- Apr 29, 2020
-
-
Greg Kroah-Hartman authored
-
Christian Borntraeger authored
commit 316ec154 upstream. A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # 4.15+ Reported-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> References: CVE-2020-11884 Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit feb8e960 upstream. CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32 which doesn't exists. Fixing it leads to a deadlock due to a vital register getting clobbered in _switch(). Change dependency to PPC32 and use r0 instead of r4 in _switch() Fixes: e2fb9f54 ("powerpc/32: Prepare for Kernel Userspace Access Protection") Cc: stable@vger.kernel.org # v5.2+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael Ellerman authored
commit 61da50b7 upstream. Currently you can enable PPC_KUAP_DEBUG when PPC_KUAP is disabled, even though the former has not effect without the latter. Fix it so that PPC_KUAP_DEBUG can only be enabled when PPC_KUAP is enabled, not when the platform could support KUAP (PPC_HAVE_KUAP). Fixes: 890274c2 ("powerpc/64s: Implement KUAP for Radix MMU") Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200301111738.22497-1-mpe@ellerman.id.au Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Wilson authored
commit e1eb075c upstream. If we use a non-forcewaked write to PMINTRMSK, it does not take effect until much later, if at all, causing a loss of RPS interrupts and no GPU reclocking, leaving the GPU running at the wrong frequency for long periods of time. Reported-by: Francisco Jerez <currojerez@riseup.net> Suggested-by: Francisco Jerez <currojerez@riseup.net> Fixes: 35cc7f32 ("drm/i915/gt: Use non-forcewake writes for RPS") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Francisco Jerez <currojerez@riseup.net> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Reviewed-by: Francisco Jerez <currojerez@riseup.net> Cc: <stable@vger.kernel.org> # v5.6+ Link: https://patchwork.freedesktop.org/patch/msgid/20200415170318.16771-2-chris@chris-wilson.co.uk (cherry picked from commit a080bd99) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 18cc7ac8 upstream. This reverts commit 024ca329. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/1ee35667e36a8efddee381df5fe495ad65f4d15c.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 492cc08b upstream. This reverts commit bed25ac0. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/eb0ec98fecdca9b79c1a3ac0c30c668b6973b193.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 72d68197 upstream. This reverts commit ae1cca3f. With setting up NR_PORTS to 16 to be able to use serial2 and higher aliases and don't loose functionality which was intended by these changes. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/a94931b65ce0089f76fb1fe6b446a08731bff754.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 91c9dfa2 upstream. This reverts commit 2088cfd8. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/dac3898e3e32d963f357fb436ac9a7ac3cbcf933.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit b6fd2dbb upstream. This reverts commit 32cf21ac. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/46cd7f039db847c08baa6508edd7854f7c8ff80f.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 8da1a394 upstream. This reverts commit ab262666. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/14a565fc1e14a5ec6cc6a6710deb878ae8305f22.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michal Simek authored
commit 2e01911b upstream. This reverts commit 5e9bd2d7. As Johan says, this driver needs a lot more work and these changes are only going in the wrong direction: https://lkml.kernel.org/r/20190523091839.GC568@localhost Reported-by: Johan Hovold <johan@kernel.org> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/310999ab5342f788a7bc1b0e68294d4f052cad07.1585905873.git.michal.simek@xilinx.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Kazuhiro Fujita authored
commit 3dc4db36 upstream. For SCIF and HSCIF interfaces the SCxSR register holds the status of data that is to be read next from SCxRDR register, But where as for SCIFA and SCIFB interfaces SCxSR register holds status of data that is previously read from SCxRDR register. This patch makes sure the status register is read depending on the port types so that errors are caught accordingly. Cc: <stable@vger.kernel.org> Signed-off-by: Kazuhiro Fujita <kazuhiro.fujita.jg@renesas.com> Signed-off-by: Hao Bui <hao.bui.yg@renesas.com> Signed-off-by: KAZUMI HARADA <kazumi.harada.rh@renesas.com> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/1585333048-31828-1-git-send-email-kazuhiro.fujita.jg@renesas.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 8f97250c upstream. The default control endpoint ep0 can return a STALL indicating the device does not support the control transfer requests. This is called a protocol stall and does not halt the endpoint. xHC behaves a bit different. Its internal endpoint state will always be halted on any stall, even if the device side of the endpiont is not halted. So we do need to issue the reset endpoint command to clear the xHC host intenal endpoint halt state, but should not request the HS hub to clear the TT buffer unless device side of endpoint is halted. Clearing the hub TT buffer at protocol stall caused ep0 to become unresponsive for some FS/LS devices behind HS hubs, and class drivers failed to set the interface due to timeout: usb 1-2.1: 1:1: usb_set_interface failed (-110) Fixes: ef513be0 ("usb: xhci: Add Clear_TT_Buffer") Cc: <stable@vger.kernel.org> # v5.3 Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200421140822.28233-4-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit e9fb08d6 upstream. Suspending the bus and host controller while a port is in a over-current condition may halt the host. Also keep the roothub running if over-current is active. Cc: <stable@vger.kernel.org> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200421140822.28233-3-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Mathias Nyman authored
commit 93ceaa80 upstream. If a class driver cancels its only URB then the endpoint ring buffer will appear empty to the xhci driver. xHC hardware may still process cached TRBs, and complete with a STALL, halting the endpoint. This halted endpoint was not handled correctly by xhci driver as events on empty rings were all assumed to be spurious events. xhci driver refused to restart the ring with EP_HALTED flag set, so class driver was never informed the endpoint halted even if it queued new URBs. The host side of the endpoint needs to be reset, and dequeue pointer should be moved in order to clear the cached TRBs and resetart the endpoint. Small adjustments in finding the new dequeue pointer are needed to support the case of stall on an empty ring and unknown current TD. Cc: <stable@vger.kernel.org> cc: Jeremy Compostella <jeremy.compostella@intel.com> Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Link: https://lore.kernel.org/r/20200421140822.28233-2-mathias.nyman@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Naoki Kiryu authored
commit 0df9433f upstream. Before this commit, typec_altmode_get_partner would return a const struct typec_altmode * pointing to address 0x08 when to_altmode(adev)->partner was NULL. Add a check for to_altmode(adev)->partner being NULL to fix this. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=206365 BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1785972 Fixes: 5f54a85d ("usb: typec: Make sure an alt mode exist before getting its partner") Cc: stable@vger.kernel.org Signed-off-by: Naoki Kiryu <naonaokiryu2@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20200422144345.43262-1-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Badhri Jagan Sridharan authored
commit 90178974 upstream. After PORT_RESET, the port is set to the appropriate default_state. Ignore processing CC changes here as this could cause the port to be switched into sink states by default. echo source > /sys/class/typec/port0/port_type Before: [ 154.528547] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [ 154.528560] CC1: 0 -> 0, CC2: 3 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 154.528564] state change PORT_RESET -> SNK_UNATTACHED After: [ 151.068814] pending state change PORT_RESET -> PORT_RESET_WAIT_OFF @ 100 ms [rev3 NONE_AMS] [ 151.072440] CC1: 3 -> 0, CC2: 0 -> 0 [state PORT_RESET, polarity 0, disconnected] [ 151.172117] state change PORT_RESET -> PORT_RESET_WAIT_OFF [delayed 100 ms] [ 151.172136] pending state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED @ 870 ms [rev3 NONE_AMS] [ 152.060106] state change PORT_RESET_WAIT_OFF -> SRC_UNATTACHED [delayed 870 ms] [ 152.060118] Start toggling Signed-off-by: Badhri Jagan Sridharan <badhri@google.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20200402215947.176577-1-badhri@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Udipto Goswami authored
commit 1c2e54fb upstream. For userspace functions using OS Descriptors, if a function also supplies Extended Property descriptors currently the counts and lengths stored in the ms_os_descs_ext_prop_{count,name_len,data_len} variables are not getting reset to 0 during an unbind or when the epfiles are closed. If the same function is re-bound and the descriptors are re-written, this results in those count/length variables to monotonically increase causing the VLA allocation in _ffs_func_bind() to grow larger and larger at each bind/unbind cycle and eventually fail to allocate. Fix this by clearing the ms_os_descs_ext_prop count & lengths to 0 in ffs_data_reset(). Fixes: f0175ab5 ("usb: gadget: f_fs: OS descriptors support") Cc: stable@vger.kernel.org Signed-off-by: Udipto Goswami <ugoswami@codeaurora.org> Signed-off-by: Sriharsha Allenki <sallenki@codeaurora.org> Reviewed-by: Manu Gautam <mgautam@codeaurora.org> Link: https://lore.kernel.org/r/20200402044521.9312-1-sallenki@codeaurora.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Thinh Nguyen authored
commit 49e0590e upstream. A request may not be completed because not all the TRBs are prepared for it. This happens when we run out of available TRBs. When some TRBs are completed, the driver needs to prepare the rest of the TRBs for the request. The check dwc3_gadget_ep_request_completed() shouldn't be checking the amount of data received but rather the number of pending TRBs. Revise this request completion check. Cc: stable@vger.kernel.org Fixes: e0c42ce5 ("usb: dwc3: gadget: simplify IOC handling") Signed-off-by: Thinh Nguyen <thinhn@synopsys.com> Signed-off-by: Felipe Balbi <balbi@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xu Yilun authored
commit 3c2760b7 upstream. pci_driver.sriov_configure should return negative value on error and number of enabled VFs on success. But now the driver returns 0 on success. The sriov configure still works but will cause a warning message: XX VFs requested; only 0 enabled This patch changes the return value accordingly. Cc: stable@vger.kernel.org Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Signed-off-by: Moritz Fischer <mdf@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit f6cc6093 upstream. A SCSI error handler and block runtime PM must not allocate memory with GFP_KERNEL. Furthermore they must not wait for tasks allocating memory with GFP_KERNEL. That means that they cannot share a workqueue with arbitrary tasks. Fix this for UAS using a private workqueue. Signed-off-by: Oliver Neukum <oneukum@suse.com> Fixes: f9dc024a ("uas: pre_reset and suspend: Fix a few races") Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200415141750.811-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 5963dec9 upstream. Once a device is gone, the internal state does not matter anymore. There is no need to spam the logs. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Fixes: 326349f8 ("uas: add dead request list") Link: https://lore.kernel.org/r/20200415141750.811-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit a4e7279c upstream. Immediate submission in case of a babbling device can lead to a busy loop. Introducing a delayed work. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Tested-by: Jonas Karlsson <jonas.karlsson@actia.se> Link: https://lore.kernel.org/r/20200415151358.32664-2-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Oliver Neukum authored
commit 0afccd76 upstream. Suspend increments a counter, then kills the URBs, then kills the scheduled work. The scheduled work, however, may reschedule the URBs. Fix this by having the work check the counter. Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Tested-by: Jonas Karlsson <jonas.karlsson@actia.se> Link: https://lore.kernel.org/r/20200415151358.32664-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Benjamin Lee authored
commit fec874a8 upstream. Commit 261b3e1f ("mei: me: store irq number in the hw struct.") stores the irq number in the hw struct before MSI is enabled. This caused a regression for mei_me_synchronize_irq() waiting for the wrong irq number. On my laptop this causes a hang on shutdown. Fix the issue by storing the irq number after enabling MSI. Fixes: 261b3e1f ("mei: me: store irq number in the hw struct.") Signed-off-by: Benjamin Lee <ben@b1c1l1.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200417184538.349550-1-ben@b1c1l1.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit ea81c348 upstream. conf.listen_interval can sometimes be zero causing wake_up_count to wrap around up to many beacons too late causing CTRL-EVENT-BEACON-LOSS as in. wpa_supplicant[795]: message repeated 45 times: [..CTRL-EVENT-BEACON-LOSS ] Fixes: 43c93d9b ("staging: vt6656: implement power saving code.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/fce47bb5-7ca6-7671-5094-5c6107302f2b@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit 0b59f10b upstream. The problem is that the group key was saved as VNT_KEY_DEFAULTKEY was over written by the VNT_KEY_GROUP_ADDRESS index. mac80211 could not clear the mac_addr in the default key. The VNT_KEY_DEFAULTKEY is not necesscary so remove it and set as VNT_KEY_GROUP_ADDRESS. mac80211 can clear any key using vnt_mac_disable_keyentry. Fixes: f9ef05ce ("staging: vt6656: Fix pairwise key for non station modes") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/da2f7e7f-1658-1320-6eee-0f55770ca391@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit 09057742 upstream. The drivers TBTT counter is not synchronized with mac80211 timestamp. Reorder the functions and use vnt_update_next_tbtt to do the final synchronize. Fixes: c1515879 ("staging: vt6656: implement TSF counter") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/375d0b25-e8bc-c8f7-9b10-6cc705d486ee@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit 664ba518 upstream. vnt_set_bss_mode needs to be called on all changes to BSS_CHANGED_BASIC_RATES, BSS_CHANGED_ERP_PREAMBLE and BSS_CHANGED_ERP_SLOT Remove all other calls and vnt_update_ifs which is called in vnt_set_bss_mode. Fixes an issue that preamble mode is not being updated correctly. Fixes: c1260357 ("staging: vt6656: Only call vnt_set_bss_mode on basic rates change.") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/44110801-6234-50d8-c583-9388f04b486c@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Malcolm Priestley authored
commit 0f8240bf upstream. mac80211/users control whether multicast is on or off don't enable it by default. Fixes an issue when multicast/broadcast is always on allowing other beacons through in power save. Fixes: db8f37fa ("staging: vt6656: mac80211 conversion: main_usb add functions...") Cc: stable <stable@vger.kernel.org> Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Link: https://lore.kernel.org/r/2c24c33d-68c4-f343-bd62-105422418eac@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 9a98e7a8 upstream. Even if the actual screen size is bounded in vc_do_resize(), the unicode buffer is still a little more than twice the size of the glyph buffer and may exceed MAX_ORDER down the kmalloc() path. This can be triggered from user space. Since there is no point having a physically contiguous buffer here, let's avoid the above issue as well as reducing pressure on high order allocations by using vmalloc() instead. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Cc: <stable@vger.kernel.org> Acked-by: Sam Ravnborg <sam@ravnborg.org> Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003282214210.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Pitre authored
commit 2717769e upstream. The code in vc_do_resize() bounds the memory allocation size to avoid exceeding MAX_ORDER down the kzalloc() call chain and generating a runtime warning triggerable from user space. However, not only is it unwise to use a literal value here, but MAX_ORDER may also be configurable based on CONFIG_FORCE_MAX_ZONEORDER. Let's use KMALLOC_MAX_SIZE instead. Note that prior commit bb1107f7 ("mm, slab: make sure that KMALLOC_MAX_SIZE will fit into MAX_ORDER") the KMALLOC_MAX_SIZE value could not be relied upon. Signed-off-by: Nicolas Pitre <nico@fluxnic.net> Cc: <stable@vger.kernel.org> # v4.10+ Link: https://lore.kernel.org/r/nycvar.YSQ.7.76.2003281702410.2671@knanqh.ubzr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Xiyu Yang authored
commit 332e0e17 upstream. comedi_open() invokes comedi_dev_get_from_minor(), which returns a reference of the COMEDI device to "dev" with increased refcount. When comedi_open() returns, "dev" becomes invalid, so the refcount should be decreased to keep refcount balanced. The reference counting issue happens in one exception handling path of comedi_open(). When "cfp" allocation is failed, the refcnt increased by comedi_dev_get_from_minor() is not decreased, causing a refcnt leak. Fix this issue by calling comedi_dev_put() on this error path when "cfp" allocation is failed. Fixes: 20f083c0 ("staging: comedi: prepare support for per-file read and write subdevices") Signed-off-by: Xiyu Yang <xiyuyang19@fudan.edu.cn> Cc: stable <stable@vger.kernel.org> Signed-off-by: Xin Tan <tanxin.ctf@gmail.com> Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Link: https://lore.kernel.org/r/1587361459-83622-1-git-send-email-xiyuyang19@fudan.edu.cn Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ian Abbott authored
commit ed87d33d upstream. The DT2815 analog output command is 16 bits wide, consisting of the 12-bit sample value in bits 15 to 4, the channel number in bits 3 to 1, and a voltage or current selector in bit 0. Both bytes of the 16-bit command need to be written in turn to a single 8-bit data register. However, the driver currently only writes the low 8-bits. It is broken and appears to have always been broken. Electronic copies of the DT2815 User's Manual seem impossible to find online, but looking at the source code, a best guess for the sequence the driver intended to use to write the analog output command is as follows: 1. Wait for the status register to read 0x00. 2. Write the low byte of the command to the data register. 3. Wait for the status register to read 0x80. 4. Write the high byte of the command to the data register. Step 4 is missing from the driver. Add step 4 to (hopefully) fix the driver. Also add a "FIXME" comment about setting bit 0 of the low byte of the command. Supposedly, it is used to choose between voltage output and current output, but the current driver always sets it to 1. Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20200406142015.126982-1-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Chris Packham authored
commit 94c0b013 upstream. If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use the block-size value for both. Per the devicetree spec cache-line-size is only needed if it differs from the block size. Originally the code would fallback from block size to line size. An error message was printed if both properties were missing. Later the code was refactored to use clearer names and logic but it inadvertently made line size a required property, meaning on systems without a line size property we fall back to the default from the cputable. On powernv (OPAL) platforms, since the introduction of device tree CPU features (5a61ef74 ("powerpc/64s: Support new device tree binding for discovering CPU features")), that has led to the wrong value being used, as the fallback value is incorrect for Power8/Power9 CPUs. The incorrect values flow through to the VDSO and also to the sysconf values, SC_LEVEL1_ICACHE_LINESIZE etc. Fixes: bd067f83 ("powerpc/64: Fix naming of cache block vs. cache line") Cc: stable@vger.kernel.org # v4.11+ Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz> Reported-by: Qian Cai <cai@lca.pw> [mpe: Add even more detail to change log] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Christophe Leroy authored
commit b61c38ba upstream. WRITE_RO lkdtm test works. But when selecting CONFIG_DEBUG_RODATA_TEST, the kernel reports rodata_test: test data was not read only This is because when rodata test runs, there are still old entries in TLB. Flush TLB after setting kernel pages RO or NX. Fixes: d5f17ee9 ("powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX") Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/485caac75f195f18c11eb077b0031fdd2bb7fb9e.1587361039.git.christophe.leroy@c-s.fr Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ahmad Fatoum authored
commit f1baca88 upstream. 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") introduced an unintended linker error for i.MX6 configurations that have ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE, nor ARM_PSCI_FW are selected. Fix this by having v7_cpu_resume() compiled only when cpu_resume() it calls is available as well. The C declaration for the function remains unguarded to avoid future code inadvertently using a stub and introducing a regression to the bug the original commit fixed. Cc: <stable@vger.kernel.org> Fixes: 512a928a ("ARM: imx: build v7_cpu_resume() unconditionally") Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de> Tested-by: Roland Hieber <rhi@pengutronix.de> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Paulo Alcantara authored
commit 0fe0781f upstream. SMB2_open_init() expects a pre-initialised lease_key when opening a file with a lease, so set pfid->lease_key prior to calling it in open_shroot(). This issue was observed when performing some DFS failover tests and the lease key was never randomly generated. Signed-off-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com> Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by: Aurelien Aptel <aaptel@suse.com> CC: Stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Luca Coelho authored
commit 1edd56e6 upstream. In the reference BIOS implementation, WRDS can be disabled without disabling WGDS. And this happens in most cases where WRDS is disabled, causing the WGDS without WRDS check and issue an error. To avoid this issue, we change the check so that we only considered it an error if the WRDS entry doesn't exist. If the entry (or the selected profile is disabled for any other reason), we just silently ignore WGDS. Cc: stable@vger.kernel.org # 4.14+ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=205513 Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/iwlwifi.20200417133700.72ad25c3998b.I875d935cefd595ed7f640ddcfc7bc802627d2b7f@changeid Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-