalloc: track which page-table levels were modified") Fixes: 86cf69f1 ("x86/mm/32: implement arch_sync_kernel_mappings()") Signed-off-by: Joerg Roedel <jroedel@suse.de> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Tested-by: Chris Wilson <chris@chris-wilson.co.uk> [x86-32] Tested-by: Pavel Machek <pavel@ucw.cz> Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.8+] Link: https://lkml.kernel.org/r/20200821123746.16904-1-joro@8bytes.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eugeniu Rosca authored
commit dc07a728 upstream. Commit 52f23478 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") suffered an update when picked up from LKML [1]. Specifically, relocating 'freelist = NULL' into 'freelist_corrupted()' created a no-op statement. Fix it by sticking to the behavior intended in the original patch [1]. In addition, make freelist_corrupted() immune to passing NULL instead of &freelist. The issue has been spotted via static analysis and code review. [1] https://lore.kernel.org/linux-mm/20200331031450.12182-1-dongli.zhang@oracle.com/ Fixes: 52f23478 ("mm/slub.c: fix corrupted freechain in deactivate_slab()") Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dongli Zhang <dongli.zhang@oracle.com> Cc: Joe Jin <joe.jin@oracle.com> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: <stable@vger.kernel.org> Link: https://lkml.kernel.org/r/20200824130643.10291-1-erosca@de.adit-jv.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit 3a653b20 upstream. The following error ocurred when testing disk online/offline: [ 301.798344] device-mapper: thin: 253:5: aborting current metadata transaction [ 301.848441] device-mapper: thin: 253:5: failed to abort metadata transaction [ 301.849206] Aborting journal on device dm-26-8. [ 301.850489] EXT4-fs error (device dm-26) in __ext4_new_inode:943: Journal has aborted [ 301.851095] EXT4-fs (dm-26): Delayed block allocation failed for inode 398742 at logical offset 181 with max blocks 19 with error 30 [ 301.854476] BUG: KASAN: use-after-free in dm_bm_set_read_only+0x3a/0x40 [dm_persistent_data] Reason is: metadata_operation_failed abort_transaction dm_pool_abort_metadata __create_persistent_data_objects r = __open_or_format_metadata if (r) --> If failed will free pmd->bm but pmd->bm not set NULL dm_block_manager_destroy(pmd->bm); set_pool_mode dm_pool_metadata_read_only(pool->pmd); dm_bm_set_read_only(pmd->bm); --> use-after-free Add checks to see if pmd->bm is NULL in dm_bm_set_read_only and dm_bm_set_read_write functions. If bm is NULL it means creating the bm failed and so dm_bm_is_read_only must return true. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit 219403d7 upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ye Bin authored
commit d16ff19e upstream. Maybe __create_persistent_data_objects() caller will use PTR_ERR as a pointer, it will lead to some strange things. Signed-off-by: Ye Bin <yebin10@huawei.com> Cc: stable@vger.kernel.org Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Damien Le Moal authored
commit 7785a9e4 upstream. Use the DECLARE_CRYPTO_WAIT() macro to properly initialize the crypto wait structures declared on stack before their use with crypto_wait_req(). Fixes: 39d13a1a ("dm crypt: reuse eboiv skcipher for IV generation") Fixes: bbb16584 ("dm crypt: Implement Elephant diffuser for Bitlocker compatibility") Cc: stable@vger.kernel.org Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit e27fec66 upstream. The dm-integrity target did not report errors in bitmap mode just after creation. The reason is that the function integrity_recalc didn't clean up ic->recalc_bitmap as it proceeded with recalculation. Fix this by updating the bitmap accordingly -- the double shift serves to rounddown. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 468dfca3 ("dm integrity: add a bitmap mode") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mike Snitzer authored
commit c322ee93 upstream. Commit 935fcc56 ("dm mpath: only flush workqueue when needed") changed flush_multipath_work() to avoid needless workqueue flushing (of a multipath global workqueue). But that change didn't realize the surrounding flush_multipath_work() code should also only run if 'pg_init_in_progress' is set. Fix this by only doing all of flush_multipath_work()'s PG init related work if 'pg_init_in_progress' is set. Otherwise multipath_wait_for_pg_init_completion() will run unconditionally but the preceeding flush_workqueue(kmpath_handlerd) may not. This could lead to deadlock (though only if kmpath_handlerd never runs a corresponding work to decrement 'pg_init_in_progress'). It could also be, though highly unlikely, that the kmpath_handlerd work that does PG init completes before 'pg_init_in_progress' is set, and then an intervening DM table reload's multipath_postsuspend() triggers flush_multipath_work(). Fixes: 935fcc56 ("dm mpath: only flush workqueue when needed") Cc: stable@vger.kernel.org Reported-by: Ben Marzinski <bmarzins@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mikulas Patocka authored
commit f9e040ef upstream. The function dax_direct_access doesn't take partitions into account, it always maps pages from the beginning of the device. Therefore, persistent_memory_claim() must get the partition offset using get_start_sect() and add it to the page offsets passed to dax_direct_access(). Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Fixes: 48debafe ("dm: add writecache target") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-